Reviews Titanium Coated Drill Bit Extension

Neiko 10193A Titanium Step Bits Unibit Set 28 Sizes High Speed Steel Standard SAE Step Drill Bit Set Step Bits for Metal Unibit Step Drill Bits Industrial Unibit

  • REPLACES 28 DRILL BITS: This set includes three standard SAE step drill bits that replace 28 individual drill bits allowing for you to spend more time working, than swapping out drill bits..
  • TITANIUM COATED HSS UNIBIT: Made of high-speed steel with titanium coating for added durability and bit life. Suitable to drill though plastic, aluminum, copper, stainless steel, and many other types of sheet metal..
  • SMOOTH DRILLING ACTION: Two-flute spiral design provides faster, smoother cutting without walking and a tri-flat shank to ensure a firm grip. Our titanium 2 step bits for metal are perfect for all your DIY, general building, and engineering tasks..
  • COMPLETE STEP DRILL BIT SET: Comes with one 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit.
  • STEP BIT SET CUTS AND DEBURRS: Cuts through steel, sheet metal and other surfaces with only a small amount of pressure and deburrs as you drill. Our unibit step drill bit is compatible with most drills on the market..
Check Stock

IRWIN Drill Bit Set, Titanium Nitride Coated, 29-Piece (3018003)

  • Titanium Nitride Coated-coated nitride drill bits last longer and feature a cutting edge that stays sharp.
  • 135° split-point tip starts drilling immediately and helps eliminate walking.
  • IRWIN drill bits are great for repetitive metal drilling with portable drills and for use in stationary drill presses.
  • Includes 1/16" through 1/2" drill bit sizes in 1/64" increments.
  • Titanium Nitride drill bits last longer and feature a cutting edge that stays sharp.
Check Stock

ATE PROFESSIONAL SOLID COBALT HEX SHANK QUICK CHANGE DRILL BIT SET 32073 13pc

  • HSS Titanium Coating - Jefe Hex Titanium (TIN) coated Drill Bit can offer 3 times longer life than drill bits without coating..
  • Hex Shank - 1/4 inch Hex shank can be fit in quick-change chuck easily. And it can transit high torque from power tools to the working part of drill bit. Hex shank also eliminates the frustration of shank spinning in chuck. There is an ENHANCED TAPERED WEB in the drill bit that greatly increases the drill bit's strength and reduces premature breakage..
  • Accuracy - 135° split point geometry ensures accurate start and reduces walking on the working surface. Solid bonding technology eliminates radial runout and improves concentricity. High torque, Impact-rated..
  • Multi-Function - Jefe Hex drill bits are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Ideal for use in steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
  • Package & Size - 13 Pieces drill bits in a double blister pack with easy opening design. 135° Split- point, hex shank drill bits..
Check Stock

SEDY Drill Bit Set 246-Pieces Drill Bits and Driver Set for Wood Metal Cement Drilling and Screw Driving Full Combo Kit Assorted in Plastic Carrying Case | Outer Carton Reinforced Packaging

  • ...ner. At the same time, it is also a great gift-giving option..
  • ▲ALL-IN-ONE full set includes 87 X HSS black finish & titanium coated twist drill bits, 21 X masonry drill bits, 21 X wood drill bits, 6 X nut driver, 66 X 1" screwdriver bit, 30 X 2" screwdriver bit, 4 X hole saws, 1 X arbor adaptor, 1 X spade bit extension, 4 X drill stoppers, 2 X hex keys, 1 X nail punch, 1 X magnetic holder, 1 X counter sink. With sponge cushion between the upper and lower halves to protect bits falling off and mixed after repeated use..
  • ▲According to the feedback, the packaging was upgraded, and there were reinforced thick cartons outside the toolbox to avoid damage to the products during transportation and delivery. It is also more convenient to protect products and store after use..
  • ▲WORRY-FREE WARRANTY - Backed by SEDY 30-Days Money-back Satisfaction Guarantee & Manufacture's 1-Year Warranty..
Check Stock

