Reviews Straight Shank Cutter

BISupply Universal Jig Saw Blades Set of 5-46 Grit 4in Diamond Edge Jigsaw Blade Use as Tile Granite Ceramic Cutter

  • [For Your Masonry Needs]: BISupply 4-Inch 46 Grit T Shank Diamond Jigsaw Blade Porcelain Cutter 5-Pack is perfect for tile installers’ toolkits.
  • [Made to Last]: Hand jigsaw tool bar tile cutter is diamond-edged to help you cut tough masonry materials.
  • 46 grit of the jigsaw blade porcelain tile....
  • [Easy to Use]: Install the 1-inch (2.5cm) diamond tip jigsaw blade shaft into your jigsaw (tool not included).
  • At 4 inches (10.2cm), backsplash tile....
  • [Cut A Variety of Materials]: For straight, smooth cuts through granite, marble, porcelain, or ceramic tiles use t shank jigsaw blades.
  • [Perfect for Your Jigsaw]: Diamond tipped jigsaw blade removes materials with optimal control and designed for faster blade change.
Check Stock

CAT40-ER32 Collet Chuck 2.76' Gage Length 8pcs New Tool Holder Set for CNC Engraving Machine and Milling Lathe Tool

  • With good centering function, mainly clamping straight shank cutter.
  • It is often used for clamping end milling cutter, drill bit, tap, reamer, center drill and other cutting tools..
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

Wood Plug Cutters, 8 Pcs Straight and Tapered Plug Cutter Set 1/4', 5/16”, 3/8', and 1/2' Taper Cutting Tool Cork Drill Bit Knife Set with 1/4 Hex Shank

  • Set of 8 Wood Plug Cutter Kit: 4 four-tooth chamfered tapered wood plug cutters and 4 standard straight plug cutters in 1/4", 5/16”, 3/8", and 1/2" diameter..
  • Quick Change Shank: Our dowel cutters equipped with 1/4" quick change shank, which is Universal size, compatible with all 1/4" Quick Change Chucks in drill press..
  • For Better Woodwork: Chamfered Cutters for tapered plugs to conceal screw head and countersunk holes, and to match wood grain.
  • Standard plug cutters for removing imperfections in workpiece..
  • Sharp and Neat: Sharp clean and smooth cutting for round plugs for hiding screw heads, making decorative plugs.
  • Important Tips for Use: In order to have a perfect diameter, a drill press is needed due to the nature of plug cutting. The Plug Cutters are not for hand drills, it is going to wander, be sloppy, or cutter break..
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

scottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set

  • 【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
  • 【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
  • 【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
  • 【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
  • 【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..
Check Stock

General Tools 55 Heavy Duty Circle Cutter Adjustable 1-3/4 Inch to 7-7/8 Inch

  • Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter.
  • The tempered steel body features marked graduations on the beam for fast measurement and application.
  • #55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only.
  • This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more.
  • All adjusments are made with a hex wrench which is included.
  • Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools....
Check Stock

8pcs Carbon Steel Wood Plug Cutter Set,1/4” 3/8” 1/2” 5/8” Barrel Cork Tenon Hole Saw Cutting Tool Drill Bit for Woodworking

  • Wood plug cutter drill bit set: 8pcs wood plug cutter set include 4 standard plug cutters and 4 four-tooth chamfered cutters..
  • More Durable: Wood plug cutter set, diameter sizes include 5/8",1/2",3/8",1/4" (16mm/12.7mm/10mm/6mm), shank diameter: 0.37in/9.4mm..
  • High Quality Material: Straight and tapered taper cutting tool is made of high-carbon steel (45#)..
  • Wide Range of Applications: Can be used with bench drill and hand drill, for easy center, please use bench drill. Please note: it is easy to get burnt when it is running too fast..
  • Good After-sales Service: LYHLYA aim to provide good products and services for our customers. We have good and reasonable return policies. Do not hesitate to contact us if you need any help or have any question, we will be very happy to give you a satisfied solution in time..
Check Stock