Reviews Spindle Travel 90mm

TEXALAN 4 Two Axis 90 Degree Cast Iron Welders Welding Angle Clamp

  • [CLAMPING RANGE]: Width of jaw is 4" (100mm), and Max.opening is 3" ( 75mm).
  • [FEATURES]: Unobstructed working area allows free access for welding or assembly operations and through-ways for T joints..
  • [SPINDLE]: Two-way swivel mounted spindle automatically adjusts the clamping block to work pieces of different thicknesses..
  • [APPLICATION]: Mainly used for iron products angle welding. Ensure welding into right angle (90 degrees), square, rectangle and other steel products..
Check Stock

BestEquip Metal Lathe, 8\ x 16\ Benchtop Lathe, Mini Metal Lathe 0-2500 RPM Variable Speed, Mini Lathe with 3-Jaw Chuck, Bench Top Metal Lathe, for Various Types of Metal Turning

  • Infinitely Variable Speed: The mini metal lathe with metal gears is driven by powerful motor. Variable Speed: 0-2250RPM. The LED screen shows you a clear and accurate speed for accurate working. Operate either manually or with the adjustable auto feed rate. Spindle Accuracy: 0.0004-0.0012" (0.01-0.03 mm)..
  • 400mm Large Swing Range: The benchtop lathe is equipped with a 3-jaw chuck. Swing Over Bed: 8-1/4" (210 mm) and Swing Over Cross Slide: 15-3/4" (400mm) offers more possibilities for large size or/and heavy workpieces..
  • Professional Compound Rest: The mini lathe machine quick change tool post can achieve positions of internal cutting, face cutting, and bevel cutting by changing the tool post angle and adjusting the compound rest, moving blades freely with feed rod. 4-Way turret tool post (3/8" max tool size)..
  • Supportive & Protective: Soft start, change-over switch for clockwise or counter-clockwise spindle rotation. Equipped with all-metal gears. Steady rest works as end support ensuring chatter-free operation. Backsplash guard included..
  • Adjustable Tailstock: Taper in Tailstock Spindle: MT2. Rotate the lever clockwise to lock the spindle and rotate clockwise to advance the handwheel. To off-set the tailstock for cutting tapers by adjusting the four se....
Check Stock

DAEDALUS CNC Router Machine 3018 Max, 3 Axis, 200w Spindle, All Aluminum Frame

  • ★Pre-assembled module, all aluminum frame and spindle holder with the lead screws, guide rods..
  • ★Designed to use GRBL1.1 firmware, support PC control and offline control..
  • ★Offline controller, control without computer, a great convenience and a space saver..
  • ★Max travel of X/Y/Z Axis, 300 x 180 x 45 mm. Spindle, 200w, 12000RPM. T8 lead screw, 2mm pitch..
  • ★Good at cutting strong wood(oak, pine, poplar), acrylic,plastic,PCB and aluminum..
Check Stock

Fowler 52-520-109-0, Adg Dial Indicator With 0-1\ Measuring Range (Black)

  • Microfine, white graduations against a black dial.
  • 0-100 continuous reading with revolution hand that indicates every .10": movement mounted independently from the case ensuring perfect and permanent alignment.
  • Carbide ball contact point for extended wear resistance.
  • Spindle rack and pinion are made of hardened stainless steel.
  • Forged brass body with hardened brass gears.
  • Features a 2.25" diameter dial face (Meets AGD Group II specifications) with 0.001" graduations.
  • Supplied with a center lug back to allow positioning every 90°.
  • Approximately 2-oz. of measauring pressure.
  • Features extra-long springs for uniform pressure through entire travel of spindle with a knurled bezel that easily adjusts 360°.
  • full 1-year warranty offered by Fowler High Precision.
Check Stock

Fowler 52-520-110-0 Adg Dial Indicator With 0-1 Measuring Range

  • PRECISION MEASUREMENTS: Features a 2.25" diameter dial with 0.001" graduations.
  • EASY READINGS: Microfine graduations in black for 0-100 continuous readings and red for 0-50-0 balanced readings.
  • movement mounted independently from the case on a rigid supporting plate, ensuring perfect and permanent alignment.
  • MEASURING PRESSURE: Supplied with lug backs positioned in 90° increments.
  • Group II and III gages measure with approximately 2oz. of pressure.
  • DURABLE CONSTRUCTION: Spindle rack is made of hardened stainless steel and features a carbide ball contact point.
  • brass cases and hard brass gear wheels prevent wear.
  • pinions of steel hardened, tempered, and lapped on teeth.
  • HIGH-QUALITY TOOL: Features extra-long springs for uniform pressure through entire travel of spindle with a knurled bezel that easily adjusts 360°.
  • full 1-year warranty offered by Fowler High Precision.
Check Stock

