Reviews Temperature Probe Tester

SeedRanch Falcon IV Turf Type Tall Fescue Grass Seeds - 50 lbs.

Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
General uses includes growing tent and reservoir.
Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
Lab quality glass pH probe with easy two point calibration.
Conductivity / temperature probe comes factory calibrated so it's ready to be used.
Double junction probe is more accurate than test strips and drops.
Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
Other features: International power supply, water resistant design.
KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
2-Year Limited Warranty with proof of purch....

Check Stock

Xinler Accuracy Jewelry-Diamond Tester Pen Professional Jewelry Diamond Tester Tool

Before Test: 1. Put the battery in the tester. 2. Take off the probe cap. 3. Turn on the switch. 4. Make sure only one light light up on the scale. 5. Make sure the " ready lamp" light on. 6. (If test diamond, you then need to turn on the lights number corresponding to the indoor temperature and diamond weight.). 7. (If test other gems, you'd better calibrate the probe, method: by placing the probe vertically on a glass, then adjusting the light to 5, then test the gems.).
★ NOTICE: * No matter what gemstone you are testing, the probe needle and the tested object must be at a 90° angle. * When testing diamond, your right index finger must keep touching the metal panel on the back of the tester, while you do not touch the panel if you test other gemstones. * Do Not test any metal. * Do Not wear glove..
Product size: 16 * 4 * 2.2 cm. weight: 100g. Power needed: 1x 9V battery (not included). If you have any problem about the testing, please contact us, we would love to help..

Check Stock

Klein Tools CL320KIT HVAC Kit for HVAC Testing; Digital Clamp Meter, Non-Contact Voltage Tester, and Infrared/Probe Thermometer

HVAC Kit with testers for the HVAC Professiol: HVAC Digital Clamp Meter, Dual IR/Probe Thermometer, and Dual Range Non-Contact Voltage Tester with Flashlight.
Cat. No. CL320 HVAC Clamp Meter with TRMS technology measures AC current, NCVT, AC/DC voltage, resistance, frequency, DC microamps, capacitance, duty cycle, diode test, continuity, and temperature.
Cat. No. IR07 Dual IR Probe and Thermometer measures temperature from -40 to 572 Degrees Fahrenheit (-40 to 300 Degrees Celsius).
measure surface temperature with Infrared Thermometer (DS ratio 8:1).
Measure air vents and duct temperature using temperature probe with hands-free hanging hook.
calculate differential temperature (T1-T2) for both IR and probe temperatures.
Cat. No. NCVT3P is dual-range and detects from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.

Check Stock

Sper Scientific 860040 Turbidity Meter

... reading function helps lock reading even if the tester is taken out of the sample!.
✅Automatic Calibration - The digital ph meter for water uses a 3-point AUTOMATIC calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18 to ensure the accuracy of your measurements..
✅Automatic Temperature Compensation - No longer need to pay attention to the temperature of testing liquid, Allprettyall ph tester digital can accurately determine the pH value of the sample in the temperature range of 0 °C-60 °C (32 °F-140 °F), so as to solve the inaccurate problem caused by changing the liquid temperature..
✅Wide Application-Allprettyall water quality tester designed in pH and temperature can be measured simultaneously with high precision. Omni-directional measurement of water quality to ensure the health of water quality! The ph meter digital water tester is ideal for drinking water,daily household,hydroponics,sewage, lab teaching and ANY water sample..
✅Easy To Carry And 100% Quality Guarantee - Small pocket size and light weight design makes it more popular with users.
strong storage boxensures more easy carry! Cleaning cloth for cleaning after use,three extra batteries as spare. If our digital ph meter doesn’t meet your....

Check Stock

Power Probe ECT3000B ECT 3000 Box

【Overload Protection for Longer Life】Auto circuit breaker protect the tool from overload through the inner circuit breaker to enables product last....
【4 Adjustable Modes probe tester】AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test.
【Easy to Operate】Power probe built-in head light allow you to work in the dark area, there will be beep tone when detecting,operate the tool....
【WIDE Vehicles Application】 Power probe tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability....
【3-YEAR WARRANTY Circuit Tester】 For damages caused by non-human factors, AUTOOL promise to resend power probe circuit tester parts for free....

Check Stock

Circuit Breaker Finder Find Breakpoints, Automotive Circuit Tester with 75CM Test Lead, Electrical Wire Tracer Find Short Circuits, Circuit Tracer with Earphone & Handbag, Electrical Tester

【Short Circuit Following and Locating Test Light】The circuit tester is suitable for diagnostic in all 6V to 24V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses and circuits, which can help you reduce diagnostic time in automotive electrical systems. In most cases, short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping.This probe tester can assist you tracing problem wires and locating breaking points..
【Polarity Identification & Continuity Testing & Jumper Lead Operation】This power circuit probe tester can help you quickly identify positive and negative polarity of electric cables and plugs of vehicles. When the probe tip contact to the positive electrode, the RED light on. When the probe tip contact to the negative electrode, the GREEN light on. It can also test for continuity and do the jumper lead operation with the assistance of its auxiliary ground lead..
【Activate and Test Components In/Out of Vehicle’s Electrical System&Poor Ground Contact Testing】Power circuit probe tester could activate components in and out of the vehicle’s electrical system, test and check the components if defective or not, or if rating current of component is higher th....

