Reviews Teeth Gears

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

Nitze 15mm Follow Focus Kit with 3 Reversible Drive Gears 3 Marking Disks Gear Ring Belt and Crank A/B Hard Stops and 360° Infinity Zoom Adjustable Dual Rod Cine Follow Focus - MF15D

  • 【Adjustable Rail】Nitze MF15D follow focus features an adjustable rail above the 15mm rod clamp. It can be adjusted within 50 mm to fit your desired lens by twisting the red thumbscrew at the bottom..
  • 【A/B Hard Stops】The follow focus system supports to preset A/B hard stops focal length or use 360° infinity zoom. Built-in threaded holes allow you to put A/B hard stops screws inside when not in use to prevent loss..
  • 【Reversible Drive Gears】The follow focus kit contains 1 x 0.8 Mod/38 Teeth, 1 x 0.8 Mod/43 Teeth, 1 x 0.8 Mod/65 Teeth drive gears. And the drive gear is reversible. It can be mounted on the front or back side of the follow focus to meet different focusing needs..
  • 【Three Marking Disks】The follow focus comes with three marking disks for interchangeble. Snap on magnetic marking disk can be easily attached or detached..
  • 【Crank & Gear Ring Belt】T006-03 crank is included for speedy and accurate focusing. The gear ring belt can be used when your lens is without 0.8 pitch gears..
Check Stock

uxcell 20pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor

  • Feature - 100% Brand new and .Good accessories for Vehicle or remote control,Provides a convenient choice for your DIY project.
  • Specification - Plastic Gears Model 082A, 8 Theeth, 0.5 Modulus, 5mm Outer diameter, 5mm Thickness, 2mm Hole Diameter.
  • Application - Plastic Crown Gears suit for a science DIY projects such as rc model car, model electric robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project..
  • More Choose - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs..
  • Package Content - 20pcs Plastic Gears 8 Teeth Model 082A Reduction Gear Plastic Worm Gears for RC Car Robot Motor.
Check Stock

uxcell 10pcs Plastic Gears 48 Teeth Model 48102B Reduction Gear Plastic Worm Gears for RC Car Robot Motor

  • Feature - 100% Brand new and .Good accessories for Vehicle or remote control,Provides a convenient choice for your DIY project.
  • Specification - Plastic Gears Model 48102B, 48 Theeth, 0.5 Modulus, 25mm Outer diameter, 5.8mm Thickness, 2mm Hole Diameter.
  • Application - Plastic Crown Gears suit for a science DIY projects such as rc model car, model electric robot and windmill, education such as displaying how gear ratios work, and any other family small motor DIY project..
  • More Choose - Our store have the most complete specs gears shown in the following description, which can meet your DIY needs..
  • Package Content - 10pcs Plastic Gears 48 Teeth Model 48102B Reduction Gear Plastic Worm Gears for RC Car Robot Motor.
Check Stock

weelye 550 Full Set of Motor Gear Box Large Gear Middle Gear Small Gear for Kids Ride On Car,Children's Toy Car 550 Gearbox Accessory Children Electric Ride on Toys Replacement Parts

  • Gears are used in Children's electric car 550 gearbox.
  • 550 Full Set of Large Gear Middle Gear Small Gear,Lubes must be applied before installation..
  • Large teeth: 37 teeth in the number of teeth, middle teeth: 10 teeth in the middle, 50 teeth in the outer ring, small teeth: 12 teeth in the middle, 64 teeth in the outer ring..
  • Please check the number of teeth carefully to ensure that the size and number of teeth of the gear you buy must be exactly the same as the original gear before it can be used.
Check Stock

Starter for Kohler 3209808S 3209808 3209804S 3209801S 3209803S 3209804 3209803

  • Part Number: 3209808S / 3209808 / 3209804S / 3209801S / 3209803S.
  • Specs: 12 Volt / CCW / 10 Teeth Drive. 10 and 9 teeth gears are interchangeable..
Check Stock

Lancer Tactical Gen 2 Airsoft M4 AEG Carbine 10\ (Tan - High Velocity)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES – Rear sling mount is perfect for single point slings.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

Lancer Tactical Gen 2 Airsoft M4 AEG Carbine 10' (Gray - High Velocity)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • RAIL SYSTEM FOR ATTACHMENTS – 7 lines of keymod on rail for customized placement of rail panels.
  • 2 removable 6-rib and 1 removable 10-rib rail sections for placement of accessories.
  • GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
  • crafted and polished 6.03mm tightbore barrel improves range and accuracy.
  • BATTERY – Simple battery (9.6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • FEATURES – Rear sling mount is perfect for single point slings.
  • retractable crane stock adjusts to meet the battle situation.
Check Stock

Extruder Wheel 3D Printer Parts Drive 40 Teeth Gear Brass Extruder Wheel Gear Compatible with CR-10 CR-10S S4 S5 Ender 3 Ender 3 Pro 10

  • Sufficient content: this package contains adequate quantity of extruder wheels in a pack, sufficient quantity to satisfy your various demands and....
  • Check the dimension: each 40 teeth gear measures approx. 11 x 11 mm/ 0.43 x 0.43 inch in length and width, its inner diameter is approx. 5 mm/ 0.2....
  • Practical function: our 3D printer parts can replace your broken one and make your printer work more efficiently, improve the performance and....
  • Good bearing capacity: these drive 40 teeth gears are made of quality brass, rustproof and no corrosion, durable and stable to use, with good bearing....
  • Wide compatibility: our brass extruder wheel gears are easy to install, compatible with CR-10, CR-10S, S4, S5, Ender 3, Ender 3 Pro and most 3D....
Check Stock