Reviews Jack Plate For Clamp On Motors

Wilderness Systems Transom Trolling Motor Mount for Kayaks

  • Transom trolling motor bracket for clamp-on electric trolling motors.
  • Marine Board backing plate keeps motor clamp tight and secure.
  • Maximum trolling motor thrust of 36 pounds.
  • Heavy duty 13-gauge stainless steel construction.
  • Designed for any boat with a flat spot on the stern big enough for a power pole. Rectangular mounting hole pattern is 3.75” x 4.75”.
Check Stock

KUAFU Jack Plate Adjustable Outboard Boat Jack Plate 6 Set Back Aluminum Boat Motor Power Lift

  • Jack Plates are the perfect solution for long shaft engines with a short shaft transom..
  • This Jack Plate is rated for smaller motors up to 150 hp to improve the performance of your boat. Fits all V-4 and V-6 standard bolt pattern engines..
  • Made of high strength polished Aircraft Quality Aluminum, stainless steel fasteners for maximum strength and durability..
  • Offers 4 inches of adjustable vertical movement, 6 inches of setback, Weighs 20 lbs, 150 Maximum Horsepower. Instructions is included..
  • BUY WITH CONFIDENCE. 100% SATISFACTION GUARANTEE: We are sure you will love our high quality products. However, if you are unsatisfied with either....
Check Stock

NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds

  • Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
  • Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
  • It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
  • Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check Stock

Dead Wedge The Deadlift Jack Alternative for Your Gym Bag - Raises Loaded Barbell & Plates for Effortless Loading/Unloading. Perfect for Powerlifting, Weightlifting, Crossfit, Home Gym & Deadlifts.

  • ... Works where a Deadlift Jacks fail - Deficit Deadlifts, Block Deadlifts, Trap Bar Deadlifts, etc. - all in a compact design that doesn’t take up unnecessary room in your gym, or gym bag..
  • Perfect width keeps the Dead Wedge directly under just a single olympic plate. This means it never interferers with, or gets hung up beneath the other plates being loaded or unloaded!.
  • Specifically designed to keep plates from rolling while loading/unloading.
  • hands off. Does not require you to balance the bar while fetching another plate. The increase in safety reduces accidents, so you can change weights even while the barbell is high up on blocks..
  • Tested to work with all common plate designs including bumper plates, hexagon, etc. Works in excess of over 900 pounds. To use, simply roll the inner plate onto the Dead Wedge, un clamp collar, change weights, lock collars on, roll off and go! *One (1) Dead Wedge included. One is all you need!* If somehow you don't absolutely love it, please make use of our 100% MONEY BACK NO-HASSLE GUARANTEE..
Check Stock

osemar Jack Plates for Outboard Motor 4'' Set Back Adjustable for Boat Steering System

  • Jack Plate gives you a maximum height of 5.500 inches to lift your long axle engine and make it work on short axle beam boats!.
  • Jack plate Weighs 24 lbs.225 Maximum Horsepower, 4 inches of adjustable vertical movement..
  • Jack plate for outboard is made of high strength polished Aircraft Quality Aluminum alloy..
  • Outboard Jack Plate adjusts easily by turning one steel bolt, Professional installation is highly recommended..
  • Package Include:1 x Adjustable Outboard Boat Jack Plate..
Check Stock

SMALLRIG Mounting Plates and HDMI Cable Clamp for Atomos Ninja V CMA2338

  • ▶ Multiple Threaded Holes: Both the top plate and the bottom plate are mounted to the monitor by a 1/4’’-20 screw and two locating pins.
  • Multiple 1/4’’-20, 3/8‘’-16 holes and an ARRI locating hole are also provided.
  • ▶ HDMI Cable Clamp Plate:The HDMI cable clamp plate is mounted to the monitor side by two M3 screws.
  • The HDMI cable clamp works with a range of Atomos cables protecting both the cable and port.
  • ▶ Built-in NATO Rail: On the top and bottom plates are integrated NATO rails for quick release of monitor by SMALLRIG Ballhead Arm 2071 or 2072.
  • ▶ Compatibility with Atomos Master Caddy II: For backwards compatibility with Atomos Master Caddy II, this kit also features Drive locks that incorporate the additional size of standard 2.5’’ drives into the its form factor.
Check Stock

T-H Marine MJ-1-DP Mini Jacker Small Engine Jack Plate for Outboard Motors Only

  • Super for skiffs, aluminum boats, and inflatables.
  • 4" setback, 3" vertical offset, Max Weight: 150 lbs., Max Horsepower: 35 HP.
Check Stock

osemar Jack Plates for Outboard Motor 8'' Setback Aluminum Manual Jack Plate

  • Boat Jack Plate gives you a maximum height of 5.500 inches to lift your long axle engine and make it work on short axle beam boats!.
  • Outboard Jack Plate Weighs 32 lbs, 225 Maximum Horsepower, 8 inches of adjustable vertical movement..
  • Outboard Motor Jack Plate is made of high strength polished Aircraft Quality Aluminum..
  • Outboard Jack Plate adjusts easily by turning one steel bolt, Professional installation is highly recommended..
  • Package Include:1 x Adjustable Outboard Boat Jack Plate..
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

TOYO-INTL Vertical Plate Clamp 2200LBS/1T Vertical Lifting Clamps Jaw Opening up to 0.6'' Steel Plate Lifting Clamp for Vertical Lifting and Transporting (2200lbs)

  • ➤[ SPECIFICATION ]-- Vertical Plate Clamp capacity up to 2200 lbs/1T, and jaw opening: 0-0.6'' .This new model has a larger jaw aperture and can use the same clamp to lift plates of different thicknesses.
  • ➤[ DURABLE ]-- Vertical Plate Clamp are made of high-quality carbon steel, with powder coated surface, and comply with CE safety standards.The vertical hinged lifting clamp ensures durability and longevity.
  • ➤[ 180°ROTATION ]-- Vertical lifting clamp adopts a 180°rotating design, and capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc.
  • ➤[ EASY TO OPERATE ]-- Plate clamps eliminate the need for drilling or creating a hitch.To lift a plate, the teeth of the plate clamp need to be pushed into the plate, and the load can be placed and lifted from any direction.
  • ➤[ SAFETY PROTECTION ]-- Vertical Plate Clamp included a reliable safety mechanism and locking lever, and stay closed to prevent accidental release.Please feel free to us if you have any problems.
Check Stock