Reviews Spiral Flutes

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

IRWIN Screw Extractor for Spiral Screws 5-Piece 53535

  • Designed to remove broken studs, bolts, socket screws and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Extractor size and recommended drill bit size are etched on each tool.
Check Stock

DeWalt DT0109 Screwdriver and Drillbit Set (109 Pieces)

  • Designed to remove broken studs, bolts, socket screws and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Extractor size and recommended drill bit size are etched on each tool..
Check Stock

Greenfield Threading 330133 GT/VTD SPGP D5 2FL GP Plug Spiral Point Tap, M8 x 1.0 mm

  • Greenfield Threading Plug spiral point tap: M8x1.0: Limit D5 number of flutes: 2. HSS substrate, bright finish..
  • Made from Premium High Speed Steel and Bright finish.
  • Made to Table 302A. 1.0 Threads Per Inch.
Check Stock

Hanson 52402 Extractor Ex-2 Spiral, for Tap Die Extraction

  • Screw extractor set is designed to remove broken studs, bolts, socket screws and fittings.
  • Screw extractors feature an aggressive left-hand spiral design for extra gripping power.
  • IRWIN screw extractor size and recommended drill bit size are etched on each tool.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Recommended for use with TR-88 tap wrenches and 7/64-inch drills.
Check Stock

IRWIN Screw Extractor Set, Hex Head, Multi-Spline, 25-Piece (53227)

  • VERSATILE: Remove broken studs, bolts, socket screws and fittings for high torque applications.
  • GRIPPING POWER: Aggressive left hand spiral design for extra gripping power.
  • EASY-OUT STYLE: Spiral flutes embed themselves to increase grip as resistance increases.
  • ETCHED SIZES: Extractor size and recommended drill bit size are etched on each tool.
  • 25-PIECE SET: Hex head multi-spline extractors from 1/8"-7/8" in heavy-duty carrying case.
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

9PC JUMBO SCREW EXTRACTOR SET BOLT STUD PIPE REMOVER EZ EASY OUT 5/64 - 1 1/16'

  • Designed to remove broken studs, bolts, socket screws and fittings.
  • Aggressive left hand spiral design for extra gripping power.
  • Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.
  • Extractor size and recommended drill bit size are etched on each tool.
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock