Reviews Mounting Gears

USA Standard Gear (ZIKGM8.6-S-30V2) Spider Gear Set for GM 8.6 Differential

  • For Standard open on a 2000-2006 GM8.6” Rear End. This spider gear set fits ’00-’06 V2 carriers ONLY, with carrier casting numbers 7875 or 1073. Measures 2.8 inch across between side gear mounting surfaces.
  • Includes Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust Washers.
Check Stock

TYT 3500lbs Boat Trailer Winch - Black (3500lb Cable Winch - Black)

  • ❆【Capacity】The Heavy duty steel construction hand winch has pulling force for 3500 lbs / 1600 kg, Steel Cable Length: 10m*(32ft) ø 6.0mm, Mounting base size: 7.55x3.93in, Winch Color: black.
  • ❆【Special Surface & Gear】High quality Zinc-Plated black plating finish boat trailer winch for maximum strength and longevity that resists rust and corrosion. Hardened steel gears, first speed ratio 4:1, second speed ratio 8:1, high-efficiency transmission ratio4:1/8:1. High carbon steel gears to resist wear and last longer..
  • ❆【Handle Performance】 25cm/9.84in, the curved handle of TYT Winches makes it easier to turn, to move something 3500 lbs or less, anti-slip handle ensures a tight grip for less user fatigue and more productivity while cranking the manual winch..
  • ❆【Two Way Ratchet】Mooring hook equipped with a safety pawl, which can ratchet forward and backward. The ratchet winch can be used to lift objects, drag boats, or volleyball net, Ideal for towing or loading boats, personal watercraft, and lawn equipment..
  • ❆【Package & Note】Standard mounting hole, small portable size, easy to install. The inner box package pass the 1-Meter rejection test, protect the product from damage..
Check Stock

TYT 3500lbs Boat Trailer Winch - Black (3500lb with Red Strap Winch - Black)

  • ❆【Capacity】The Heavy duty steel construction hand winch has pulling force for 3500 lbs / 1600 kg, Strap Length: 10m(32ft) ø 50mm, Strap Color : Red, Mounting base size: 7.55in x 3.93in, Winch Color: black.
  • ❆【Special Surface & Gear】High quality Zinc-Plated black plating finish boat trailer winch for maximum strength and longevity that resists rust and corrosion. Hardened steel gears, first speed ratio 4:1, second speed ratio 8:1, high-efficiency transmission ratio 4:1/8:1. High carbon steel gears to resist wear and last longer..
  • ❆【Handle Performance】 25cm/9.84in, the curved handle of TYT Winches makes it easier to turn, to move something 3500 lbs or less, anti-slip handle ensures a tight grip for less user fatigue and more productivity while cranking the manual winch..
  • ❆【Two Way Ratchet】Mooring hook equipped with a safety pawl, which can ratchet forward and backward. The ratchet winch can be used to lift objects, drag boats, or volleyball net, Ideal for towing or loading boats, personal watercraft, and lawn equipment..
  • ❆【Package & Note】Standard mounting hole, small portable size, easy to install. The inner box package pass the 1-Meter rejection test, protect the product from damage..
Check Stock

NEXTIME Wall Clock – Ø 90,5cm - Metal - Silver - 'Wire Gear Clock', Medium (Fit 94ft Height), (3260ZI)

  • The NeXtime "Roman Gear Clock XXL" oversized (90.5cm) black metal gear clock with classic roman numbers brings an industrial style into your home.
  • The stunning silver coloured real moving gears matches perfectly with the silver coloured romantic style hands.This open-faced design is a perfect addition to your room.
  • .The moving gears are separately controlled from the clock and can be easily switched off.
  • This large clock runs on 3x AA battery (not included)..
Check Stock

CINOTON 360 Degree Microwave Motion Sensor 3 IP65 Rating Waterproof Motion Sensor Light Switch (No Control)