CRAFTSMAN Drill Bit Set/Screwdriver Set Titanium Nitride Coated 21pc CMAM3211

  • COMPATIBILITY: 1/4-inch Hex Shank Drill Bits for Wood, Metal or Plastic are compatible with Impact Drivers, CRAFTSMAN 3-inch Locking Magnetic Bit....
  • CORROSION RESISTANT: Titanium Nitride Coated coated drill bits promote longer life.
  • PRECISE HOLE PLACEMENT: Split Point of the drill bit set provides precise hole placement and clean, burr-free holes.
  • SHOCK-RESISTANT: Screwdriving Bits constructed with shock-resistant tool steel for maximum durability.
Check Stock

Hex Shank Drill Screw Cone, 42mm Ti Plating Split Tool Twist Firewood Splitter, Tree Stump Breaker Wood Cone Punch Drill Bit

  • [Special Tool] Wood splitting drills are often used to install on electric wood splitting tools for quick and effective wood splitting..
  • [Tough Material] Drill Bit was made of highspeed steel with higher strength after the high temperature quenching, providing better efficiency during high pressure works..
  • [Titanium coated] The surface of the drill bit is plated with titanium to improve the strength and increase the service life by protecting the inner drill from exposing to outside environments..
  • [Special Designed Bit] The drill bit has a incisive and tapered thread head which helps to separate the firewood accurately and effortlessly..
  • [Hex Shank] The wood cone punch comes with a long hex shank, which can be firmly installed on the drilling tool and not easy to fall off..
Check Stock

Cobalt Drill Bit Set - 13 Piece M35 Cobalt Drill Bits with Storage Case - Perfect Drill Bits for Metal, Hardened & Stainless Steel, Cast Iron, and More!

  • REPLACES 28 DRILL BITS: This set includes three standard SAE step drill bits that replace 28 individual drill bits.
  • TITANIUM COATED STRENGTH: Made of high speed steel with titanium coating for added durability and bit life.
  • SMOOTH DRILLING ACTION: Two-flute design provides faster, smoother cutting without walking and a tri-flat shank ensure a firm grip.
  • A COMPLETE SAE SET: Comes with one 3/16-inch to 1/2-inch six-step bit, 1/4-inch to 3/4-inch nine-step bit, and 1/8-inch to 1/2-inch 13-step bit.
  • CUTS AND DEBURRS: Cuts through steel, sheet metal and other surfaces with only a small amount of pressure and deburrs as you drill.
Check Stock

wesleydrill Mini Drill Bit Set 60 Pcs 3/64\-1/8\ Tiny Micro Twist Drill Bits Fit for Home DIY and General Building/Engineering

  • [Specifications and packaging]: 60pcs small drill bit set: Include size: 3/64 inchx10pcs drill bit ,3/32 inchx10pcs drill bit,1/16 inchx10pcs drill bit,5/64 inchx10pcs drill bit,7/64 inchx10pcs drill bit,1/8 inchx10pcs drill bit..
  • [Fitment]: Small titanium drill bit set ideal for DIY, home and general building/engineering using. Not for masonry and concrete drilling..
  • [Material]: Twist drill bit set industry grade high speed steel with titanium coating,high hardness,good wear resistance and durability..
  • [Advantage]: Tiny drill bits 135°precise point with sharpened edge promises cutting speed..
  • [Special coating]: HSS drill bit set titanium coating increases the ware-resistance and durability of the drill bit, effect long life drilling..
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

HSS Titanium-Coated Spiral Groove Step Drill 4-Piece Set with Automatic Center Punch, 1/4\ Hexagon Shank Drill bit, for Plastic, Wood, Metal, Multi-Hole Taper Drill bit Set

  • [Quality Material:] HSS 4241 & classic high speed steel with titanium coating for strength and longevity. Coated by titanium,this step drill set performs well in heat,corrosion and rust resistance..
  • [Package ] 4-Piece HSS Groove Step Drill Bit (4-12/ 4-20/ 4-32mm ) + 1 Automatic Center Punch..
  • [Wide Application] Perfect for home repairs and light jobs such as drilling holes in plastic, aluminum, copper, iron sheet and many other types of sheet metal (excluding steel or any other harder metal..
  • [Easy Drilling] Two-fluted design provides faster, smoother cutting, provided with small pressure and the sets. Stepped grooves prevent slippage in the chuck..
  • [ Various Specifications]The titanium coated step drill bit set has 28 different apertures. They can process different kinds of diameter holes, which greatly saves you a lot of trouble..
Check Stock