Reviews Spiral Upcut Bits

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters for Mills Machines

  • UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • The router bit suit for CNC router and any plunge routers with 1/4" collet..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

Andis Blade Care Plus Jar

  • Professional Flush Trim Router Bit with Top Bearing: 1/4” Shank, 1” Cut Length. The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use..
  • INDUSTRIAL QUALITY UPCUT FLUSH TRIM ROUTER BIT: Made of solid VIRGIN carbide with NANO blue coated. And Nano Blue Coating with high hardness and heat resistance enables the tool’s cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Up to 2.5X longer life compared to uncoated bits..
  • The 1/4-Inch flush trim Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp..
  • The spiral router bit suit for CNC router and any plunge routers with 1/4″ collet..
Check Stock

SpeTool Extra Long CNC Spiral Router Bits with Up Cut 1/8 inch Cutting Diameter, 1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length.
  • For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Upcut Spiral CNC Router Bits with 1/2 Inch Shank , 1/2 Inch Cutting Diameter HRC55 Solid Carbide CNC End Mill for Wood Mortises and Cutting Dadoes Carving Engraving Tools

  • Solid Carbide Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

CMT 806.690.41B Xtreme Compression Flush Trim Bits 2 Flutes Carbide Tipped

  • These XTREME flush trim bits guarantee the best possible finish along with extra-long life thanks to one-of-a-kind spiral technology..
  • The compression, spiral design with 4 cutting edges produce a flush trim bit that has an upcut shearing cut on one half of the bit and a downcut shearing action on the other half. This design eliminating splintering and tearout on the top and bottom of the material you’re working with..
  • Made with high quality carbide are crafted using special brazing techniques..
  • Ideal for flush trimming and pattern routing on projects involving solid wood, melamine and veneers..
Check Stock