Reviews Suspension Insulator 35kv
Redcat Racing Brushless Electric Tornado EPX PRO Buggy with 2.4GHz Radio Vehicle Battery & Charger Included 1/10 Scale Blue/Silver
- Brushless power system, Aluminum body oil filled shocks, Aluminum shock towers, Front and rear gear differentials, Molded plastic chassis, Ball....
- Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle, Multiple shock....
- 4-Wheel independent suspension, Aggressive racing tires, 5-Star rims, Ready to run..
- 3000KV RC540 Brushless Motor, Waterproof 60A ESC (2s-3s LIPO ready), Waterproof high torque steering servo, 2.4GHz radio system..
- Assembled & Ready to Run - Includes 7.4v 3500mAh 15C LiPO Battery & LiPO Charger - Requires AA Batteries for Transmitter..
Check StockBaomain DDS238-4 (30-100)Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A
- Rate Voltage:220V 230V 240V Rate Current:30(100A).
- 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
- Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
- Accuracy Class:Class 1 Starting Current:0.4%lb.
- 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock2 Pack Antronix CMC2002H High Performance 2-Way Coax Cable Splitter 5-1002MHz
- Works great with: Comcast, Xfinity, RCN, Optimum, Wow, COX, Spectrum, and many more cable providers. Not recommended for Verizon, Direct TV, and Century Link..
- -45 dBmV Spurious and harmonics after 5 surges of 6 kV ring wave with +55 dBmV return signal.
- 6 kV ring with surge protection. Eclipse Contact Technology (ECT) F-Port. Digital Broadcast, HDTV and MoCa Ready.
- Flat 1002 MHz bandwidth with minimal insertion loss. 35 dB return output return loss and 40 dB port-to-port return band isolation..
- Capacitively coupled F ports. SCTE compliant F-ports with 1-inch port spacing. 100% welded back.
Check StockHPI Racing Savage XL Flux GTXL-1 Monster Truck 18 4WD RTR Scale w Brushless ESC and 2.4GHz Radio System
- Factory-assembled & pre-painted electric-powered 4WD 1/8 scale.
- Aluminum front and rear suspension braces.
- Twin vented battery boxes with locking battery box doors.
Check StockTeam Associated 1/10 RB10 2 Wheel Drive Buggy RTR Blue ASC90031 Cars Electric RTR 1/10 Off-Road
- Water-resistant, High-power Reedy Brushless Speed Control With T-plug Connector And LiPo Low Voltage Cutoff.
- High-grip, Off-road Tires with Aggressive Tread Pattern.
- Aluminum 12mm Big Bore Coil-over Shock Absorbers.
Check StockTeam Associated 1/10 RB10 2 Wheel Drive Buggy RTR Red ASC90032 Cars Electric RTR 1/10 Off-Road
- Water-resistant, High-power Reedy Brushless Speed Control With T-plug Connector And LiPo Low Voltage Cutoff.
- High-grip, Off-road Tires with Aggressive Tread Pattern.
- Aluminum 12mm Big Bore Coil-over Shock Absorbers.
Check StockBETAFPV 4pcs 0802SE 19500KV Brushless Motors FPV RC Motors for 1S Brushless Micro Whoop Drone
- 【Wire connection】Using ball bearing, its motion is more smooth and more durable. The lead wire soldered with the PCB, which allows customer to....
- 【Compatible Drone】The 0802 1950KV brushless motor is customized for Beta65X, which supports 2S brushless whoop drones. It is powerful and....
- 【Props&Frames】BETAFPV 0802 19500KV 2S brushless motor is suitable for 31mm 3 or 4 blades propellers with 1.0mm shaft hole and brushless frames....
- 【Weight&Cable】Only weighs 2.03*g/pc with 35mm Micro JST-1.25 3-Pin connector. Supports 7.4V voltage.
- 【Support】If you have any technical support needed please feel free to contact us..
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-300V AC Output 0-5V DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-400V AC Output 0-5V DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-150V AC Output 4-20mA DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check Stock