  • Tips - No any set up switches, Remote controller Not Included, sold separately. (ASIN:B08XYLM2W3.
  • B08CZNHHXY) Please feel free to contact us for any problem..
  • Automatic Dimming - when used in combination with 1-10V dimmable control gears..
  • Built-in adjustable daylight sensor - 1-10V interface can match up with stand-alone daylight sensor MC054V and achieve daylight harvesting..
  • Wide detection area and angle - up to 8m in diameter, the higher mounting height 15m Max ,motion can be detected through plastic, glass, and thin non-metal materials. 360 degree when ceiling mounting ,180 degree when wall mounting..
  • Mounting height up to 49.2ft (15m)max.,suitable for warehourse use,water proof sensor with IP65 rating..
Check Stock

MyGift 12-inch Burnt Wood & Vintage Brass Non-Ticking Wall Clock with Matte Black Face and Exposed Mechanical Gears

  • Wall mounted brass tone metal and burnt traditional analog wood wall clock with matte black face and moving exposed mechanical gears.
  • Minute and hour hands operate silently without any ticking noise **3 AA Batteries Required (Not Included)**.
  • Features roman numerals and moving exposed mechanical gears for an excellent complement to decors with antique or steampunk styles.
  • Can be easily mounted to wall surfaces with appropriate hardware (Mounting hardware not included).
  • Approximate Dimensions: 11.8 Diameter x 3.1 D (in inches).
Check Stock

Hicarer 4 1/16 Inch Gold Skeleton Clock Insert with Gold Bezel

  • Design: the 4 1/16 inch gold roman skeleton clock insert features a clear view of its internal rotating gears.
  • Dimensions: overall diameter is 4-1/16 inch (103 mm).
  • Fit round hold diameter (mounting diameter) is 3-3/4 inch (95 mm).
  • Clear cover with gold border: features a gold-tone plastic bezel, plastic back plate, and glass lens.
  • Big black roman numerals: the obvious comparison can make these numbers stand out, and people will get the time quickly.
Check Stock

TYT 1200lb Boat Trailer Winch with 8M Steel Cable, High-Efficiency Transmission Ratio 4.1:1 Gear Hand Winch with Hook, 2 Way Ratchet Crank Manual Winch for Truck Winch (1200lb with Cable Black Winch)

  • ❆【Capacity】The Heavy duty steel construction hand winch has pulling force for 1200 lbs / 550 kg, Steel Cable Length: 8m(26ft) ø 4.0mm, Mounting base size: 5.35in x 3.48in, Winch Color: black.
  • ❆【Special Surface & Gear】High quality Zinc-Plated black plating finish boat trailer winch for maximum strength and longevity that resists rust and corrosion. Hardened steel gears, high-efficiency transmission ratio 4.1:1. High carbon steel gears to resist wear and last longer..
  • ❆【Handle Performance】 21cm/8.26in, the curved handle of TYT Winches makes it easier to turn, to move something 1200 lbs or less, anti-slip handle ensures a tight grip for less user fatigue and more productivity while cranking the manual winch..
  • ❆【Two Way Ratchet】Mooring hook equipped with a safety pawl, which can ratchet forward and backward. The ratchet winch can be used to lift objects, drag boats, or volleyball net, Ideal for towing or loading boats, personal watercraft, and lawn equipment..
  • ❆【Package & Note】Standard mounting hole, small portable size, easy to install. The inner box package pass the 1-Meter rejection test, protect the product from damage..
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Hi-Caliber Powersports Parts COMPLETE FULL Engine Motor Gasket Kit for the 1988-2000 Honda TRX 300 2x4 & 4x4 Fourtrax

  • Lifan 1P54FMI 125cc engine, Gears: N-1-2-3-4, Automatic clutch with 15T 428 chain sprocket, Shaft size: 20mm.
  • Has the standard mounting points, fit basically any monkey/dax/supercub/pitbike.
  • Replacement / upgrade for Trail Bike CT70 90 110 125 and other most popular bikes.
  • This kit comes with: engine, intake manifold, kick starter, manifold kit.
  • Please check the mounting hole spacing before buying.
Check Stock