Reviews Surface mount Signal Isolators

DC 4~20mA Signal Isolator, Module Signal Transmitter Conditioner Signal Converter(One in two out, 0-10V)

• High-quality materials: The signal isolators are made of high-quality materials, which are sturdy, durable and have a long service life..
• Technology: The signal transmitter adopts automatic compensation technology to achieve a temperature drift of less than 25ppm..
• Function: The signal converter is used to protect the circuit board and related equipment from environmental erosion..
• Features: The optoelectronic isolator has the characteristics of good stability, high isolation voltage, fast transmission speed, fast response, and high power carrying capacity..
• Application: The DC signal isolator is resistant to high frequency interference, applicable to a wider environment, and very practical..

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

• 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
• 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
• 【Specification】Max load: 50kg (110lbs).
• The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
• 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
• 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..

Viair 45040 450C Air Compressor Kit

• 12 VOLT - 150PSI Max Working Pressure, engine must be running during use..
• 1.66 CFM Free Flow at 0 PSI, 100% Duty Cycle at 100PSI & 72 degree ambient temperature.
• CFM at 0 PSI - 1.66 / CFM at 100 PSI - 0.94.
• Kit includes 450C compressor, mounting hardware with vibration isolators, freeze-resistant wiring, remote mount air filter assembly, air line for....

Viair 45058 IG Series Compressor Kit

• Included Parts: Installation instructions.

Viair 45041 450H Hard-Mount Automatic Compressor Kit 12V 100% Duty Sealed

Viair 35030 350C Air Compressor Kit

• 12 VOLT - 150PSI Max Working Pressure, engine must be running during use..
• Hardmount unit with mounting feet and four screw positions, includes vibration isolators and hardware..
• 100 percent duty cycle at 100 PSI and 72 degrees F ambient Temp..
• Can be used to inflate helper bags for load leveling, inflate four tires up to 32 inches in diameter or use with heavy duty air horns..

TMH ( Pack of 2 6 Inch 10 LED Surface Mount Oval Clear Lens/Amber Light Turn Signal Side Marker Tail LED Light for Truck Trailer Trail Bus 12V DC

• Package includes 2pcs 7.5" amber Surface Mount Oval Led truck trailer turn signal Lights w 2Pcs Oval Oval Chrome Bezels/Covers. Screws are included for Horizontal and vertical mounting.
• These 6 inch oval led trailer lights Outside surface mount measures 7 1/2" L x 3 1/4" W.
• Actual light measures 6 3/8" L x 2 1/8" W.
• 4 Screw holes for mounting: Vertical Mount hole size: 2-2/3" and horizontal hole size: 6.96" approx..
• Super Brightness: Each amber light has 21 PCS high-quality SMD LEDs to output super bright led light, high brightness for turn signal light, low brightness for parking light or running light, improving visibility and ensuring you a safer night.
• Widely Used: This trailer light work on 12V DC system and is suitable for almost all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just check the size to make sure fit before your purchase.
• NOTE: These amber led lights are IP65 Waterproof, please do not sue it under water, thanks.
• Warranty: We truly offer 1 year warranty for these oval truck trailer front turn signal lights! If have any questions or issues about our Partsam led lights, Please feel free to us and we will reply in 24 hours.

NATIKA Backup/Front/Side View Camera No Distortion Effect Starlight Night Vision HD Metal Flush or Surface Mount CVBS | AHD Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans

• ...6pcs FULL glasses large-aperture optical system,the picture with very low distortion rate,you will get crystal realistic view when you backing up. Also it with a horizontal 135 degree wide view angle lens,it's great for you to check the invisible blind spot clearly and make parking safe and simple..
• Rear view camera surface mount support IP69K waterproof IP rate. It designed with fully sealed glue filling craft, so the waterproof effect is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside. NOTE: please separately order a suitable harness to complete installation if connect it to a FACTORY RADIO..
• Reverse camera flush mount support both CVBS and AHD video signal output(great for Android stereos).CVBS by default,cut the purple wire loop to choose AHD format video signal (AHD,720P,30fps). It with starlight level night vision (0.005Lux,excellent low-light performance),you never worry about parking during night, rainy day or in dark garage..
• Car backup camera's housing is metal,2 in 1 installation option design(surface or flush mount option).Also it is built in 3 multifunctional switching loops: cut the white loop for front view, cut the green loop to remove the guidelines and cut the purple loop to choose AHD format(....

Partsam Rectangular Red LED RV Camper Trailer Stop Turn Brake Tail Lights White License Plate Light 49 LED with License Bracket Holder and White Base 12V Sealed w Reflex Surface Mount (Left + Right)

• 8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base..
• left hand driver's side: 27 Diodes( 22 Red++5 White ).
• this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments..
• It is designed to mount on the surface of a trailer and Camper etc..
• there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved..
• Dimension: overall length: 8 5/8", The height: 3 7/8" and the total depth is 1 3/5".
• Mounting Holes are Approx. 7" by 2 1/2" Apart..

Partsam 18 LED Trailer Bus Mid Turn Signal Marker Light (amber) Side Mount P/T/C Light Clearance with Reflector Replacement for Freightliner Sleepers Side Marker/Turn Signals, 3 wires

• Package includes 1 Piece BRIGHT Amber 18 LED Surface Mount Mid Turn Signal and Marker Light, Hardwired with 3 wires, Mounting Screws are included.
• This Amber Led Side Turn Signal and Marker Light measures 5.85" Long by 2.32" Wide and 2.43" High, Mounting Centers 4.76".
• 18 Amber LED Side Mount P/T/C Light with Reflector.
• This Side Turn Lamp is HARDWIRED with 3 wires: White is ground, Black is low mode for marker light, clearance light or running light, and red is high mode for side turn signal light or auxiliary turn signal light.
• Used on travel trailer, vintage trailer, utility trailer, boat trailer, horse trailer, camper trailer, cargo trailer, motorhome, RV, camper, flat boat, golf cart etc..
• Warranty: We truly offer 1 year warranty! If have any questions or issues about our led mid turn lights, Please feel free to us and we will reply in 24 hours.