Reviews Steel Rule Diemaster - BestBuyersPro.com

General Tools 444 Depth/Angle Gage

This easy-to-use depth and angle gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface.
The hardened steel base is grooved on both sides to deliver accurate angles.
Permits easy setting of the protractor angle to 30, 45 and 60 degree on both sides.
The rule can also be used as a depth gage for measuring small holes and slots.
Spring tension nut eases depth and anglemeasuring by securing rule in milled slot at a 90 degree angle to base.
This gage features a 6 inch by 1/4 inch etched stainless steel rule graduated in 32nds and 64ths with a 2-1/2 inch wide hardened steel base.

6" / 150 MM DEPTH GAUGE METRIC & IMPERIAL STANDARDS - ENGINEERING.
This steel depth gauge is used to quickly obtain measurements of holes or grooves by adjusting the rule to the desired depth.
This depth gauge consists of a gun metal finished base and a steel rule.
This gauge can be adjusted to the required measurement and then locked into position by a knurled nut.
Head is cut out on one side, adjacent to the rule, permitting easier and more precise measurements.

General Tools and Instruments CF1264 Ultra Test Flex Steel Rule, 12 In., 1 In. Wide, 1/8-1/16-1/32 and 1/64 is a ruler is for machinists.
The markings are ultra fine black for easier reading and deciphering.
The rule is 12 inches long, and has a width of 1 inch.
The graduations of measure are 1/8, 1/16, 1/32 and 1/64 inch.
Features a plastic sleeve for corrosion prevention and a hard satin chrome finish.
The rule is 12 Inch long and has a width of 1 inch.

General Tools and Instruments CF1845 Ultra Test Rigid Steel Rule, 18 In., 3/4 In. Wide, 1/32-1/64-1/10 and 1/100 is a ruler is for machinists.
The markings are ultra fine black for easier reading and deciphering.
The rule is 18 inches long, and has a width of 3/4 inches.
The graduations of measure are 1/32, 1/64, 1/10 and 1/100 inch.
Features a plastic sleeve for added corrosion protection, and a hard satin chrome finish.
The rule is 18 Inch long and has a width of 3/4 Inch.
Features a plastic sleeve for added corrosion protection and a hard satin chrome finish.

Instead of squinting at that blur of lines along the edge of your old steel rule.
Incra has re-invented the steel rule by putting micro-fine holes at every scale position.
Using a T-square this guide draws perfectly placed horizontal lines with dead-on accuracy, with guide slots that wrap around any edges.
Rule Set that lets you mark precisely where you want.
Micro-fine holes at every scale position.
Perfectly placed horizontal lines with dead-on accuracy.
Helps you draw perfectly placed horizontal lines.

General Tools and Instruments 308 Precision Flex Steel Rule, 6 In., 3/4 In. Wide, 1/32 and 1/64 Inch is a ruler is for machinists.
The markings are ultra fine black for easier reading and deciphering.
The rule is 6 inches long, and has a width of 3/4 inches.
The graduations of measure are 1/32 and 1/64 Inch.

General Tools and Instruments 307 Precision Flex Steel Rule, 6 In., 3/4 In. Wide, 1/8-1/32 and 1/64 Inch is a ruler is for machinists.
The markings are ultra fine black for easier reading and deciphering.
The rule is 6 inches long, and has a width of 3/4 inches.
The graduations of measure are 1/8, 1/16, 1/32 and 1/64 Inch.
Features a polished stainless steel finish.

Easy to Use - The square head can be moved up and down on the rule with a lockable assembly and a specially designed bolt to engage the slot for....
Perfect Attachment - The Center Head is an available attachment that provides an easy means of accurately locating the center of cylindrical or square....
Get Accurate Measurements - The protractor head has revolving turrets with direct-reading double graduations, a full 0 to 180° range in opposite....
Complete Quality Made Tool - The set includes the rule, square, protractor, and center heads that are made from durable hardened steel, which can....
Versatile Layout Tool - Starrett squares are offered in a practical variety of styles to suit the needs of the individual, whether it be a toolmaker,....