Reviews Tungsten Alloy Disc

Thomastik Strings for Cello Versum Solo complete set 4/4 medium VES400

  • D: special design made out of lightweight aluminium and plastic-coated wound copper.
  • G: tungsten/chrome wrapping on multi-alloy spiral core.
  • C: tungsten/chrome wrapping on multi-alloy spiral core.
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

KIPA Brush Cutter Trimmer Blade Tungsten steel 10" Diameter 3 Teeth with 20mm arbor washer For Many Stihl Husqvarna Sears Echo Poluan Redmax Shindaiwa Weed eater Brusch Trimmer durable

  • 10" 3 Teeth STANDARD Durable Tungsten steel Trimmer Brush cutter Weed Eater Blade.
  • Universal Fit either 1" (25.4mm) or 20mm Arbor Hole sizing with your "Blade Hardware" You can measure "Washer" thickness with a Caliper, the Washer is the exact thickness of the blade and will even smash somewhat when firmly tightened.
  • BLADE HARDWARE -- A Blade will Not fit onto the Trimmer Axle Shaft by itself like the String Line Dispenser Spool will. So you must acquire "Blade Hardware" that consists typically of two small discs.
  • one has a raised circle,on it that the blade hole fits onto, the 2nd small disc is the cap disc, then screw on the Nut and apply a Cotter Pin. blade hardware is not included.
  • Tungsten steel -- is estimated to last 10x longer than plain steel but does not cost 10x more creating incredible value. make for a better Tungsten steel for longer lasting teeth.
  • Fit For A lot of straight shaft trimmers including Stihl Husqvarna Sears Husky Poulan shindaiwa Redmax Echo and Many others.
Check Stock

Diablo by Freud Diablo DOU5S 5 pc Universal Fit General Purpose Oscillating Blade Set (5-Piece)

  • ...lar Saw Blade Set with 3/8" Arbor. 2 pack 24T TCT blade for wood, 1 pack 60T HSS blade for sheet metal, 1pack 60# diamond disc for tile, meet your everyday needs..
  • 24T TCT BLADE: Manufactured with durable premium alloy steel material, with hardened,fully polished and chrome plated surface, sharper construction-grade tungsten carbide teeth, for long-lasting cuts in wood, plastic, and composite materials..
  • 60# DIAMOND DISC: Manufactured with high quality and durable heat-treated manganese steel and #60 diamond grit can provide longer cutting life.The segmented design improves airflow, helps the saw blade to dissipate heat, and remove cutting dust, provides a smooth, fast, clean and efficient cutting, Max 13,000 RPM, ideal for cutting ceramic tile, stone tile, backer board and cement..
  • 60T HSS BLADE: Manufactured with high-speed steel, more durability.Sharp saw blade cutters with thin kerf ensure smooth, fast and accurate cutting with impressive results. Ideal for thin sheet metal and aluminuim , wood, plastic and drywall..
  • COMPATIBLE:These circular saw blades are compatible to use with electric circular saw with arbor of 3/8in(9.5mm). Compatible with RK3441K & RK3440K 4-1/2 inch Compact Circular Saw., WORX WX429L and PORTER-CABLE Pce381..
Check Stock

Firecore 4-1/2 Inch Wood Carving Disc for Angle Grinder Circular Saw Blade Carving Disc Stump Blade for Plastic Cutting Grooving Carving and Shaping 7/8 Arbor - 115mm

  • MULTI-PURPOSE CARVING TOOL: Firecore Wood Carving Disc for Angle Grinder is suitable for polishing, grooving, shaping, grinding and cutting all kinds....
  • NO OVERHEATING: With special construction, angle grinder wood carving disc creates reasonable radial resistance value at high rotation speed rates (up....
  • SMOOTH AND PRECISE CUTTING: Thanks to 3 semicircle YG8 tungsten carbide teeth, Firecore angle grinder cutting disc reduces drag and ensures smooth and....
  • NO KICKBACK: Firecore wood carving disc for angle grinder has a unique form where disc's body has feed stop that ensures NO KICKBACK, it is safer to....
  • OPTIMIZED TOOTH GEOMETRY: Firecore angle grinder wood cutting disc is made of premium instrumental steel and hardmetal teeth with laser sharpening,....
Check Stock

Disston E0104578 1-1/4-Inch RemGrit Carbide Grit Arbored Hole Saws 32mm

  • Cutting edge of tungsten carbide particles bonded to alloy steel back.
  • High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
Check Stock

