Reviews Split Ender Pro Before And After

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

  • Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
  • Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
  • Precise Detection: Blue LED indicates normal filament feed-in.
  • Blue LED turns off when filament runs out..
  • IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
  • Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock

Split Ender Pro 2 Automatic Easy Split End Remover, Damaged Hair Repair Trimmer for Broken, Frizzy, Dry, and Brittle Split Ends, Men & Women Hair Care Treatment - Red

  • ...eakage and damaged hair caused by blow dryers, flat irons, chemicals and color treatments..
  • 【For all types of hair】 Designed for frizzy, curly, straight, thick or thin hair as long as the hair is chin length or longer. Frizzy hair may require you to flat iron your hair before using the Split-Ender. Results may vary depending on the customer's previous hair condition..
  • 【Rechargeable Battery included】 Power Adaptor: Bi-Volt 110-240 Volts. Use plugged in or wireless. Charge the battery before use for 3 to 4 hours. Comes with a fix (1/4") trim setting, cleaning brush and carrying bag. Convenient for storage..
  • 【New and Sealed】 Easy to open packaging. Product requires Fully Charged Batterie in order to work as intended. From start to finish, place small strands of hair to get the best result and texture. Thanks to the user manual, the buyer can discover all the functionalities before using the Split Ender and the care necessary to preserve the unit in optimal conditions..
  • 【Ideal Gift & One-Year Warranty】 This hair trimming device is the best gift for any fam....
Check Stock

Split Ender Pro 2 Hair Breakage Tool Automatic Cut Split End Remover, Trimmer for Broken, Dry, Damaged, Brittle and Frizzy Split Ends, Men & Women Healthy Beauty Personal Care - Black

  • ...ofter natural shine. The perfect tool for breakage and damaged hair caused by blow dryers, flat irons, chemicals and color treatments..
  • 【For all types of hair】 Designed for frizzy, curly, straight, thick or thin hair as long as the hair is chin length or longer. Frizzy hair may require you to flat iron your hair before using the Split-Ender. Results may vary depending on the customer’s previous hair condition. Hair trimmer designed for both men and women..
  • 【Rechargeable Battery included】 Power Adaptor: Bi-Volt 110-240 Volts. This electric hair clipper can be used plugged in or wireless. Charge the battery before use for 3 to 4 hours. Comes with a fix (1/4″) trim setting and accessories. Convenient for storage around your traditional men hair clippers or nose hair trimmer..
  • 【New and Sealed】 Easy to open packaging. Product requires Fully Charged Battery in order to work as intended. From start to finish, place small strands of hair to get the best result and texture. Thanks to the user manual, the buyer can discover all the functionalities before using the Split Ender and the care necessary to preserve the unit in optimal conditions..
  • 【Ideal Gift & One-Year Warranty】 This hair trimming device is the best gift for any family member or cl....
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Creality CR Touch Auto Bed Leveling Sensor Kit. Creality Official Specially Designed for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5/Ender 5pro/CR10 for 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

  • 【After-sales Service】 Life-time professional technical supports,If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours..
  • 【Easy to Install and Use】The kit contains 3 different mounting brackets and extension cords. You can easily install.
  • 【Product Durability】 Creality CR Touch is specially designed for 3d bed leveling for Creality 3d printers. Compared with BL Touch, it has stable quality, long service life, and can be reused more than 100,000 times..
  • 【Creality ideal companion】CR Touch works for Ender3 v2/Ender3/Ender3s/Ender3 Pro/Ender 3 Max/Ender5/Ender5 Pro/Ender5 s/ CR 10 with 32 bit motherboard.(3d printer accessory with the best experience).
  • 【Strong compatibility】CR Touch 3d printer auto leveling,Compatible with PEI / sticker bed / glass bed / metal bed.
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

UniTak3D Ender 3 Direct Drive Upgrade Kit Conversion Bracket Compatible with Creality Ender 3 V2,Ender 3 Pro and Voxelab Aquila 3D Printer Dual Gear Extruder&Bowden Extruder

  • 【Application】:The direct drive upgrade kit is suitable for Ender 3 V2,Ender 3 Pro,Ender 3,Voxelab Aquila 3D printers,NOT compatible with Ender 3 Max,Ender 3 Neo,Ender 3 V2 Neo,NOT compatible with TITAN extruder..
  • 【Outstanding Extrusion Control】:A direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube. It provides precise retraction and a better print result..
  • 【Stable Operation】:The holes of the Split Type conversion bracket are perfectly aligned, with supports on both sides to keep the center of gravity in the middle, and the structure is more stable..
  • 【Flexible Filament Supported】: Compared with bowden extrusion,this direct drive extrusion greatly improves print quality of TPU and other flexible materials..
  • 【Easy Installation】:No X,Y or Z-axis build volume lost. No firmware or wiring modification.Just tear down the original Ender 3 series plate and mount this direct drive upgrade kit..
Check Stock

Split Ender Mini Portable Fast Hair Treatment, Fix Split Ends Remover, Hair Trimmer for Broken, Dry, Damaged and Brittle Split Ends, Men and Women Hair Products Beauty Treatment Tool - Blue

  • ...ofter natural shine. The perfect tool for breakage and damaged hair caused by blow dryers, flat irons, chemicals and color treatments..
  • 【For all types of hair】 Designed for frizzy, curly, straight, thick or thin hair as long as the hair is chin length or longer. Frizzy hair may require you to flat iron your hair before using the Split-Ender. Results may vary depending on the customer’s previous hair condition..
  • 【3 AAA batteries included】 This travel-friendly tool is cordless and comes with everything you need: carry bag, instruction manual, cleaning brush, styling comb, and sectioning clip. Convenient for storage..
  • 【New and Sealed】 Easy to open packaging. Product requires the use of Fully Charged/Brand New Batteries in order to work as intended. From start to finish, place small strands of hair to get the best result and texture. Thanks to the user manual, the buyer can discover all the functionalities before using the Split Ender and the care necessary to preserve the unit in optimal conditions..
  • 【Ideal Gift & One-Year Warranty】 This hair trimming device is the best gift for any family member or close friend. We provide a 1 Year Warranty so please feel free to contact us if you are not satisfied and we will provide you a 100% satisfact....
Check Stock