Reviews Straight Jack Clamp

Rockler 52” to 104” Low Profile Straight Edge Clamps for Woodworking w/ Extension Tool, 4 Screws, Nuts, & Bolts - 2 Straight Cut T Track Clamp & Handle for Router or Circular Saw Guide

  • Straight Edge Tool Rockler Clamp System: Make your workshop more versatile with our wood cutter hold down clamp. Get arrow-straight cuts with this straight edge wood cutting equipment. The clamp system comes with 2 clamps, a handle, & an extension tool to join the panel and cut large wood. Connect two 52” sections to create a 104” large straight edge..
  • Versatile Uses: The easy assembled cutting straight edge clamp guide works efficiently to cut plywood, timber, and others..
  • Easy to Use: The straight edge clamps slide along an integral T-track to accommodate nearly any size of material..
  • Premium Build: The straight edge clamp is made with durable construction material to withstand the weight of wood in the workshops..
  • What’s Included: This straight edge clamp kit includes (1) Rockler 52” to 104” low profile straight edge system (1) pair of straight line clamps, (1) handle (1) extension tool. The T track system greatly works when you cut the large wood..
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Pro-Grip Straight Edge Clamps (24\ Clamp)

  • Pro Grip Straight Edge Clamps are the perfect combination of a clamp and an edge guide. Think of it instant accuracy for cross-cutting and routing..
  • Use them as a fence on your bandsaw or drill press, or even as an auxiliary fence on your router table or table saw. The Pro Grip Straight Clamps Feature: An extruded aluminum body that is light weight and durable..
  • The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps on the market. Low profile jaws (that never get in the way) are perfect for sanding and routing projects..
  • Get straight and accurate cuts, dados and grooves simply by aligning the clamp on your marks, securing the clamp and make the cut. The jaws firmly hold any piece to the full length of the clamp without any side-to-side play..
  • The smooth cam lock is a one-hand operation and has 3 varying levels of pressure for just the right amount of Grip. This package includes 1 each 24" clamp..
Check Stock

BUNKER INDUST Farm Jack 48" with Jack Base Mate,High Lift Tire Jack Stand Plate Offroad 4x4 Sand Mud Snow Recovery Kit for Car Truck Jeep ATV SUV UTV

  • ...--The High Lift Farm Jack 48 inch all-cast jack is constructed with cast iron components for ultimate strength and durability. This jack is made of heavy duty solid steel construction, durable and sturdy to keep its shape.
  • 【High Quality Material】--Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.Lifting jack base is rugged construction with durable ABS materials for strong strength and long durability.
  • 【Adjustable Farm Jack】--With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.
  • 【Lift your 4WD out of any Situation】--High Lift Farm Jack 48" with jack base is more professional and better for off-road travelling. Lift, push, or pull equipment, small buildings ....
Check Stock

Bitzenburger Fletching Jig only, L-WING

  • 2000 STRAIGHT extra clamp for bitzenburger straight.
Check Stock

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

  • Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
  • Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.
Check Stock

Hi-Lift XT-605 60' X-TREME Jack

  • The Hi-Lift Jack X-TREME jack is our top of the line, all-cast jack that includes many special features.
  • Unique gold zinc-coated winch/clamp/spreader attachment.
  • Charcoal Metallic powder-coated jack with gold zinc-coated handle and hardware.
  • Two piece handle and socket is durable and reliable, Safe use information stickers, including rated load details and operating instructions, affixed to handle.
  • Total length of the jack is 60", The rated load is 4,660 lbs. at 48 inches (2,660 lbs on the upper 12").
Check Stock

BUNKER INDUST Offroad High Lift Jack with Pair Traction Board Mate,48" FarmJack with Sand Mud Snow Track Mat Board,4x4 4WD Offroad Tire Recovery Kit for Car Truck Jeep ATV SUV UTV

  • ...and durability. This jack is made of heavy duty solid steel construction, durable and sturdy to keep its shape.The center of the Traction mat is specially designed with a jack base for emergency work, compatible with all jack.
  • 【High Quality Material】Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.The traction mat is made of UV-stabilized, flexible, super tough engineering-grade reinforced nylon.
  • 【Adjustable High Lift Jack】With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.The traction mat is 10 tons capacity on flat ground.
  • 【Lift your 4WD out of any Situation】High Lift Farm Jack 48" with Recovery Tracks is more professional and better for off-road travel....
Check Stock

BORA 100 WTX Clamp Edge and Saw Plate Set for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length | 545106K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge and Extension include ruled edge for easy measuring. Length-62.75 inch, Width-3 inch, Height-1.5 inch.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
Check Stock

BORA 50\ Ruled WTX Clamp Edge and Saw Plate Set for Woodworking, Contractors, Carpenters and DIY, Guide for Circular Saws, 50 Inch Cutting Length | 545056K

  • WTX Clamp Edge is made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end on straight edge slides easily up and down to fit material to be cut.
  • Locking clamp edge handle grabs work surfaces for a secure edge that won't budge.
  • Clamp Edge includes ruled edge for easy measuring.
  • Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide.
  • Fits right- and left-handed circular saws.
Check Stock