Reviews Unique Red Tail Light

2014-2019 C7 Corvette Morimoto Aventador-Style LED Tail Lights

  • ...light comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”.
  • Upgraded Unique Design: Niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires.
  • Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
  • Universal Application: Work on a 12 V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before you purchase..
Check Stock

Nilight - TL-07 6 Inch Oval Red Led Trailer Tail Lights 4PCS 10 Led with Flush Mount Grommets Plugs IP67 Waterproof Stop Brake Turn Trailer Lights for RV Truck

  • ...ight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”".
  • Upgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wiresUpgraded Unique Design: Nilight's tail light has unique “ears” on its two sides, upgrade notches on the inside of the grommet, and a tighter attaching ability between the 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly to the light. Shake proof, there will be no worries of loosing light or wires.
  • Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.
  • Universal Application: Work on a 12 V DC system, function as turn/Brake light, tail light for al....
Check Stock

Tail Light [Eagle Claw Design] DOT Approved Brake Running Lights Motorcycle LED Taillight Compatible with Harley Sportster Dyna Softail Touring Road Glide Road King 1 PCS

  • 【EAGLE CLAW DESIGN】New and cool led tail light lay down style. Black with red lens, clear protective cover. The back shell of motorcycle led tail....
  • 【LIGHTING MODE & SPECIFICATIONS】Red(running), Bright red(brake), White(license plate), The tail light comes with Osram led chips, voltage - DC 12V....
  • 【EASY INSTALLATION】It's easy to install the led tail light. Wire connection: black-ground, blue-running light, red/yellow-brake light, Insert the....
  • 【REFUND IF NOT APPLICABLE】Fitment: [Sportster] XL1200C Custom(1999-2006), Custom (EFI) (2007-2010), XL 1200S sport(2000-2003), XL883 (2004-2006),....
  • 【PACKAGE INCLUDED】1 Pcs tail light + 1 Pcs electrical connector. 12 months warranty. SHOP WITH CONFIDENCE: (1) Not fit for your vehicle= Return it....
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

Partsam 2x Universal 16 LED Stop Tail Turn Signal Backup Reverse Brake Clearance Marker Lights Lamps Red/White Replacement for Jeep YJ JK CJ Truck Trailer Waterproof 12V

  • Partsam (2 x Red/White) stop / turn / tail /signal and backup lights for Truck Trailer..
  • This square stop turn tail light is universal, Also you can DIY it to suit for Jeep YJ JK ,Jeep CJ CJ-7 CJ-5 ( NOT factory Jeep light, Modification is needed. ).
  • Note: license plate light is not included!.
  • Combo functions as stop, turn, tail, back-up light, and reflectors for most 12V vehicles like Jeep, trailers, trucks, SUVs, RVs, caravan,vans, boats etc..
  • Each equiped with 16pcs LED lights inside, including 12 red square LEDs (Stop,Turn & Tail) & 4 white square LEDs (Back-up/Reverse).
  • ☛☛No License Plate illuminator and side indicators Included ☚☚.
  • EASY TO INSTALL: Black wire is the GROUND.
  • Black+Brown, Red light is low brightness.
Check Stock

ANKIA Motorcycle Chopped Rear Fender Edge LED Brake License Plate Tail Light Stop Running Light Turn Signal Lamp for Harley Sportster XL883N 1200N XL1200V XL1200X Red

  • The Motorcycle Tail Light Working Voltage: DC 12V.Wattage:1.44W(8 LED,0.18W/LED). Light Color: Red. Lens Color: Red/Smoked black/transparent.....
  • Standard Fender Edge LED tail light for Harley Davidson,used for running light,brake stop light,rear tail light, license plate light,turn signal light.
  • Motorcycle Stop Light Curved design provides perfect match to the chopped rear fender.
  • Led Motorcycle Brake Light 5 Wires Connection System: GND (Black wire).
  • Motorcycle Tail Light Fitment:For Harley Davidson 2004-2014 Sportster 883,Sportster 1200.
Check Stock

KATUR 1Pcs Red 12V Motorcycle Tail Light Brake Stop Running Light with License Plate Holder Black Compatible with Harley Bobber Chopper Cruiser Dyna Glide Sportster

