Reviews Tank Lid Prop
PR Replacement Humidifier Water Chamber for System One 60 Series (Original version)
- This is NOT compatible with the very similar 50 series line of machines also from Philips Respironics.
- Do not fill the water tank above the maximum fill line. Damage to the humidifier or therapy device may occur. If the water tank is overfilled, water may leak out of the tank inlet (located on the back of the tank) when installing the tank lid. Use only room temperature distilled water in the tank. Do not put any chemicals or additives into the water. Possible airway irritation or damage to the water tank may result. Remove the tank, empty all water, and replace the empty tank before transporting.
Check StockYETI Tank 85 Bucket Cooler Lid
- The YETI TANK Lid is a highly portable party machine designed for advanced beverage distribution.
- Keep your beloved party tub even colder with lid while moving it from place to place or use the Tank as an extra seat.
- Made from UV-resistant, marine-grade material, itll help keep cold in.
- Dimensions for TANK 85 Lid are 21 in long x 21 in wide x 3/8 in high and weighs 3 lbs..
Check Stock30 inch-pound Lid-Stay Torsion Hinge Rustic Bronze 2 per Pack
- STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight....
- LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
- KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
- COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
- EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the....
Check StockLid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2
- LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight....
- LID STAY SLOW CLOSING ---Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
- KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
- COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
- EASY TO INSTALL LID SUPPORT-- Updated install instructions can be downloaded in Amazon page. Easy to follow installation instructions ensure a perfect....
Check StockInitial Command
- 【Tempered Glass Tank 40 Gallon】Patented design 40 gallon reptile tank size: 30" x 18" x 18". Made of high quality tempered glass for sturdy and safe, this wide terrarium tank is suitable for normal reptile amphibian pets as bearded dragon, lizard, crested gecko, frog, snake, tortoise and more..
- 【Top Screen Ventilation】Thin wire top screen provides ventilation and allows uvb and infrared penetration. Raised bottom frame can be fit a substrate heater.
- Waterproof bottom makes this 30 gallon tank can be used both as desert terrarium and rainforest tank..
- 【Front Opening Doors】Two front opening hinged doors of this 40 gallon reptile terrarium can open separately, easy to feed your pet and add decoration..
- 【Great Wire Organization】Prepared 6 inlet holes designed on top lid for wires and tubing. Extra cable pass for wire organization(up to 4 wires)..
- 【Anti Escape】Security buckle on the lid ensure the tank closed tightly, prevent your reptile amphibian chameleon pets from escaping. And the security lock avoid the doors open accidently by your kids and keep....
Check StockRUYUFE Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Easy to Install
- STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight....
- LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
- KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
- COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
- EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the....
Check StockVOCOMO Lid Stay 105 Degree Open with Soft Close, Lid Support Hinge for Toy Box, Easy Install
- LID SUPPORT HINGE – Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close..
- SOFT CLOSE – Lids will lower slowly and gently to avoid slams shut and crush the little fingers of children..
- 105 DEGREE OPEN – The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge can be used for right or left side mounting..
- SMALL COMPACT DESIGN – The compact design allows for installation in tight fit areas..
- EASY TO INSTALL – Easy to follow graphic installation instructions ensure a perfect install the first time..
Check StockNeoflam Midas PLUS 9-piece Ceramic Nonstick Cookware Set with Detachable Handle, Emerald Green, Space-Saving
- Detachable handle attaches/detaches securely to/from cookware.
- Tempered Glass Lid with Silicone and a flat-top knob allows you to prop the lid up without tipping.
- Nestable for compact storage (always use pan protectors or towels inbetween).
- Ecolon nonstick ceramic coating provides superior nonstick performance and highly scratch resistant durability.
- Limited lifetime warranty. Set includes: 1.6qt Stockpot (6″), 2.8Qt Stockpot (8″), 8″ frying pan, 10″ frying pan, 2.8qt (8″) stockpot plastic lid, 1.6qt (6″) Stockpot plastic lid, 1.6qt (6″) stockpot silicone glass lid, 2.8qt (8″) stockpot glass lid, detachable handle, pan protector..
Check StockThey Shall Not Grow Old
- 【Tempered Glass Tank 40 Gallon】Patented design 40 gallon reptile tank size: 30" x 18" x 18". Made of high quality tempered glass for sturdy and safe, this wide terrarium tank is suitable for normal reptile amphibian pets as bearded dragon, lizard, crested gecko, frog, snake, tortoise and more..
- 【Top Screen Ventilation】Thin wire top screen provides ventilation and allows uvb and infrared penetration. Raised bottom frame can be fit a substrate heater.
- Waterproof bottom makes this 30 gallon tank can be used both as desert terrarium and rainforest tank..
- 【Front Opening Doors】Two front opening hinged doors of this 40 gallon reptile terrarium can open separately, easy to feed your pet and add decoration..
- 【Great Wire Organization】Prepared 6 inlet holes designed on top lid for wires and tubing. Extra cable pass for wire organization(up to 4 wires)..
- 【Anti Escape】Security buckle on the lid ensure the tank closed tightly, prevent your reptile amphibian chameleon pets from escaping. And the security lock avoid the doors open accidently by your kids and keep....
Check StockStainless Steel Gravity Water Filter BODY ONLY for AquaCera, Doulton, Berkefeld and Berkey Filters (XL Size (3.8 Gallons))
- Dimensions of Standard Size Body – 20.5” H, 9.125” W (when stacked).
- Dimensions of XL Size Body – 24” H, 9.375” W (when stacked).
- Stainless Steel Parts include: Lower Tank, Upper Tank, Lid.
- Other Parts include: Base Ring, Spigot, Knob for Lid.
- Gallon Capacities represent how much filtered water the bottom tank will hold (with top tank installed).
Check Stock