Check Stock

PH Meter, TDS PPM Meter, Soild PH Tester[Upgraded Version], 3 in 1 for Home Water and Garden Soil Use

[Package]: - 1 PH Meter(yellow) +1 TDS & EC Meter (white)+1soil tester kit (green). Total is 3 PCS..
[Functions]: - The digital PH meter is equipped with Temperature detector and PH tester function. TDS meter can tester water purity level, which show on the screen in PPM (parts per million). The soil meter can test the pH,light, moisture of soil, to help grow your plant more easy..
[Quick and accurate]: - th ph and tds tester can test quickly and accurately within ±0.02. It only takes a few seconds to show accurate data on the screen..
[Easy to use]: - ph tester and tds meter have sensitive electrode sensor ,simply press "ON". It only takes a few seconds for your result to appear the data on screen. Soil test kit just need to insert the probes into the soil about 4-6 inches, and wait for about 10 mins to read the accurate data..
[Widely use]: - These meters are designed small and convenient. PH meter and can test pH balance,TDS meter can test water ppm ideal for testing drinking water, swimming pools, hydroponics, and more. Soil tester is applicable to plants, garden, lawn and farm.(Kindly note: Please clean and dry the probe with clean water after each use, as any water or matter left on the probe will affect the accuracy of the next test).

Check Stock

Bluelab METCOMPLUS Combo Meter PLUS for pH, Temperature, and Conductivity in Water and Soil with Easy Calibration, Digital Nutrient (TDS) Testing Kit for Hydroponic System and Indoor Plant Grow

Monitor 3 parameters in water and soil: Conductivity (TDS) level to ensure plants get the balanced feed, pH up and down, and temperature with lab quality glass probe.
Gereral uses include growing tent, swimming pool, drinking water, and aquarium.
This hydroponics meter has ATC that provides consistent reading regardless of any fluctuations in temperature.
Leap pH probe works in multiple growing environments.
Conductivity scales include EC, PPM, and CF.
Combine with Bluelab pen, tester, monitor and controllers for full indoor garden nutrients monitoring in water and soil.
pH probe requires easy two point calibration.
Conductivity / temperature probe are factory calibrated and ready for use.
Other features: Auto off function, low battery indicator, units for temperature.
KIT INCLUDES: AAA batteries, ph probe storage cap, and calibration solution, probe care kit is sold separately.
Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
5-Year Limited Warranty with proof of purchase (6-month warranty for probes).

Check Stock

Dupeakya Professional Diamond Selector II, Gem Tester Pen Portable Electronic Diamond Tester Tool for Jewelry Jade Ruby Stone (Diamond Tester 2)

...n is simple to operate to get results. 1. Put the battery in the tester. 2. Take off the probe cap. 3. Turn on the switch. 4. Make sure only one light lights up on the scale. 5. Make sure the " ready lamp" light is on. 6. (If test diamond, you then need to turn on the number of the light corresponding to the indoor temperature and diamond weight.)..
[TEST RESULT ANALYSIS ]: If lights 003e= 9 and have sounds, it is real diamond. If lights 003c 9 and no sounds, it is not diamond. If lights is 7 or 8, it is true crystal. If lights is 6 or 7, it is true jade. If lights is 4 or 5, it is glass.
[NOTICE]: * When testing, the probe needle and the tested object must be at a 90° angle. * When testing diamond, your right index finger must keep touching the metal panel on the back of the tester, while you do not touch the panel if you test other gemstones. * Do Not test any metal. * Don't wear gloves..
[PACKAGE CONTENTS ]: 1 x diamond tester, 1 x leather case, 1 x test platform, 1 x user manual. The power needed: 1x 9V battery (not included). If you have any questions about use, please feel free to contact us..

Check Stock

Bluelab MONGUACON Guardian Monitor Connect for pH, Temperature, and TDS in Water with Data Logging (Connect Stick not Included), Nutrient Meter for Hydroponic System and Indoor Plant Grow

Monitor pH up and down, temperature, nutrient (TDS) level in water to maximize your grow and ensure plants get a balanced feed.
General uses includes growing tent and reservoir.
Selectable conductivity units include TDS, EC, ppm 500, ppm 700 and CF.
This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
High and low alarm when outside parameters, data logging with Bluelab Connect software.
Lab quality glass pH probe with easy two pointcalibration.
Conductivity / temperature probe comes factory calibrated so it's ready to be used.
Double junction probe is more accurate than test strips and drops.
Combine with Bluelab pen and meter for full garden nutrients monitoring in soil.
Other features: International power supply, water resistant design.
KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit and connect stick sold separately.
Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).

Check Stock