Reviews Tool Steels

The Edgemaker Knife Sharpener Pro 331- Perfect for Sharpening & Honing any Blade, Durable, Safe & Easy to Use- Orange

  • EDGEMAKER PROFESSIONAL SHARPENING TOOL- 331 allows you to both hone and sharpen the toughest of knives. This hand held sharpener works on wavy and serrated knives too.
  • TOUCH UP YOUR KNIFE BLADES QUICKLY AND EASILY IN ONE PORTABLE TOOL, the Edgemaker Pro hones and sharpens blades in less than one minute, performs like Butcher’s Steel leaving behind a smooth strong blade. Bring your dull blades back to life!.
  • HOW THEY WORK- All Edgemaker Tools work the same way. Simply draw the knife through the crossed steels with mild pressure. Read all Safety information before use.
  • SAFE, DURABLE & LONG LASTING- including an unbreakable high impact plastic handle. Steels can be pulled out and rotated to provide new sharpening surface for years of use. Simply place sharpener in hot water for one minute to expand plastic, pull steels, rotate, and then reinsert.
  • SAFETY FIRST- read all directions on the back of the packaging, including best practices, and step by step instructions on how to get the best results.
Check Stock

Norton Grinding Wheel, Premium Bench and Pedestal Aluminum Oxide Bench Grinder Wheel, Very Fine Grit 6 Inch Grinding Wheel, Pack of 1

  • Norton Premium Bench and Pedestal Grinder Wheels are designed with quality, white aluminum oxide for deburring and tool sharpening.
  • This bench grinder is a good choice for deburring and tool sharpening on bench and pedestal grinders with operating speeds up to 4140 RPM.
  • This bench and pedestal wheel is specially designed for soft carbon steels, tool steels and super alloys.
  • Sized as a 6 inch grinder wheel with a vitrified bond, this grinding wheel is designed to hold a superb shape and resistance to wear.
  • Wheel Type is 01 with a 6 inch diameter and Very Fine Grit. Dimensions: 6 x 3/4 x 1 Inches with 3/4 inch thickness. Comes as a pack of 1 grinding wheels.
Check Stock

Starrett Air-Hardened A2 Tool Steel Flat Stock, Precision Ground, Standard Tolerance, ASTM A681, 1 1/2\ Width, 1/8\ Thick, 18\ Length

  • Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
  • This steel can be carburized or case hardened After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
  • The Starrett Company uses its own ground flat stock for many of its precision tool parts.
  • Full-length identification eliminates confusion with other steels.
  • Starrett A2 Tool Steel precision ground flat stock is a 20 carbon fine-grained, killed steel, which can be carburized or case hardened very similar to AISI 1018.
Check Stock

BucknBear Custom Handmade 1095 Damascus Fixed Blade Letter Opener File Work on Spine

  • An exquisite letter opener for the collector. The high performance Leopard Damascus steel is forged from 1095 15n20 Damascus with HRC of 58-60.
  • This extremely hard material is hand forged with tool steels and ball bearing steels to form 300 layers, which, through a special etching procedure....
  • The dynamic recurved tanto style blade and the decorative file work on the back side mark the high standard of this extraordinary letter opener..
Check Stock

Ultra Sharp XL Double-Sided Diamond Sharpening Stone | Coarse 400 and Extra Fine 1000 Grit Diamond Sharpener | 8 x 2.5 in.| Durable Non-Slip Base

  • High Quality Monocrystalline Diamonds - Diamonds are electroplated onto a solid steel plate. This process ensures the stones stay flat and never need to be lapped like other stones. No adhesives or plastic parts are used resulting in greater durability..
  • Sharpens Faster - The 400# grit side removes metal very quickly while the 1000# grit produces a razor sharp edge. The large 8" x 2.5" size sharpens even the biggest chef’s knife with ease. The user only needs to apply light pressure and let the diamonds do the work..
  • Sharpens Any Steel – Sharpens high carbon steels, hardened stainless steel, all tool steels, and even the new super steels. It also sharpens ceramic kitchen knives with no problem..
  • Unique Diamond Pattern - Eliminates the tendency to clog and keeps the sharpening surface clean and clear of metal shavings..
  • Adjustable Stone Holder - Keeps the stone firmly in place while sharpening and provides the knuckle clearance needed to hold a consistent angle..
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

HINMAY Scissor Tongs 10-Inch and 13-Inch Set Heavy Duty Stainless Steel Wire Tongs, Set of 2

  • ★【PROFESSIONAL CHEF QUALITY TOUGH STAINLESS STEEL】HINMAY Scissor Tongs are manufactured from premium 18/8(304) Austenitic Stainless Steel. Austenitic steels are non-magnetic stainless steels that contain high levels of chromium and nickel and low levels of carbon. Known for their formability and resistance to corrosion, Lead and Cadmium free. They will not be polluted or eroded and take heat resistance 1112°F / 600°C..
  • ★【STRONGER STAINLESS STEEL BODY AND RIVET】The body and rivet are crafted from the extra-thick 5mm stainless steel for unbeatable strength and durability while remaining lightweight and easy to handle. They are much sturdier than other scissor tongs..
  • ★【MULTIPLE APPLICATIONS】The tong gripper has an imprint on metal to prevent food slippage, great for grilling in the kitchen or outdoor barbecue and all kinds of parties. It is truly a multipurpose tool. 10-Inch and 13-Inch length is fit almost for everything you need in daily use..
  • ★【PACKAGE CONTENT】Each set comes equipped with 2 different sized tongs, 10-Inch and 13-Inch.
  • ★【CUSTOMER SATISFACTION IS OUR #1 PRIORITY】When you purchase these specialty scissor wire tongs Tool, you're offered a 100% CUSTOMER SATISFACTION SERVICE. Just contact us through your order i....
Check Stock

ACCUCUT I2DMS 2 Flute 3/8 Carbide End Mill Multi-Function for Deburring Spotting Chamfering & Side Milling 90 Degree bits AlTiN Coating

  • General Usage: Applicable with copper, copper alloys, alumiumn and alumiumn alloy, woodworking, cast iron, steels, carbon steels, alloy steels and stainless steel materials. Best use for materials HRC less than 40..
  • Solide Carbide: The material is European origin ultra fine grain carbide. The carbide rod we choose is made with the finest tungsten carbide powder and cobalt, using the best ratio to achieve the most ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible..
  • AlTiN Coating: It is a strong coating that's coated at temperatures between 450°C to 475°C. It is able to provide high wear resistance, lubricity, exceptional oxidation resistance, extreme hardness, and excellent abrasive wear resistance. It has higher reliability in dry operations, heat resistance, hard machining, and the resistance can be reduced..
  • Versatile Design: This end mill is designed for multiple purposes, such as chamfering, spotting, deburring and side milling. The chamfer degree is 45 per side..
  • 35° Helix: 2 flute and 35 degree helix design is ideal for roughing application because of its gr....
Check Stock

Cobra Carbide 46746 Solid Carbide Grooving Insert, CM14 Grade, Notched Style, 0.094\ Groove Depth (Pack of 10)

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
  • Multi Layer coating TiN/TiC/TiCN/TiN for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Provides longer tool life than uncoated grades.
Check Stock