Reviews Transmission Cooler With Splice Fittings

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

...n fittings feature a reusable spin-lock connector.
Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted: Professional installation and Adjustable AN ....

PACKAGE INCLUDE - 2 x 70 inch 3/8 I.D. Stainless Steel Braided Hoses.
2 x AN-6 flared to 1/4 In NPT billet adaptors.
4 x AN-6 flared to 3/8 In NPT billet adaptors.
4 x 90-degree AN-6 inverted flare to AN-6 flare billet adaptors.
COMPATIBILITY - MuHize 70 inch transmission cooler hose fits for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E..
DURABILITY - This transmission cooling line kit is made of high-strength PTFE(Teflon), which is resistant to high & low temperatures and is anti-corrosion. The precision braided stainless steel on the outside of the hose greatly increases the strength of the tube..
ANTI-LEAKAGE - The interface is covered with black rubber, which can effectively prevent leakage and ensure the normal operation of the hose..
DIFFERENT FITTINGS - Different sizes of fittings are for different cars and turbos. Please check as much as possible to make sure the transmission cooling hose is the one that you need..

Separates fittings on fuel lines, fuel filters, fuel tank return lines and transmission cooler lines.
Fits 1990 to current Ford Aerostar, Explorer, Bronco with 3/8" fuel lines.
1991 to current Ford E & F Series trucks with 3/8" fuel lines.
1992 to current Ford Ranger with 3/8" fuel lines.

Direct fit for 1999–2014 Chevrolet Silverado / GMC Sierra 1500 V8.
72% increase in coolant capacity over stock.
69% increase in surface area over stock & 92% thicker than stock radiator.
46°F reduction in coolant outlet temperatures over stock.
Includes both transmission and oil cooler ports with pre-installed fittings as well as the Mishimoto Lifetime Warranty.

Fitment:LPD47391 Advanced Cooling Protection for Car, Van, Light Truck, R.V. and Towing Applications.Suitable for applications up to 40,000lbs Gross Vehicle Weight.
High-Quality: Precise fin Spacing.Reliable, Durable Brazed Aluminum Construction..
Function:Self-regulating flow for maximum lube flow protection through cold start-up, varied temperatures and driving conditions, heavy loads and towing.
Package included: Transmission Oil Cooler,Bolts, nuts, washers, mounting straps, Brass fittings, high-quality cooler hose,hose clamps(No installation instructions).
NOTE: This kit is NOT intended for operation below 32 degrees Fahrenheit.

Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
Package Include -about 70 inch & 3/8" I.D. Stainless Steel Braided Hoses.
/ AN-6 flared to 1/4" NPT billet adaptors.
/AN-6 flared to 3/8" NPT billet adaptors.
/90 degree AN-6 inverted flare to AN-6 flare billet adaptors.
SS Braided Transmission Cooler Hose Line.
1 year warranty for it.If you have any problem ,please contact us and we will respond you on 24 hours.

Upgraded replacement – this transmission oil cooler line is made of stainless steel for increased durability.
Application specific – made to match the fit the function of the original line on certain Subaru Forester and Impreza model years.
Complete repair – comes with fittings and brackets attached for installation.
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience.
Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage.

FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings..
FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes..
EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
WHAT YOU GET: The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
DURABILITY: All fuel line quick disconnect heater hose disconnect tools are made of hard plastic to secure the strength and sturdiness..

Reliable replacement – this automatic transmission oil cooler hose is precision-engineered to replace the stock hose assembly on specific vehicles.
Quality construction – manufactured from metal and rubber with OE-style fittings to provide a reliable replacement.
Excellent value – OE quality at a lower price.
Vehicle tested – has undergone on-vehicle testing to ensure quality, proper fit and performance.
Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Garage.

Reliable replacement - this automatic transmission oil cooler hose is precision-engineered to replace the stock hose assembly on specific vehicles.
Quality construction - manufactured from metal and rubber with OE-style fittings to provide a reliable replacement.
Excellent value - OE quality at a lower price.
Vehicle tested - has undergone on-vehicle testing to ensure quality, proper fit and performance.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.