Reviews Tool To Break Concrete

TOMAHAWK Power Screed Concrete Finishing Vibra Tool with 12 ft & 10 ft Boards Bull Float Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes 12’ and 10’ hardened aluminum boards for float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

Concrete Trowel Tools for Masonry Cement Hand Plastering Plastic,Mortar Repair Margin Finish Pointing Tile Curved for Garden Corner Flooring Molds,4x7.28inches 1PC

  • 【 Perfect Concrete Tool 】- Plastic Material, Handy and Durable, Suitable for concrete edges in garden and yard landscapes. Come with handle, Good....
  • 【How to Use】-Use a curb cutter to slip on any rough surface on the newly extruded concrete boundary kerb, slowly pushed into the concrete tool to....
  • 【SIZE and Package】-The Length is 7.28 inches/18.5 cm, Width is 5.2 inches/13cm, Height is 4 inches/10cm. Easy to hold the cement tool with one....
  • 【Easy Cleaning】 – The size and shape also makes our trowel better for pulling and laying materials or cleaning out bucket excess when finished..
  • 【Appliance】-This concrete mold suitable for concrete edges in garden/yard landscapes/lawn/garden/grass....
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

XtremepowerUS 16 Handheld Power Cutter Circular Saw Wet/Dry 52CC Gas-Powered Water Line Concrete Saw Cutter Guide Roller No Blade

  • Compact & Efficient - This compact and efficient tool from XtrempowerUS is powered by a 52 cc engine with a full 2000W for the most demanding concrete....
  • Reduced Vibrations - The new blade guard help reduced vibration, which means you can work full days without having to take a break.
  • Fine-Toned Ergonomics Design - The XtrempowerUS features a compact design, low weight & correctly positioned handles to make the machine easier to....
  • Dual Integrated Feature - Used wet or dry, the dual integrated dust management system takes the dust out of the job.
  • Ideal Power Cutter - Powerful all-around power cutter is ideal for cutting concrete and masonry in alteration, renovation and new construction work.
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

TOMAHAWK 37.7cc Gas Concrete Power Screed Cement Finishing Vibrating Motor with 10ft Aluminum Board Straight Edge Bar Vibra Finisher Set

  • 37.7cc gas power screed for concrete finishing with 4-Stroke Tomahawk gasoline engine for 7000 VPM uniform vibration over the length of the blade with near concrete bull float finishing results.
  • Includes hardened aluminum 10’ board float concrete finishing tool with straight edge, great for form-to-form or wet screeding to efficiently strike off concrete floors.
  • Work 4X Faster with this concrete vibra screed than traditional concrete finishing tool methods and save more than 75% in labor costs.
  • Easily change concrete screed blades in less than 2 minutes with this light-weight magic screed board design for projects including concrete floors, slab pours, sidewalks, driveways, and more.
Check Stock

SpeedClic Diamond Cutting Wheel - 38 mm - 2615S545JB

  • Dremel cutting disc for a fine cut in hard materials, for example concrete, stone, porcelain, ceramic and hard epoxies.
  • A diamond cutting blade produces a fine cut, is durable, does not break and retains its shape.
  • The Dremel SpeedClic system allows for quick, easy and keyless changing of accessories.
  • Cutting depth 11 mm, disc diameter 38 mm, shank diameter 3.2 mm.
  • Cutting wheel for use in Dremel rotary multi tool.
Check Stock

8MILELAKE Pneumatic Chisel Set 9pcs Air Hammer Punch Chipping Bits Tool

  • 0.39 inches Round Style shank chisels for heavy duty service work..
  • 9 kinds of different shape Air Hammer Chisel, provided the needs of different jobs..
  • Excellent quality air hammer chisel, it can used with a pneumatic tool..
  • For masonry and concrete demolition, hard surface break up and chiseling..
  • Correctly hardened and tempered so blade will not shatter when struck hard..
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

WOODPECKER ST64 Pneumatic Concrete T Nailer, 14 Gauge 3/4" to 2-1/2" Heavy Duty Air Concrete Nail Gun for Furring Strips, Masonry, Cement, Concrete Brick Nailing

  • 【Lightweight Construction & Same Function】Die-cast aluminum housing reduces device weight and ensures the tool's durability. Net weight is 4.7LBS (2.11KG). This model is smaller & lighter than ST64 Concrete T Nailer while keeping the same functions and applications. ** If nails are not demanded over 1-1/2'' (38mm) length, this tool is recommended **.
  • 【Safer in Use】A easy-switch safety lock is designed for considering fewer injuries caused by accidental shooting. Turn up is to lock and down is to release.
  • 【User-Friendly Design】Magnetic Nose allows you to secure metal steel sheets without touching.
  • The Spacious Slide-Loading Magazine is for easy loading and automatically adjusts nails length.
  • Comfort Rubber Grip helps eliminates operating fatigue.
  • 【Drives 14 Gauge Concrete Nails】Uses 14 Gauge 3/4-inch to 1-1/2-inch (18-38mm) length concrete T nails. ** Comes with 400PCS 3/4-inch (18mm) Concrete Nails For Free**.
  • 【Practical Application】Ideal tool for doing some soft masonry standard concrete nailing jobs like brick wall foundations, nailing b....
Check Stock