YUCHENGTECH Ionizing Air Blower Static Eliminator Anti Static Fan HFAC ESD Ionizer Fan Anti Static Blower (110V)

  • 1.【High-frequency AC】◈ Frequency up to 68000Hz, with high ion density, and better effect of removing static electricity. (Traditional Low Frequency: 50 / 60Hz)..
  • 2.【Upgrade dual cleaning function】◈ With automatic cleaning and manual cleaning function, built-in cleaning brush, set cleaning time, can clean automatically.
  • needle seat can be disassembled freely, also can be cleaned manually, convenient for maintenance..
  • 3.【Fast to remove static】◈ Ionizing air blower adopts high frequency technology, with large air volume, widely air flow coverage area and high efficiency electrostatic removal..
  • 4.【Tungsten Alloy Ion Needle】◈ Compared with ion needles of other materials, tungsten alloy ion needles contain tungsten up to 99% and have good ion balance, quickly neutralize static electricity,the service life can reach 20000 hours..
  • 5.【Ionizing Air Blower】◈ Discharge Time: .
Check Stock

GE Forge 14' Hoof Nipper

  • Used by Horse Owners, Veterinarians, Zoo Keepers and Professional Farriers - Perfect for regular maintenance trimming and shoeing – Essential for corrective trimming for laminitis type issues such as sole abscesses, white line, hoof wall cracks and founder..
  • Eliminates struggling with hand tools - Trimmer designed to operate using one hand - Trim faster and reduce the stress on you and your animal.
  • Set Includes: Mobile Battery Powered 20 volt Trimmer, 4-Tooth Tungsten Carbide Coated Cdisc, Red Dome Top Power Rasp, Orange Dome Top Course Grit Rasp. Green "V" Groove Corrective Disc, 50 Grit Buffing Sander Disc, Black Cut-off Disc, Diamond Coated Chain File, Wrap Around Safety Glasses, Canvas Tool Bag, Print Instructions, Hex Key, Tail Tie, and Flange Holder.
  • Convenient, safe and easy to operate - Easily powers through extremely dry hooves – Helps reduce pain in the wrist, hand, arm and back - Enjoy a smoother, pain free trimming experience.
  • Powered by DeWalt 20 volt Lithium-Ion Battery (BATTERY NOT INCLUDED) - Easy access - attaches to your belt, apron or toolbox.
Check Stock

Unique GESTALT® Tungsten Cross Pendant. Dark Wood Inlay. 4mm Wide Surgical Stainless Steel Box Chain. 22Inch Length

  • 0.04 carat Lab Grown Diamond is White (G-H Color) and SI1 Clarity with Excellent Cut and Luster.
  • Disc is both Sophisticated and Stylish and can be worn 24/7.
  • 100% Satisfaction Guaranteed and a Lifetime Exchange Guarantee.
Check Stock

Aodaer 4 Pieces Angle Grinding Wheel 6 Teeth Wood Turbo Carving Disc Grinder Chain Disc in 22 Teeth Wood Polishing Shaping Disc for Wood Cutting and Polishing Sanding Carving Grinding Wheel Plate

  • ...er chain disc is 4 inches/10 cm in diameter.
  • the angle grinder disc has a diameter of 3.3 inches/8.4 cm, an inside diameter of the hole is 0.63 inch/1.6 cm.
  • wood turbo carving disc has a diameter of 3.54 inches/9 cm, an inside diameter of the hole is 0.63 inch/1.6 cm.
  • Reliable material: angle grinder disc is made of tungsten carbide, sturdy and durable, not easily fractured or deformed.
  • the 6 teeth wood carving disc is made of heavy-duty carbide, which makes the tool more durable, abrasion resistant, and have anti-blocking function.
  • the grinder chain disc has good rust and corrosion resistance, can be applied for a long time.
  • Improve efficiency: the angle grinder disc is made of hundreds of sharp teeth that quickly remove residues and are more durable, saving you time and effort.
  • wood turbo carving disc and wood shaping disc cutting is fast and efficient, and helping you to achieve higher productivity.
  • Multi-purpose utility tools: wood carving disc and 22 teeth grinder chain disc are only applied to non-metallic items or materials, can be used for wood, easy to operate, used for polishing, carving, grinding, cutting the fine woodworking tools.
  • multi-functional woodworking tools to meet your various requirements.
  • Package content: 1 piece of 22 teeth grind....
Check Stock