Reviews Viscosity Of Water

The Enchanted Files: Cursed

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Promare [Blu-ray]

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Hot Stuff Instant Glue Pro Kit Includes CA Glues Accelerator Debonder Extra Spouts HK-1

  • [Hot Stuff Original] Thin CA Glue with a viscosity (3cps) similar to water and no surface tension. Have the parts that fit exactly together, get them....
  • [Super T MEDIUM] Gap-Filling CA Glue has a viscosity (200-300 cps) similar to syrup. This super glue is perfect for gluing somewhat porous materials....
  • [Special T THICK] Ultra Gap-Filling CA Glue has a viscosity (1150-1500) similar to honey. Works great when you use it to bond both porous and....
  • [NCF Quick Accelerator] is the best accelerator you will find anywhere. All of our accelerators dramatically decrease the curing time of the glue and....
  • [US-1 Super Solvent] is the very best product to debond and dissolve CA Glues from our kit, and it will also remove super glue made by other....
Check Stock

CORSAIR 7000D AIRFLOW Full-Tower ATX PC Case, White

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

BSI / Taytools Bob Smith Industries 5 Piece Set Cyanoacrylate CA Super Glue Including Thick, Medium and Thin Viscosities Accelerator and Debonder Fine Tip Applicators 1-2 Ounce Bottles

  • Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
  • Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
  • Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
  • Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
  • INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..
Check Stock

Homemade Perfume: Create Exquisite, Naturally Scented Products to Fill Your Life with Botanical Aromas

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Starbond EM-600 Medium Thick Premium CA - Cyanoacrylate Adhesive Super Glue for Woodturning Hobby Screen Printing Lapidary 2 Ounce

  • ✅ PREMIUM ETHYL CYANOACRYLATE SUPER GLUE BUNDLE SET - LAB TESTED FOR OPTIMAL PERFORMANCE: High performance industrial grade adhesive. Water-thin CA....
  • ✅ EXTRA SUPPLIES: 3 SETS OF — (2) applicator caps, (1) clog-free stopper, and a bag of micro-tips for precision. The extra applicator caps are in....
  • ✅ "WICKING TYPE" THIN ADHESIVE: Great for woodturning finish, pen turning & pen making, inlays. | "MULTI-PURPOSE" ARTS, CRAFT & HOBBY ADHESIVE:....
  • ✅ THIN CA PROPERTIES: Viscosity: 2-3 cPs (thickness of the liquid similar is to water). | MEDIUM CA PROPERTIES: Viscosity: 150 cPs (thickness of the....
  • ✅ LONG LASTING SUPERIOR SHELF LIFE: Starbond CA glues have a shelf life of several years in the cold. Store the bottle under 40°F before AND after....
Check Stock

Viscometer Adapter 0 Rotor for Digital Rotary Viscometer Viscosity Meter Tester, Low-Viscosity(0-20mPa.s) Liquids Test

  • 1.According to ASTM D 4212 (Standard Test Method for Viscosity Cup Immersion)standards.
  • 2.Quickly measures the viscosity of liquids such as paint, lacquer, varnish, syrup and oil..
  • 3.Viscosity is expressed in Zahn seconds which are correlated to viscosity in centistokes.
  • 4.Mainly in order to maintain the stability of the viscosity of the product in the process of use, so that the viscosity is always maintained at the set range to protect the color of the product effect..
Check Stock

LFJD 6 Heads Liquid Filling Machine 3-5000ml Fille Bottle Filler Digital Control Filler Pump Stainless Steel 110V (6 Heads)

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

GLTL Paint-4 Liquid Viscosity Test Tool w/Viscometer Flow Cup Viscometer Ford Cup 4# Flow Viscosity Cup Liquid Flow Meter Liquid Viscosity Tester with Base

  • ★It is made of relevant standards-ASTM D1200-2010《 Standard Test Method for Viscosity by Ford Viscosity Cup》.
  • --The correction coefficient K value is the time after the filling of the viscosity cup with the secondary standard oil under the set temperature conditions (such as 20 °C ± 0.1 °C), the flow time should be in the range of 30s ~ 100s, the K value should be 1 ± Within 0.03 range. The viscometer should be periodically calibrated to the extent of its frequency of use..
  • ★ 4 Viscosity Cup belongs to laboratory, workshop, control and test instruments. The measured viscosity is conditional viscosity. Namely: a certain amount of sample, at a certain temperature, from the prescribed diameter of the hole flow out of time..
Check Stock