Reviews Surface Mount

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ... tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please WAIT 24 HOURS after stuck..
  • 2PCS EXTRA METAL PLATES: Extras tiny metal discs can be use inside of phone socket cap to work with magnetic car phone mount, also can be pasted on cell phone or mobile phone case to works with magnetic car holder. Note: 1. Please stick meta....
Check Stock

Magnetic Phone Holder - TACKFORM [ Tack Mount ] V.2.0 w/N52 Magnets [ for Car, Kitchen, Bedside, Bathroom ] Stick On Dash Mount with Authentic 3M Sticky Adhesive, for Phones, Tablets, and GPS Units

  • WATCH THE VIDEO IN OUR IMAGE CAROUSEL NOW TO SEE IT IN ACTION! Easy to use and does not block the air vent or windshield in the car. All you need is a clean surface and you're good to go. * SURFACE COMPATIBLITY TIP - Designed for hard surface. Hard Textured Dashboards are also suitable. This mount will NOT adhere to leather or soft rubbery dash surface. Clean dashboard thoroughly prior to installing..
  • Better Grip with SILICONE mount head - The softened silicone surface of the magnetic phone holder mount head allows cell phones to be securely mounted while driving and NOT slide around. The silicone surface grip prevents your device from slipping from the magnetic mount while driving. PLEASE NOTE: Metal plates will interfere with wireless charging..
  • High Strength - Tackform uses High Strength Neodymium Magnets to ensure a safe and secure hold on your device while driving. We ALSO provide extra sticky pads for the mount base so that when you decide to relocate your mount, you have a brand new sticky pad to put on the base and have it work like NEW.
  • Universally compatible with smartphones including iPhone X,8/7/6/6s plus/6/6s/5S/5/SE, Galaxy S9/S9+, S8/S8+,S7/S6 Edge, S7, S6, S5, S4 and other Android, Apple, Samsung, Blackberry and Microsoft devices..
Check Stock

Splenda No Calorie Sweetener Value Pack, 800 Individual Packets (Pack of 1), 28.22 Ounce

  • Surface Mount Housings and Back Boxes work in places where it may not be practical to add a wall box.
  • Surface Mount Boxes and Back Boxes have breakouts to match common surface mount raceway systems.
  • Leviton's color matching wallplate series.
Check Stock

MU-CN 12 PCS Replacement Adhesive Stickers for Pop Phone Stand Mount Double Sided Adhesive Pads Circle Sticky Compatible with POP Out Phone Collapsible Grip & Stand/Car Magnetic Phone Mount Holder etc

  • ...esive exclusively designed for grip holder back and various magnetic cell phone car phone mount base. This adhesive replacement kit is a good choice to remount your phone wall mount and magnetic phone mount. With your adhesive cell phone holder, you can position the phone anywhere there’s a flat and hard surface in the car dashboard.
  • Strong 3M Sticky Adhesives: With this car mount replacement parts, you do not worry about purchasing another grip mount. Just remount your expanding stand with this vhb 3m double sided adhesive pads. Best sticker replacement pads for your phone adhesive mount.
  • For best result, please make sure the mounting surface and base of mount adhesive clear cleaned completely before attaching a new 3m adhesive stickers. As for the 3m adhesive tapes, if you find the phone holder adhesive hard to peel, please try to press it back and peel again.
  • Easy to use: You need to remove the used 3m tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3m adhesive sticky circles on the back of grip mount and press firmly for 5 to 10 minutes for better connecting to the car mount base. please wait 24 HOURS to use after stuck.
Check Stock

Heath Zenith SL-257-02 Wired Push Button, Oiled-Rubbed Bronze (Тwo Рack)

  • Works with any Heath Zenith low voltage chime system.
Check Stock

ALFA Outdoor Suction Cup Mount for Alfa WiFi Camp Pro 2/3 & ALFA 4G Camp Pro 2+

  • 【360° Adjustment】Double ball structure, 360° angle adjustment.
  • Can adjust the angle according to different usage scenarios and shooting needs.
  • 【Strong Suction and Stable】 It’s much more stable and absorbs much better compared to the Suction Cup Mount.
  • Large suction force, stable and reliable, can be adsorbed on the surface of any surface with smooth surface.
  • 【Compatibility】The suction cup mount compatible with Gopro 7/8/9/10, DJI OSMO Pocket 2, DJI Action 2, OSMO Pocket, OSMO action cameras, Also some other smart phones, pocket cameras, mirrorless cameras, photography lights and microphones.
  • 【Installation Guide】Please install camera suction mount on the smooth,flat surface as glass.
  • Note: Please unfasten the PGYTECH Pin before adjusting the position.
  • 【Humanized Design】Fully consider storage and carrying, foldable and portable. When not in use, please do not engage the buckle to prevent damage to the performance of the action camera suction cup.
  • Note: Static load should not exceed 1.5 KG.
  • Recommended ambient operating temperature range: -10℃ / 40℃.
Check Stock

Scosche MAGTHD2 MagicMount XL Magnetic Suction Cup Phone Mount for Car Dash Window or Flat Surface Adjustable Stick Grip Base with Magnet Black

  • CAR PHONE HOLDER MOUNT: Safely and quickly secure a mobile device to any flat surface with stick grip material on the base of the suction cup. The....
  • MAGNETIC SUCTION CUP MOUNT: This magnetic phone mount uses an extra powerful Rare-Earth neodymium magnet and provides a secure grip to your devices.....
  • LARGER SURFACE: This XL MagicMount's larger magnetic surface is designed for tablets and larger, heavier cell phones or mobile devices. That means you....
  • CONVENIENT DESIGN: This mount's convenient design features an integrated cable clip that secures the charging cable to the Scosche MagicMount. The....
  • BUY WITH CONFIDENCE: This phone mount is backed by Scosche’s Lifetime Tech Support and a 3-year warranty, meaning you can ensure peace of mind that....
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

Scosche MPQ2WD-XTSP1 Magicmount Magnetic Suction and Adhesive Mount Holder Charger for Vehicles

  • -Phone mount for Versatile use: safely and quickly secure a mobile device to any flat surface with the Stick Grip suction cup base or low-profile....
  • -Magnetic mount: This phone mount with extra powerful Rare-Earth neodymium magnets provide a secure grip to your devices.
  • -Qi wireless charging: the charging mount is compatible with most Qi enabled fast charging devices.
  • -Convenient design: wire clips secure the charging cable to the mount, cradle-free design permits safe, easy one-handed device use and access to all....
  • -INCLUDED IN PACKAGE: (1) Universal 10W Qi Mount, (1) Stick grip Suction Cup Base, (5) Magic Plates, (1) Template Guide, (1) Surface Adhesive Base,....
Check Stock

SCOSCHE MPQ2WD-XTSP1 MagicMount Magnetic Suction and Adhesive Mount Holder Charger for Vehicles

  • PHONE MOUNT FOR VERSATILE USE: Safely and quickly secure a mobile device to any flat surface with the stick grip suction cup base or low-profile dash....
  • MAGNETIC MOUNT: This phone mount with extra powerful Rare-Earth neodymium magnets provide a secure grip to your devices.
  • Qi WIRELESS CHARGING: The charging mount is compatible with most Qi enabled fast charging devices.
  • CONVENIENT DESIGN: Wire clips secure the charging cable to the mount, cradle-free design permits safe, easy one-handed device use and access to all....
  • INCLUDED IN PACKAGE: (1) Universal 10W Qi Mount, (1) Stick grip Suction Cup Base, (5) Magic Plates, (1) Template Guide, (1) Surface Base, (2) Wire....
Check Stock