  • √ 1Pcs Motorcycle Tail Brake Light,1Pcs Motorcycle License Plate Bracket.
  • √ Fits: Most Motorcycle, Custom Bike, Cruiser, Chopper, Bobber ,Cafe Racer ect..
  • √ Application:Function as Running Tail Light, Brake Stop Light, License Plate Holder,etc.
  • √ Housing Color: Black,Light Color: Red,Lens Color: Red,Voltage: 12V,Wattage: 20W (20W incandescent light bulb),Thread Diameter: 8mm (not included in package),Adjustable Mounting Slot Spacing: As the picture shown,Cable Length: 9.85" (25cm),Material: Good Quality Steel Housing + PC lens,Weight: 300g,3 wires connection system..
  • √ Recommended Reason:Made of High Quality Steel Housing and PC Lens,Designed for Most Custom Motorcycle,Upgrade your motorcycle a Unique Style Appearance.
Check Stock

Partsam 2Pcs LED Triple Tail Lights 45 LEDs, Rectangle Vertical or Horizontal Mount LED Trailer Camper RV Tail Lights Stop Turn Tail Backup Reverse Lights Taillights w/ Black Base - Red/Clear Lens

  • Package includes 2 Pieces led triple horizontal mount taillights FULL LEDs featuring a black recessed base with 8 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light.
  • These Recessed Triple Vertical Taillights include 3 red lenses: 2Pcs replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector).
  • This Led triple tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application.
  • This LED Triple Tail Light is hardwired with 8 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights.
  • NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you'll have hyper flash on your turn signal.
  • Overall dimensions: Overall length is 14.17 inches approx., and overall width is about 7 inches, and the tail light is about 0.87 inch thick, requiring 13.4 inches long x 6.3 inches hole to hole cutout for complete installation. Really a nice slim profile unit.
Check Stock

2 Pcs 7\ Oval LED Trailer Tail Lights Surface Mount 10 LED Turn Signal Brake Lights Stop Light Side Light for RV Trucks Camper SUV

  • ☀️Super Bright: Each trailer tail light is equipped with 10pcs super bright LED chips, providing maximum visibility and safety. Compared with halogen bulb, leds have the characteristics of fast light emission, low energy consumption, and high brightness..
  • ☀️Excellent Performance: CAUORMOTE oval rear tail lights are made of high-quality materials, using ultrasonic welding technology to ensure waterproof, shock-proof and dust-proof sealing. Everything we do is to make it easier for you to cope with the complicated climatic environment such as rainy and foggy..
  • ☀️Wide Applications: The red brake light for truck car can be used as tail light, turn signal, stop light, side marker light, clearance light, rear light. Ideal for most 12V vehicles and devices such as trucks, trailers, bus, RV, pickup, tractors, semi-trailer, boat trailer, horse trailer, travel trailer, dump truck, special vehicle, etc..
  • ☀️Simple Installation: Black Wire - ground, Red wire - high brightness for brake/stop light, Blue wire - low brightness for tail/running light. Do not plug and play, this tail light is hard wired and needs to be installed with screws..
  • ☀️What You Will Get: 2 Pcs trailer tail brake light included. If you have any questions about our trailer tail ....
Check Stock

Partsam 8Pcs 4" Round Red LED Trailer Tail Light, 4 Inch Round Led Stop Turn Tail Lights Brake Brake Trailer Lights for RV Trucks, Rubber Grommets and 3-Prong Wire Pigtails Included

  • Package includes 8 Pieces 4 inch Round Led Stop Turn Tail Lights Red, Grommets and 3-prong wire pigtails are included for complete installation.
  • This Waterproof round led trailer lights 12 LED serves 3 functions as stop light, turn signal light and tail light.
  • Recessed mount with grommet and Pigtails.
  • These round tail lights are Approx. 5 inch diameter Grommet Ring and 4" inner diameter and 1 3/16" Thickness.
  • IP65 waterproof light fixture and effectively withstand the invasion and corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: White is the ground, red is the high brightness for stop light / turn light / brake lights and Black for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail lights are compatible with almost All automobi....
Check Stock