BW USA Bicycle Crank Puller – Crank Removal Tool for Mountain and Road Bikes with Square Taper Bottom Bracket Spindles

  • ... bike mechanics and cycling enthusiasts who are looking to save money by doing their own bicycle maintenance – Required tool to remove crank arms and gain access to the bottom bracket which may have come loose and resulted in creaking and/or wobbling.
  • COMPATIBILITY – Compatible with square tapered bottom bracket spindles – Not suitable for Octalink or ISIS bottom brackets – Not sure what bottom bracket type your bikes has? Remove the crank fixing bolt which attaches the crank arm to the spindle. If the shape of the axle that you see is square then this is the correct tool for your bike.
  • QUALITY CONSTRUCTION – Quality tool made from heat-treated steel to ensure years of use.
  • SIMPLE TO USE – 1. Remove the crank arm fixing bolt (either 8mm hex or 14mm socket depending on the bike) from the crank arm - 2. Use a 15mm spanner (open end wrench, crescent wrench or something similar) to thread the bottom bracket tool to the bicycle crank - 3. Attach an 8mm hex wrench to the end of the bottom bracket tool and rotate clockwise until the crank arm is freed from the bottom bracket spindle.
Check Stock

ANSJS Mountain Bike Pedals MTB Pedals Bicycle Flat Pedals Aluminum 9/16 Sealed Bearing Lightweight Platform for Road Mountain BMX MTB Bike…

  • SUPER GRIPPY - Each side of pedal with 10 replaceable hex traction pins,strong grip makes riding safer and braver for jumping..
  • ULTRA SMOOTH BEARINGS - 100% Cr-Mo spindle 9/16 threading with sealed bearings. Ride efficiently with high configuration,the spindle was made of....
  • WIDE PLATFORM - With 100mm wide platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you..
  • UNIVERSAL - Suitable for most of the mountain Bikes, Road Bikes, BMX Bikes, Folding Bikes, Urban Bikes, Travel Bikes, Fixed Gear Bikes, Unicycles,....
  • EASY TO INSTALL: L for left,R for right. 9/16" screw thread, diameter 14.3mm,Using 8mm hexagon installation and removal.You can receive your full....
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

MDEAN ANSJS Mountain Bike Pedals MTB Pedals Bicycle Flat Pedals Aluminum 9/16 Sealed Bearing Lightweight Platform for Road Mountain BMX MTB Bike…

  • SUPER GRIPPY - Each side of pedal with 10 replaceable hex traction pins,strong grip makes riding safer and braver for jumping..
  • ULTRA SMOOTH BEARINGS - 100% Cr-Mo spindle 9/16 threading with sealed bearings. Ride efficiently with high configuration,the spindle was made of....
  • WIDE PLATFORM - With 100mm wide platform pedals supports the foot more evenly when riding, provide more comfortable riding experience for you..
  • UNIVERSAL - Suitable for most of the mountain Bikes, Road Bikes, BMX Bikes, Folding Bikes, Urban Bikes, Travel Bikes, Fixed Gear Bikes, Unicycles,....
  • EASY TO INSTALL: L for left,R for right. 9/16" screw thread, diameter 14.3mm,Using 8mm hexagon installation and removal.You can receive your full....
Check Stock

q&p Spindle Assembly Replaces 918-04889A 918-04822A 618-04822A 618-04950. Fits LTX1040 Tractor (2010 & After) 13AX90AS010 13RX90AS056 13AX90AS009 13WX90AS010 13WX90AS009

  • Replaces 618-04822 618-04822A, 618-04950, 918-04822, 918-04822A, 918-04822B, 918-04889A, 918-04889B, 91804822, 91804822B.
  • Replaces Oregon 82-058 Rotary 14328 Stens 285-868.
  • Fits Models LTX1040, LTX1042, 13AX90AS009, 13AX90AS010, 13AX90AS209, 13AX9124010, 13RX90AS056, 13RX90AS256, 13WX90AS009, 13WX90AS010, 13WX90AS209, 13WX91AS010 Garden Tractor (GT) From No.769-10425 , RIDER 76,KT725-3012, 13CC26JD011, 17ARCACS011, 21R707-0039-G1,HYDRO, SCOOTER PRO,Garden Tractor (GT).
  • Specs: Height: 6-6/7"(174mm) , Pulley OD: 6-1/6"(157mm).
Check Stock