Reviews Surface Mount Package

Garmin International, Inc. 010-12673-03 Bail Mount with Quick-Release Cradle (12-pin)

  • Surface mount your compatible ECHOMAP Plus chartplotter/sounder combo using our bail mount with knobs.
  • the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease..
  • Package Dimensions: 9.1 L x 33.6 H x 19.9 W (centimeters).
  • Country of Origin : Taiwan, Province Of China.
  • Compatible with ECHOMAP Plus (92sv, 93sv, 94sv, 95sv, 97sv).
Check Stock

Scosche MGQWDEX2-XTET MagicGrip Extendo Wireless Charging Suction Cup Phone Mount for Car in Black

  • ...der mount provides safe and reliable wireless charging for Qi-enabled devices, including fast charging with up to 10-watts of power. Compatible with your iPhone, Android, and most Qi-compatible devices..
  • SECURE PHONE MOUNT WITH AMBIENT LED LIGHT: Secure a mobile device to the dash in your car or on any firm and flat surface with the StickGrip suction cup base. This mount also has an LED light which adjusts in darkness..
  • ADJUSTABLE AUTOMATIC SENSING ARMS: Simply place your device near the MagicGrip charging base and watch the arms automatically adjust to fit your device. To remove your device, just gently pull it away from the charging coil area and MagicGrip will sense and open its arms back up..
  • TELESCOPING ADJUSTABLE MOUNT: The arm on this device adjusts up to 8.87" with 220-degrees of angle adjustment. The mount secures easily to any firm & flat surface with the suction cup base. Once mounted, it lets you find the perfect angle for viewing your mobile phone device for hands-free driving..
  • Included in Package: Included in this package is one Qi Wireless Charging Adjustable Arms Telescoping Mount, a StickGrip Disk, one 12V Car Power Adapter, a USB C Cable, two Wire Clips, one Cleaning Wipe and a User Manual..
  • BUY WITH CONFIDENCE: Backed by Scosche’s Li....
Check Stock

DIYElectronic 50 pcs 2512 SMD Chip Resistor 51 ohm 51R 510 1W 5% Passive Components Resistors

  • Mount Type : Surface Mount (Surface Mounted Devices SMT).
  • Package Content : 200(±2%) Pcs x Chip Resistors.
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

  • ...agnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
  • NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous surfaces. 3.The 3M VHB adhesive pad for dash mount phone holder is one-time use. 4.Please wait at least 24 hours ensure the sticker get the best stickiness. 5.This magic mount adhesive replacement and car mount sticky pad replacement can be a Christmas gifts 2019..
  • Easy Remove and Reattach Car Mount Sticky: These flexible double sided mighty magnetic car mount self adhesive is esay to remove, you can remove dash tray car mount stand without leaving adhesive residue. These car interior cellphone mounts 3M adhesive replacement is easy to reattach, no tool required, just peel and stick. 4pcs alcohol prep pads provided, remember to clean your cell phone holder base and dashboard surface carefully before pasting. Best car phone mount adhesive replacement..
  • Warranty: Volport products provide 12 month warranty. Package comes with 5 pieces universal adhesi....
Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ... tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please WAIT 24 HOURS after stuck..
  • 2PCS EXTRA METAL PLATES: Extras tiny metal discs can be use inside of phone socket cap to work with magnetic car phone mount, also can be pasted on cell phone or mobile phone case to works with magnetic car holder. Note: 1. Please stick meta....
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

[2 Pack] Magnetic Phone Car Mount OQTIQ Multi-Functional Phone Holder Stick On Rectangle Flat Car Dashboard Magnetic Car Mount Holder for Cell Phones and Mini Tablets iPad-Extra Strong with 8 Magnets

  • Multi-Functions Magnetic Mount - The Oqtiq Magnetic Universal Phone Mount is capable of using for many purposes. Use it to safely hold your phone or....
  • Strong Magnets - Built-in 8 industrial strength magnets, this magnetic phone mount will keep your phones securely, to help keep your devices in place.....
  • Sleek Design for Car Mount - This ultra-sleek magnetic phone holder is only 0.19inches thickness, which is perfect for car application. This magnetic....
  • Easy To Use - Make sure the surface area is flat, not curved. Be sure to clean and dry the surface area. Easily tear off the base protection film and....
Check Stock

Epson, EPSV11H985020, PowerLite 119W 3LCD WXGA Classroom Projector with Dual HDMI, 1 Each

  • High Quality: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support up to 33 lbs, so your projector can be better protected and fixed.
  • Full Motion Angle Adjustment: The projector mount direction is fully adjusted with 30-degree tilt, 30-degree swivel and 360-degree rotation, hitting all the right viewing angles.
  • Low Profile Design: Dependable projector mounting bracket holds your projector just 5.5'' from the ceiling surface.
  • Universal Compatible Mounting: This projector ceiling mount supports most projector on the market with distance between the mounting holes on back 12 inches or less. This mount can be used on flat or sloped ceiling.
  • Package includes: A pre-assembled projector ceiling mount and all necessary hardware and instructions booklet. If our product is not suitable for your projector, or if you have any questions about the product and package, please do not hesitate to contact us.
Check Stock

Aketek 4pcs Curved+4pcs Flat Adhesive Mounts Sticky for GoPro Hero Cameras

  • Attach your Hero camera to flat and curved mounts like wall, house and car window and helmet.
  • Can be removed when heat (from a hairdryer) is applied..
  • Compatible with all Hero2, Hero3 and Hero3+ cameras.
  • Package includes 4 flat surface mount and 4 curved surface mount.
  • Suitable for most flat and curved surfaces.
Check Stock

Fingerprint Lock, Smart Biometric Lock for Cabinet Drawer, Child Safety Electronic Fingerprint Door Lock, Keyless Lock for Home Office Wooden Privacy Furniture

  • The package contains one cabinet lock set which includes: one flush mount furniture lock, one skeleton key, one keyhole cover and mounting screws..
  • This small-sized surface mount cabinet lock has a two-way keyhole and can be used on left or right cabinet doors or drawers. The lock is made of antique brass plated steel..
  • Surface mount locks are widely used on grandfather clocks, china and curio cabinets, wardrobes, armoires, and other furniture doors and drawers..
  • Flush mount locks require no mortising and need only to be screwed in from the back side of the door or drawer front..
Check Stock