Reviews Thread Insert

80Pcs M8x1.25 Threaded Inserts Stainless Steel Spiral Helical Thread Insertion Kit

  • GOOD CONNECTION PERFORMANCE: Steel thread inserts used in low-strength materials such as aluminum and magnesium can avoid thread damage and obtain good connection performance, thereby improving connection strength and improving connection conditions..
  • WEAR RESISTANCE: Used for parts that need to be disassembled frequently, which can greatly improve the service life and wear resistance of the thread..
  • ELASTICITY: Due to a certain elasticity, the thread insert can make the load distribution on each thread uniform, eliminate the pitch and tooth deviation between the screw and the screw hole, and absorb vibration, thereby improving the thread connection strength and fatigue resistance strength..
  • PREVENT LOOSENING: Wire sleeve thread repair insert can prevent loosening of screws, especially for products requiring high safety factor..
  • EASY TO MAINTAIN: Insert the thread into a damaged screw hole, and then use the screw hole normally to avoid the loss of the workpiece..
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock

20Pcs Self Tapping Thread Inserts M2-M16 Carbon Steel Thread Repair Inserts 302 Type Combination Kit Set Replacement for Thread Repair Furniture (#1)

  • [Material] The self tapping thread insert is made of high quality carbon steel, which has high hardness and low abrasion..
  • [Prevent Loose] The insert has unique self-tapping designed external thread with good tensile resistance, which can effectively prevent stripped due to torsion or vibration..
  • [Application] The thread insert is mainly used for furniture repair, it also can be used in the automotive industry, rail vehicle industry, household appliance and other industries..
  • [Good Performance] These inserts can prevent screw from getting loose, especially used for products requiring high coefficient of insurance, no burr in thread, clear and tidy..
  • [Easy Maintenance] Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Check Stock

20Pcs Self Tapping Thread Inserts M2-M16 Carbon Steel Thread Repair Inserts 302 Type Combination Kit Set Replacement for Thread Repair Furniture (#2)

  • [Material] The self tapping thread insert is made of high quality carbon steel, which has high hardness and low abrasion..
  • [Prevent Loose] The insert has unique self-tapping designed external thread with good tensile resistance, which can effectively prevent stripped due to torsion or vibration..
  • [Application] The thread insert is mainly used for furniture repair, it also can be used in the automotive industry, rail vehicle industry, household appliance and other industries..
  • [Good Performance] These inserts can prevent screw from getting loose, especially used for products requiring high coefficient of insurance, no burr in thread, clear and tidy..
  • [Easy Maintenance] Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Check Stock

X-DREE 304 Stainless Steel Self Tapping Threaded Inserts Silver Tone 10 Pcs(Insertos roscados autorroscantes de acero inoxidable 304, tono plateado, 10 piezas

  • Self-tapping Design: Due to self-tapping ability, the base material does not have to be tapped in advance..
  • Multi-size to Choose: This thread insert tools with 7 size to choose, M3 M4 M5 M6 M8 M10 M12, meeting your different needs..
  • Advantage: This carbon steel slotted thread insert has a large contact area with the finished product, strong pull resistance, and the base material also has good air tightness..
  • Function: This self tapping thread insert has strong resistance to vibration, which can prevent loosening, can also increase the thread strength for new products..
  • Easy to Install: This self tapping insert is simple and quick to install - only need one assembly tool..
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

Reducer Nut, Industrial Accessory Threaded Bushing Screw Hole Repair Thread Protection Tool for Industrial Supplies

  • The thread repair socket is made of stainless steel, which has high strength and is not easily deformed during the thread repair process..
  • The wire thread insert set is fitted in the screw hole of the metal workpiece to form a high‑strength and high‑accuracy standard female thread..
  • This socket is a cost‑effective repair tool when threading errors or repairing damaged female thread holes..
  • Maintenance nuts are mainly used in aviation, automobiles, lamps, molds, mechanical equipment and other manufacturing fields..
  • The wire thread insert can be used to switch between metric and inch threaded holes, which is convenient and quick..
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (10 pcs)

  • The hand screw tap used to make new M6 threads or re-thread damaged and/or jammed threads..
  • Wire thread insert tool is a tool specially used when installing (or removing) wire thread inserts..
  • The set also includes 6pcs M6*1*1.5D and 6pcs M6*1*2D threaded insert screw made of 304 stainless steel for use..
  • They are widely widely used in the automobile industry,rail car industry,shipbuilding industry,household appliances,construction machinery,electronic products,engineering plastics,modular furniture and other industries..
  • It is cheap and can satisfies your practice of tapping,screw insert installation and removal.For a beginner,they are a good combination..
Check Stock

Lisle 65200 Pro 14mm Plug Hole Repair Kit

  • Installs a new solid steel spark plug thread insert in original thread location..
  • Set includes one-piece drill tap, long tap holder, short tap holder, insert installer, swedger and handle..
  • Includes four insert sizes: 5-16", 7/16", 11/16" and 1" (new size)..
Check Stock

E-Z LOK Coil Threaded Insert For Metal 18-8 Stainless Steel Helical Wire Thread Insert 8-32 Internal Threads, 0.328\ Length, Pack Of 10

  • THREADED INSERT FOR METAL – E-Z LOK Coil Thread Inserts for metal. Also known as wire thread inserts or helical threaded inserts..
  • QUICKLY REPAIR DAMAGED THREADS – Quickly repair damaged threads or reinforce tapped holes in soft metals with this steel thread insert..
  • 18-8 STAINLESS STEEL WIRE – 18-8 stainless steel threaded inserts that are resistant to corrosion and can withstand temperatures to 800°F..
  • FOR USE WITH APPLICATIONS – The 8-32 threaded insert is designed for use with soft metals: aluminum, cast iron, magnesium, etc..
  • STRONG THREADS MADE EASY – Before installation, the metal threaded insert diameter is larger than the hole and then reduced during installation..
Check Stock