Reviews Titanium Coated Taps
MIBRO 301360BLUE Tap Die and Drill SAE Set 26 Pieces
- Titanium coated for sharper, more precise cuts.
- Made to exact specifications from long lasting tool steel.
- Sets include prcise drills to match the taps.
- Includes: 6-32 NC, 8-32 NC, 10-24 NC, 1/4 inch-20 NC, 5/16 inch-18 NC, 3/8 inch-16 NC, 7/16 inch-14 NC, 10-32 NF.
- Also includes adjustable tap wrench and hex die holder.
Check StockCAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8
- Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
- ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
- ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
- ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
- ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Check Stock6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS
- Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
- Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
- Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
- Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
- Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stockuxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs
- PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
- DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
- HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
- MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
- HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..
Check Stockuxcell Straight Flute Taps M8 x 1.25 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool
- Straight Flute Taps: Thread size: M8 x 1.25.
- cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
- Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check Stockuxcell Straight Flute Taps M12 x 1.5 Metric Left Hand Titanium Coated M35 Cobalt High Speed Steel Machine Tapping Screw Thread Milling Tap Machinist Repair Threading Tool
- Straight Flute Taps: Thread size: M12 x 1.5.
- cutting direction: left hand (reverse). Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
- Wide Applications: Suitable for processing through holes. Used for drilling and tapping stainless steel, aluminum, die steel, bronze, hard plastics, etc.. Recommended feed rate: general steel: 6-15m/min.
- Titanium Coating: Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction. M35 Cobalt high speed steel tool features high hardness (HRC65-66), high red hardness, high wear resistance, good toughness..
- Easy to Use: The thread tap is used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
- Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drill use is easy to cause breakage to the tap, so it is not recommended. Prone to chipping or breaking due to speed overload or non-vertical tapping..
Check StockWolfride 9pcs Titanium Spiral Flute Tap Set Metric Machine Tap Set M2 M2.5 M3 M4 M5 M6 M8 M10 M12
- Made from HSS6542, coated with titanium, high hardness and rust resistance, long service life..
- Tap Size: M2*0.4, M2.5*0.45, M3*0.5, M4*0.7, M5*0.8, M6*1, M8*1.25, M10*1.5, M12*1.75..
- Spiral flutes, good chip removal effect, can tap to the bottom of the blind hole. M2-M6 pointed head, M8-M12 flat head..
- Can be used for processing iron, aluminum and other materials. Like stainless steel, cast iron and other difficult to machine materials, please choose cobalt taps..
- Used on drilling machines, tapping machines, CNC and milling machines, not for hand electric drill..
Check StockJ&R Quality Tools 40-Piece Titanium Coated Tap & Hexagon Die Set - Metric
- Includes both fine and coarse threaded taps and die in Metric sizing..
- Complete with compact custom fit latched ABS storage and carry case to protect and organize..
- M3 to M12 taps and hexagon die with thread pitch from 0.5mm to 1.75mm.
- Professional grade set of Titanium over alloy steel for superior cutting power without brittleness..
- Adjustable and T-Handle tap wrenches, adjustable die wrench, screwdriver, thread pitch gauge..
Check StockSINGER 04809 Titanium Universal Ball Point Machine Needles for Knit Fabric, Assorted Sizes, 5-Count
- Each package contains 5 individual Ball Point Titanium-coated Needles that can be used for all weights of knit fabrics.
- Needle sizes include: 2 Titanium Machine Needles in size 80/11, 2 Titanium Machine Needle in size 90/14 and 1 Titanium Machine Needle in size 100/16..
- Singer Ball Point titanium coated machine needles are super strong.
- 4 times longer lasting than regular sewing machine needles.
- Titanium-coated needles help to minimize thread breakage by reflecting heat away from thread, even at high speeds.
- Knit Fabric Titanium Machine Needles are universally designed to fit most sewing machine brands, including Singer, Brother, Kenmore and other quality sewing machines.
Check StockMuzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit
- ... 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
- Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
- Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
- BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
- Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
- EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
- Each compartment is labeled with sizing for simple identification.
- PACKAGE CONTENTS: Combination set contains both metric taps and dies.
- Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
- (Thread pitch gauge not included, but we recommend using these taps to light up thre....
Check Stock