Reviews Milling Bits

Yakamoz 10-Pack 1/8" Shank Upcut Spiral Router Bits 3-Flute 7/8" Cutting Length CNC Router Flat End Mill Bits for MDF Acrylic Wood PVC 7/8" Cutting Length

  • Type: Spiral (Upcut), Cutting Type: 3 Flutes with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 7/8" (22mm), Overall Length: 1-33/64" (38.5mm).
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits..
  • The unique flute design makes cutting process easier and faster, smooth cutting without 2nd polishing process..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
  • Built with tungsten steel, the CNC router mill has the superiority of high hardness, high-temperature resistance, and wear resistance..
Check Stock

SainSmart Genmitsu 10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8' Shank

  • ➤Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs..
  • : ➤Advantage: With sufficient flexural strength and wear resistance, which ensure high work efficiency. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches..
  • ➤Material: Using ultra-fine grained carbide material, with good milling and cutting performance..
  • ➤Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing..
  • ➤Genmitsu CNC Bits Selection Guide: To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
  • This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill router bits are used for side milling, end milling, finish machining, etc..
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

  • ★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
  • ★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
  • ★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
  • ★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
  • ★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 6mm/0.23".
  • [Single Flute End Mills]: 5 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

Genmitsu CNC Wood Carving Router Bits Set, 1/4'' Shank, 4 PCS, 15° Detail Carving Liner+ 20° Profile bit+ 60° & 90° V Groove, WC04A

  • High Quality: Made of Premium Tungsten Carbide Steel Alloy. That's great for milling and cutting performance, ensuring that our bits stay sharp and provide nice clean cuts. The Nano Blue Coating with high hardness and heat resistance is durable and not easy to break..
  • Efficient Cuts: This wood carving set comes with 4 PCS, 1/4” shank router bits. 1PCS 20° profile bit for etching and outlining.
  • 1PCS 15° carving liner for fine lines and details.
  • 60° & 90° V groove bits for multiple background depths..
  • Shank diameter: 1/4''(6.35mm), cutting diameter: 0.2mm, overall length: 50mm..
  • Applicable Materials: Suitable for MDF, PVC, Acrylic, wood, solid wood, plywood, organic board, etc. Highly recommended for wood carving. Widely used for cutting/ engraving/ carving/ grooving/ slotting/ drilling/ hollowing/ positioning/ roughing / milling..
  • Wide Compatibility: Genmitsu WC04A Wood Carving Router Bits Set are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 3.175mm 1/8”.
  • [Single Flute End Mills]: 10 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • Offer a smooth cutting surface and chip clearing.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock