Reviews Suspension Strut Mount Bushing Tool

Suspension Strut Spreader Socket Tool Strut Knuckles Remover Shock Absorber Ram Dismantle Socket Compatible with Audi VW, compatible with Ford, compatible with BMW, compatible with Citroen (Pack of 2)

  • Must Have Tool for Remove Strut : It is quick and easy to remove and replace the strut unit in the front axle use this socket, when replaced the struts or shocks. and very easy to knock it out of the spread position, makes removal suspension strut much easier.
  • Easy To Use: With this spreader, it slides easily into place and effortlessly holds the knuckle apart so you can remove the old strut and pop the new one right in immediately without any struggle. use 1/2" ratchet connect spreader socket.
  • Not Damage Axle: No need to ever again sledge hammer away at the knuckle if you have this tool, eliminating any potential damage to the steering knuckle.
  • Fit Many Automotive: Include 5*8mm, 4.5*6.5mm different size two spreader socket , so this kit fit many car, fit VW Golf IV, compatible with Audi, compatible with Ford, compatible with BMW, compatible with Citroen, compatible with SKODA, Seat, Renault, Peugeot etc.
  • Durable: This suspension strut spreader socket made of high quality steel, high hardness and very strong, and we offer lifetime warranty, we will replace or refund, if our suspension strut socket have any quality problem.
Check Stock

OTC 4244 Freightliner Rear Suspension Bushing Tool

  • OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

Monroe 172604 Quick Complete Strut Assembly

  • ...port the vehicle’s weight and help ensure correct ride height Each spring is painted or powder-coated for excellent rust resistance.
  • Boot Kit The durable strut boot protects the strut rod and seal from dirt and debris The premium bumper prevents component damage when the suspension bottoms out.
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

bimiti Rear Suspension Control Arm Trailing Arm Bushing Tool Removal Tool Kit for Ford Focus Mazda Volvo Bushing Press Kit

  • 【Application】This rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012..
  • 【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability..
  • 【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time..
  • 【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life..
  • 【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we wil....
Check Stock

OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing

  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs.
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs.
  • The OEM Tools bushing driver set includes 20 different size cups for versatile use.
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings.
  • Don’t have to remove components from vehicles with this bushing tools set.
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press.
  • Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible.
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more.
  • Cups with bushing press and pull kit allow for hundreds of combinations.
Check Stock

5pcs Strut Nut Socket 18mm 19mm 21mm 22mm 24mm with 12 Point 1/2 Drive Suspension Strut Nut Socket Tool Easy Remove Strut Nuts

  • 【Specification】 18mm, 19mm, 21mm, 22mm, 24mm strut nut socket with 12 point design, 1/2" square drive slot, The length is 3.1 inches. Various size can meet many different vehicles..
  • 【Function】 Specially designed to remove and install the locking nut on front suspension strut when replace the units. Compact and simple design, easy to carry and use..
  • 【Easy to Use】The strut nut sockets with cut out design allows 90° hex key to hold the strut whilst tightened to correct torque with a torque wrench.These suspension strut sockets can withstand 65-75 N..
  • 【High Quality】Made of high hardened 4140 impact grade steel,with black oxide coating which is great strength, not ease bent, rust-resistance and durable to use..
  • 【Satisfaction Guarantee】If you're not 100% satisfied with this Tool , simply return it for a full refund in 30 days, guarantee with 12 months’ warranty..
Check Stock

8MILELAKE Heavy Duty Coil Spring Strut Compressor Tool Spring Compressor Remover Installer Suspension Tool

  • 【APPLICATION】this coil spring strut compressor tool is ideal for remove and install coil spring & strut. it works as a spring compressor for struts and other coil springs on most passenger and light vehicles..
  • 【DURABLE MATERIAL】the spring compressor remover made of forged steel, strong and durable, not easy to break..
  • 【DOUBLE ENDED JAWS】the spring compressor installer has double ended jaws with attachable security hooks for improving security and control..
  • 【EASY TO USE】the suspension spring compressor tool has easy operation, a great helper for mechanic..
  • 【SIZE】the tool length of the coil spring strut is 12 inches (300mm), the max opening is 10 inches (254mm). please note that the listing is for two compressor with accessories, the spring is not included..
Check Stock

OTC Tools 4247 Hendrickson Suspension Bushing Master Tool Kit

  • Reduces service time to remove and install HD rear suspension bushings substantially.
  • Works on Hendrickson Primaax EX, Comfort Air and FCCC V-Ride Pivot and D-Pin suspension bushings.
  • Tool mounts to suspension for less weight to hold.
  • Tool includes adapters to align it to bushing axis to reduce likelihood of improper installation.
  • Includes a high-force 25-ton cylinder for hard-to-remove bushings and also includes the OTC Stinger Series 2510A Air/Hydraulic Pump, with a Hose and Coupler.
Check Stock

Klimoto Front 2 Wheel Complete Strut Assembly Kit | fits Saturn L300 2001 2002 3.0L V6 Sedan 4-Door | KLI29U1641

  • Original Equipment Style Replacement Complete Strut Assembly Precision Designed For A Direct Fit And To Restore Factory Ride Height.
  • Preassembled Suspension Strut Assembly Including Top Mount, Bearing Plate, Bumper, Insulators and Coil Spring.
  • Make It A Hassle Free Repair With All New Components And Eliminate The Need For Specialty Tools.
  • Includes a pair of Complete Strut Assemblies.
Check Stock