Reviews Toyota Repair Tool

Foxwell NT510 Elite Bi-Directional All System Scan Tool for Toyota Lexus Scion with Hard Storage Case

  • 【Made for Toyota Lexus Scion Vehicles】FOXWELL NT510 Elite OBD2 scanner is a 2019 upgraded version of NT510 with more powerful compatibility.This Toyota car obd2 scanner is capable of reading and clearing trouble codes of all major systems of Toyota Lexus Scion vehicles, including engine, airbag, transmission, ABS, SAS, DISA, DSC, SZL, TPMS, ect. (Please note, the year supported may vary on different car makes and models.).
  • 【Full Service and Maintenance Features】The diagnostic scanner can works on the latest 2018 /2019 Toyota car models. This scanner tool helps users to access to the vehicle systems to reset partial parameters’ status after repair and maintenance. Such as ABS/SRS Services(including ABS Bleeding), Oil Service Reset, EPB, TSAS(Steering Angle Sensor) Calibration, DPF(Diesel Particulate Filter) Regeneration, Traction and Throttle Body Adjustment,Battery Registration,CBS condition-based Service Reset..
  • 【Enhanced Full Obdii Diagnosis 】The code scanner gives you a comprehensive OBD 10 modes diagnosis on global EOBD/OBDI/OBDII vehicles with Live PCM Data Stream in graphics formats, Read/Clear DTCs and do smog tests, I/M readiness and O2 sensor tests, read freeze frame data, EVAP system test, retrieves vehicle info, Malfunction Ind....
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8.
  • and 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
Check Stock

LAUNCH X431 PRO5 Scan Tool, 2022 Car Diagnostic Scanner Upgraded of PRO3, J2534 ECU Programming & Coding, CANFD, DOIP, 50+ Services, VAG Guided Functions,with SmartBOX 3.0 for Workshops,2 Years Update

  • ...calibrations, etc. for FCA group vehicles..
  • 【POWERFUL VCI: SMARTBOX 3.0】To manage your repair jobs smartly and conveniently with greater integration, the newly-developed LAUNCH X431 Smartbox 3.0 is compatible with all new J2534/DOIP/CANFD protocols giving you power to access data and OE programming downloads for Toyota, Honda, Volvo, VW, GM, Chrysler, Benz, Jaguar, Land Rover, GE, and BMW E/F/G Chassis. It also serves as a wireless VCI allowing the vehicle to transmit data to the diagnostic tablet without a physical connection..
  • 【50+ HOT SERVICES, ALL SYSTEM DIAGNOSTICS】LAUNCH X431 PRO 5 helps you perform a variety of crucial advanced service functions to make servicing a breeze in the workshop, which include multiple resets for Oil, SAS, EPB, TPMS, Immobilize....
Check Stock

Motivx Tools Oil Filter Wrench, Drain Tool, and Advanced Engine Oil Funnel Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing the Motivx Tools MX2320 cartridge style oil filter wrench, MX2341 oil filter drain tool, and MX2301 threaded oil funnel for Toyota and Lexus vehicles..
  • These tools only fit 2.0L to 5.7L engines that use the cartridge style oil filter system. They do NOT work on engines that use standard spin-off style oil filters. The drain tool is not compatible with some 2wd Lexus vehicles..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap, a oil filter drain tool for draining the filter housing before removing, and a hands-free Toyota threaded drain funnel for refilling the engine with oil..
  • High quality forged wrench is included for quick and and easy removal of over-tightened canister filters on many late model Toyota vehicles..
Check Stock

102Pcs Car Air Conditioning Valve Core Kit, Auto AC Repair Complete Tool Box Set, A/C R12 R134A 100Pcs Refrigeration Tire Valve Stem Cores, 2Pcs Removal Tool, for Car Air Contitionaing Repair

  • [PACKAGE] This Professional Car Air Conditioning Valve Core Kit include: 100 Tire Valve and 2 remover tool..
  • [ADAPTER MODEL] High and low pressure type, Replacement for most of car and 134A / R12. It includes 99% of the valves that fit the cars driven in the USA, Japanese (for toyota, honda, lexus, nissan...) and Korea (for hyndai, kia...)..
  • [Universal Compatibility] Applies to the replacement refrigerant valve core leak, suitable for car air-conditioning replacement and maintenance. Also great for mechanic and A/C repair shops..
  • [EASY TO CARRY] This repair kit has Separated space for each specification tool, convenient to select, collect and carry..
  • [DURABILITY] Bear the impact, the freon(F12 R134a),the oil, watertightness and the corrosion. If you have any questions or problems, you can contact us at any time by sending emails. We’re guaranteed to REFUND or REPLACEMENT within 24 hours..
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

EWK Oil Change Tool Set - 64mm Oil Filter Wrench, Drain Hose, Oil Funnel for Toyota, Lexus, Scion 2.0L - 5.7L Oil Filter Systems

  • 【 Convenient Set 】 Includes every tool you need to remove and refill the engine oil, the Toyota oil filter wrench for removing the oil filter housing cap, an oil filter drain hose for draining the filter housing without splatter, and a threaded-on oil funnel for refilling the engine oil..
  • 【 Wide Applications 】 The 64mm Toyota oil filter tool and funnel fits most Toyota, Lexus, and Scion vehicles. Such as RAV4, Camry, Tundra, Highlander, Sienna and more equipped with 2.0L to 5.7L / 6 & 8 cylinder engines that use Toyota's cartridge style oil filter system..
  • 【 Clean & Fast Oil Change 】 The drain tool makes the oil change process much cleaner by directing oil flow right into your oil pan to prevent splatter. To refill the oil, simply leave the whole oil bottle in the leak-proof oil funnel to completely drain while retrieving to open the next one..
  • 【 Tough and Sturdy 】 EWK 14 flutes oil filter socket for Toyota is forging from aluminum instead of casting, which provides enough power to rotate the over-tightened oil filter cap without stripping the flutes on your plastic housing..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any pro....
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
Check Stock

ACROPIX Front Windshield Washer Hose Kit Fit for Toyota 4Runner with 3 Meter Washer Fluid Hose 12 Pcs Hose Connectors - Pack of 15 Black

  • Fit for Scion tC 2011-2016, for Scion xB 2008-2015, for Scion xD 2008-2014, for Toyota 4Runner 2010-2021, for Toyota Corolla 2009-2010, for Toyota Highlander 2008-2013, for Toyota Matrix 2009-2013, for Toyota RAV4 2010-2012.
  • To replace your broken washer nozzle with fitting replacement part.
  • Easy Installation - just press firmly down & snap right into place. Don't be afraid to use a bit of force to get them to latch into the hood..
  • Note: Please ensure your supply lines are intact before buying this item.
  • If they are damaged, you should buy the complete repair kit and not just this sprayer nozzle. 1) aging water pipe could cause blocked water flow 2) lower water level of the water tank could cause insufficient pressure, and the water is not sprayed directly to the windshield..
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...ary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible for Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab etc.
  • Package Included: 1 x Pressure testing pump with gauge 1 X Thermometer 4 X Chromed Steel Cap Adapters 8 X Anodized Aluminum Cap Adapters 1 X Carrying Case.
Check Stock