Reviews T8 Ballasts

GE UltraMax Proline Electronic Ballast 120/277 Volt Instant Start Ballast Normal Ballast Factor Ballast for Fluorescent Light 4 or 3 Lamp T8

  • ELECTRONIC BALLASTS FOR EFFICIENCY AND SAVINGS: the patented instant-start electronic ballasts transform the power of light into efficiency and....
  • BALLASTS FOR LONG BURN APPLICATIONS: UltraMax Instant-Start Electronic Ballasts are intended for long burn cycle applications, and offer a lower cost....
  • MULTIVOLT ELECTRONIC BALLAST: This T8 ballast handles voltage from 120 to 277 Volts..
  • REDUCE GREENHOUSE GAS EMISSIONS WITH GE BALLASTS: These ballasts are among the highest energy-efficient ballasts available and contribute to....
  • VERSATILE BALLASTS: This ballast operates both standard and energy saving lamps, as well as four-lamp or three-lamp orientation..
Check Stock

NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!

  • Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
  • Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
  • All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
  • T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
  • 2-year, warranty does not require registration.
  • however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 3000K

  • ...h new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • ...h new ones to avoid potential arcing and overheating..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, Shatterproof, UL & DLC - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: DLC-QUALIFIED which allows eligibility for state and nationwide rebate programs. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
  • SHATTERPROOF. These T8’s are designed with a frosted shatterproof film protected glass housing which allows for safe installation in fixtures, with or without wire guards..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL - 5000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable.UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

PARMIDA 4 Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Frosted Lens, T8 T10 T12, UL - 4000K

  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes..
  • ENERGY SAVING, BRIGHT LIGHTING: Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill. These lights use only 18W to emit 2200 lumens (equivalent to 40W in fluorescent tubes), making them extra bright and energy efficient..
  • KEEP ORIGINAL TOMBSTONES. This tube installs directly into your fixture’s original shunted sockets (tombstones). You will not need to retrofit your fixture with non-shunted sockets. Single-ended installation will require installation with non-shunted sockets/tombstones. Fast, simple and secure installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • CERTIFICATIONS: This product meets strict requirements to ensure that they are safe and reliable. UL-LISTED to avoid electrical shock and fire hazard. RoHS COMPLIANT (Restriction of Hazardous Substances) making our T8's extremely safe..
Check Stock

Philips LED Instantfit 4-Foot T8 Tube Light Bulb, 1800-Lumen, Cool White (4000K), 16W=32W, Medium Bi-Pin G13 Base, 10-Pack

  • COOL WHITE: Philips LED Instant Fit 4-Foot T8 Tube Light Bulbs offer cool and crisp lighting with high CRI (color rendering index). At 4000 Kelvin these bulbs deliver bright, crisp color ideal..
  • BALLAST KNOWLEDGE REQUIRED: Philips LED 4 Foot T8 Tube Lights Bulbs with InstantFit are the fast and easy way to replace your electronic ballast compatible old fluorescent tubes with efficient LED light. REQUIRES ELECTRONIC BALLAST..
  • ENERGY EFFICIENT: Philips LED Instant Fit 4-Foot T8 Tube Light Bulbs have an estimated annual energy cost of Dollar 1. 93. Philips LED light bulbs are Mercury free and UL Certified..
  • LONG LASTING: These Philips LED bulbs last 10x longer than fluorescent bulbs. Each light bulb is expected to deliver a lifetime of up to 36, 000 hours (based on three hours per day), saving you the cost of frequent bulb replacement..
  • COMPATIBILITY: These Philips LED light bulbs fit in G13 Medium Bi Pin Bases in electronic ballasts.
  • Not compatible with Philips HUE products.
  • Philips LED Instant Fit 4 Foot T8 Tube Light Bulbs are for non connected use only..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 5000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock

PARMIDA 20-Pack 4FT LED T8 Ballast Bypass Type B Light Tube, 18W, UL-Listed for Single-Ended & Dual-Ended Connection, 2200lm, Clear Lens, T8 T10 T12, UL & DLC - 3000K

  • FULLY CERTIFIED. UL-LISTED & DLC-QUALIFIED..
  • BALLAST BYPASS. These tubes must be installed using the ballast bypass method. Use the instructions provided to remove the ballast from your fixtures and directly wire your new T8 tubes. Fluorescent replacement (T8, T10, T12) will save you both time and money as ballasts inevitably fail over time and will require replacement. Ballasts also consume electrical power and by bypassing them you will save even more on your energy bill..
  • SIMPLIFIED INSTALLATION. This tube can be installed with a single-ended or double-ended connection and it can install directly into your fixture’s original shunted sockets (tombstones). This eliminates the need to retrofit your fixture with non-shunted socket (single-ended installation will require non-shunted sockets/tombstones). Fast and simple installation under the functionality of your choice, this tube is designed with user experience as the defining motivator..
  • 5 YEAR UNLIMITED WARRANTY. This product is covered by the Parmida 5 Year Warranty, and our dedicated in-house Customer Service is always here to provide you with peace of mind..
Check Stock