Reviews Thread Plug Gauge

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock

DAYUAN Professional Petrol Engine Compression Tester Kit Set for Automotives and Motorcycles

  • Adapters for a wide number of vehicles (spark plug types/depths).
  • Includes 2 rubber cones ends for quick check (no need to thread into head).
  • 3" Gauge has dual color scale with 0-300 PSI, 0-20 kPa.
  • Fittings: M10, M12, M14, M18 (Male, With "O" Ring).
  • Includes 14mm and 18mm spark plug adapters.
Check Stock

Owfeel M18x1.5 DIN Valve Scuba Adapter with Gauge, Pcp Scuba Tank Valve 4500psi Working Pressure with 22-inch-Long Black Hose for Air Tank, PCP Air Rifle, Paintball, and HPA Tank (M18x1.5 Threads)

  • High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure..
  • Two Types of Threads - One-piece DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us..
  • Dual Gauge Design - one gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose..
  • Easy Installation and Quick Release - It comes with an 8mm female quick-release coupling plug, and it could be connected and released from other male fittings within seconds..
  • Strong Compatibility - Mainly used for high-pressure gas cylinders, SCBA gas cylinders, SCUBA diving cylinders or PCP gas cylinders, easy to assemble and install, for air/carbon dioxide filling..
Check Stock

PneumaticPlus SAR600-N06BG Compressed HIGH FLOW Air Pressure Regulator 3/4\ NPT - Bracket, Gauge

  • 3/8" NPT Air Regulator w/Gauge, Precisely adjust the air pressure and keep it constant.
  • Flow Rate: 88 SCFM (2500 L /Minute)@ 90 PSI.
  • Locking Regulator Knob, 0-150 psi Gauge, Metal Bracket, a pair of Air Coupler＆ Plug Kit, 2 x3/8" NPT Fittings, 1 x Thread Seal Tape.
Check Stock

48 Pc Thread Measuring Wire Set 16 Different Diameter Sizes Pin Set

  • Material: the screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long lasting durability.
  • Package content: the screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • Thread pitch gauge function: can be applied to measure the pitch of the thread.
  • Center gauge function: apply to grind and position thread cutting tool on a lathe.
  • Advantage: accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock

PiercingJ 36pcs Candy Colors Spots Acrylic Ear Stretching Plugs Kit and Double-flared Thin Silicone Saddle Tunnels Set

  • You will receive 6 pairs of plug with O rings + 6 pairs of screw tunnels + 6 pairs of ultra thin flesh tunnels – 18 pairs in total. Gauge:0g=8mm..
  • How to Clean: Clean them with water and let them dry naturally, or clean with medical alcohol ( swipe them with....
  • How to Screw: Please observe the thread first and ensure to match the right spot. Without matching the thread, it would be hard to screw on. If any....
  • Ultra Thin Flesh Tunnels: material: Thin Silicone.
  • Very smooth surface and comfortable touch.Soft and flexible, easy and comfortable to put on & off..
Check Stock

5 Pcs Thread Pitch Gauges Measure Tool Set,Stainless Steel Thread Gauges 3 Pcs 55 & 60 Degree Metric System Centre Gage + 51Pcs America SAE Type + 52 Pcs Metric & America SAE Type & British Whitworth

  • 【Clear Marking】 : There is a small hole at both ends, which is convenient for adjustment and disassembly with screws. You can easily rotate the thread pitch gauge blade where you press the tooth thread gauge. The numbers are clearly marked and easy to read..
  • 【Material】 : Screw gauge tool set is made of stainless steel and processed with chrome finish. Surface polished smooth, applying anti-rust oil to prevent rust.good resilience, elegant appearance..
  • 【Measuring Range】: 51 pcs America SAE type measuring range is 4-84.
  • 52 pcs Metric & America SAE Type & British Whitworth Metric is 0.25-6.0mm, Imperial is 4G-62G US: 8, 10, 11, 14, 19, 28..
  • 【Suitable Scenarioos】 : Thread pitch gauges set usually used to check whether the size of the mold, machine and mechanical thread is correct.
  • use thread gauges blades of different sizes to accurately measure internal and external threads.
  • center gauge is used to grind and position thread cutting tools on a lathe..
  • 【What You Get】: 1 x American SAE type pitch gauge 60°, 1 xBritish Whitworth metric system pitch gauge 55°, 2 x center gauge 60°, 1 x center gauge 55°..
Check Stock

220V Self Priming Water Pump Pressure Switch Automatic Pressure Controller Black

  • What you will get: you will receive 1 piece of 2 inch, 1/4 inch NPT water pump pressure gauge, 1 piece of 1/4 inch NPT female thread 1/2 inch male threaded brass fitting and 1 piece of tape, a total of 3 accessories for swimming pool pressure gauges, they are indispensable accessories for swimming pools and other equipment.
  • Clear and accurate reading: this water pump pressure gauge has a clear surface and accurate reading, it can provide accurate readings in the range of 1 to 100 psi and 0 to 7 bar for pumps, it is equipped with a 2 inch dial, is a practical tool for detecting water pressure.
  • Reliable material: this pump pressure gauge and 1/4 inch NPT internal thread x 1/2 inch external thread joint are made of brass, not easy to wear, comfortable texture, durable, the surface of this gauge is made of plastic which allows you to see clearly to the reading and pressure range, and use the tape when installing the pressure gauge to prevent leakage.
  • Brass fitting size: NPT thread size is the correct size and does not represent the actual diameter, 1/4 inch NPT internal thread x 1/2 inch external thread brass fitting can be applied to connect the pressure gauge, it is ideal to use the tape to make installation more stable.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

Center Gage Thread Gauge Whitworth 55 & 60 Degree Inch Metric Screw Thread Pitch Gauge 3pcs

  • 【Material】The screw gauge tool set is made of stainless steel and processed with chrome finish, it combines high strength with good resilience and elegant appearance.
  • It won't get rusted easily and owns long-lasting durability.
  • 【Package content】The screw gauge tool set contains 3 x screw pitch gauge and 3 x center gauge.
  • 【Thread pitch gauge function】Can be applied to measure the pitch of the thread.
  • 【Center gauge function】Apply to grind and position thread cutting tool on a lathe.
  • 【Advantage】Accurately measures internal and external screw threads with thread blades of varied size, they worked well to measure both screws and figure out what type of replacements.
Check Stock