Reviews Copper Tungsten Alloy

Tungsten Alloy Rod - 0.50\ Diameter x 12\ Length, 90% Tungsten, 6% Nickel, 4% Copper

  • DENSE: 17g/cc - 90% Tungsten, 6% Nickel, 4% Copper alloy rod shipped to you free via Amazon Prime!.
  • SIZE: 0.50" dia. x 12" length with tolerance: (-0/+0.003" dia.) (-0" length).
  • QUALITY manufacturing via pressing and sintering, all rods are lot controlled, stress relieved, and conform to ASTM B777.
  • FREE material cert will be provided with in safely packaged shipment.
  • UNITED STATES based manufacturing & customer service staff are here to help you.
Check Stock

Tungsten Alloy Rod - 1.500\ Diameter x 12\ Length, 90% Tungsten, 6% Nickel, 4% Copper

  • DENSE: 17g/cc - 90% Tungsten, 6% Nickel, 4% Copper alloy rod shipped to you free via Amazon Prime!.
  • SIZE: 1.500" dia. x 12" length with tolerance: (-0/+0.003" dia.) (-0" length).
  • QUALITY manufacturing via pressing and sintering, all rods are lot controlled, stress relieved, and conform to ASTM B777.
  • FREE material cert will be provided with in safely packaged shipment.
  • UNITED STATES based manufacturing & customer service staff are here to help you.
Check Stock

Tungsten Alloy Rod - 2.000\ Diameter x 12\ Length, 90% Tungsten, 6% Nickel, 4% Copper

  • DENSE: 17g/cc - 90% Tungsten, 6% Nickel, 4% Copper alloy rod shipped to you free via Amazon Prime!.
  • SIZE: 2.000" dia. x 12" length with tolerance: (-0/+0.003" dia.) (-0" length).
  • QUALITY manufacturing via pressing and sintering, all rods are lot controlled, stress relieved, and conform to ASTM B777.
  • FREE material cert will be provided with in safely packaged shipment.
  • UNITED STATES based manufacturing & customer service staff are here to help you.
Check Stock

Torrey Hills Tech Ground Microgram 0.1875\ Diameter x 12\ Length Tungsten Carbide Rod

  • DENSE: 17g/cc - 90% Tungsten, 6% Nickel, 4% Copper alloy rod shipped to you free via Amazon Prime!.
  • SIZE: 1.500" dia. x 12" length with tolerance: (-0/+0.003" dia.) (-0" length).
  • QUALITY manufacturing via pressing and sintering, all rods are lot controlled, stress relieved, and conform to ASTM B777.
  • FREE material cert will be provided with in safely packaged shipment.
  • UNITED STATES based manufacturing & customer service staff are here to help you.
Check Stock

MIDWEST TUNGSTEN SERVICE Element 1 inch Cube Set (Tungsten/Copper/Titanium/Aluminum/Magnesium)

  • STYLISH 1"x1"x1" element cubes are engraved with metal characteristics set in an ultra modern display base.
  • AWE INSPIRING set includes 1 tungsten alloy cube, 1 aluminum cube, 1 titanium cube, 1 copper cube, and 1 magnesium cube.
  • SAFE for all ages! The element cubes are non-toxic and the edges are rounded for safe handling.
  • PERFECT for classrooms, offices, co-working spaces, science departments, and home schools.
  • THE ULTIMATE holiday gift, everyone will want one.
Check Stock

Genmitsu 6pcs 3-Flute Square End Mill for Aluminum Applications, Nano Blue Coat CNC Router Bits, High Feed U-Type Design, for Roughing and Finishing, 1/4’’ Shank, SN06A

  • High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
  • Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
  • Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
  • Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
  • Attain excellent production rates thanks to the strong tooth with double relief angles..
  • Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machin....
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

DIDUEMEN Handheld Without Debugging Tungsten Electrode Sharpener TIG Welding Rotary Tool with Flat Grinding Block Cut-Off Slot Multi-Angle & Offsets

  • Caution: When using this tool, please wear a mask and other protective gear..
  • Miniaturization and High Performance：This tungsten sharpening grinder is a hand-held tool. It is small enough to fit on the TIG table, saving the....
  • Simple and Convenient Operation: Unlike the single-head configuration, this tungsten grinding machine does not require installation and debugging.....
  • 4 Size Brass Tungsten Guide Rails and Four-angle Screw Holes: The tool has four copper tungsten guide rails: 0 / 40 inch, 1 / 16 inch, 3 / 32 inch and....
  • Cut-Off Slot and Rotary Tool : Tungsten sharpening tool also has tungsten cut-off port processing. After the tungsten you are using is worn or....
Check Stock

ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating

  • ...ble with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40..
  • Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible..
  • AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
  • Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
  • 35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its greater strength and cap....
Check Stock

Plasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF

  • ...portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
  • The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
  • ✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
  • ✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
  • ideal for a welding enthusiast or hobbyist with basic repair needs and general light welding requirements. We have 12 month warranty..
  • ✅ 【 Package Content】1 X 2.5M PT-31 plasma cutter torch....
Check Stock