Reviews Spindle Travel 150

Grizzly Industrial G0705-8 x 29 2 HP Mill/Drill with Stand

  • Max. distance spindle to table: 17-5/16".
Check Stock

Shop Fox W1827 Shaper 5 Horsepower

  • Motor: 5-horsepower, 220V, single-phase, 25A, 3450 RPM.
  • 3-1/4-inch spindle travel, spindle speeds: 3600, 5100, 8000 and 10000 RPM.
  • Precision ground cast iron table 35-1/2-by-28-by-2-5/16-inch.
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

Shop Fox W1668 3/4-HP 13-Inch Bench-Top Drill Press/Spindle Sander

  • Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM.
  • Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums..
Check Stock

Western Digital Caviar SE 80GB SATA WD800JD 7.2K Hard Drive

  • Western Digital WD800JD 80 GB Serial ATA 150 Hard Drive General Features: 80 GB storage capacity.
  • 7200 RPM spindle speed 8 MB Buffer 4.20 ms average latency Average Read Seek Time: 8.9 ms.
  • Buffer to Host (transfer rate): 150 MB/sec. SATA/150 interface 3.5-inch form factor.
  • Power Specifications: +5V, 0.45A +12V, 0.50A Regulatory Approvals: cULus CE C-Tick BSMI MIC.
Check Stock

Big Horn 19534 2 inch Dia x 1-1/2 Inch Sanding Sleeves

  • 18 Pack oscillating spindle sander sleeves - 80 / 150 / 240 grit assorted, 6 Pack per grit - 1/2 inch, 3/4 inch,1 inch, 1-1/2 inch, 2 inch and 3 inch sanding sleeves for each grit, all 4.5" in length.
  • Different diameters and grits fit your task and machine perfectly.
  • Aluminum oxide abrasive sleeves provide high performance for professional material removal, sanding, and resurfacing.
  • Fit most Oscillating and Spindle Sanders such as RYOBI, DELTA, GRIZZLY, ENLON, POWERTEC, WEN, Rockwell, Fox, Triton.
  • If you have any problem,contact us and we will give you 100% Satisfaction Guarantee.
Check Stock

SainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO

  • This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
  • Software: GRBL controller, UniversalGcodeSender..
  • Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
  • Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check Stock

Grizzly Industrial G1026-3 HP Shaper

  • 2 spindle speeds: 7,000 and 10,000 R.P.M..
  • 3 H.P., single phase, 220V motor with reversing switch.
  • 3 interchangeable spindles: 1/2", 3/4" and 1".
  • Table with standard wing attached measures 30-1/2" x 28-1/4".
Check Stock

Delta 18-900L 18-Inch Laser Drill Press

  • Range of speeds: 140 260 320 380 480 540 980 1160 1510 1650 2180 3050 RPM Spindle.
  • Range of speeds: 140 260 320 380 480 540 980 1160 1510 1650 2180 3050 RPM.
Check Stock

SHOP FOX M1036 Micro Milling Machine, Small

  • Item may ship in more than one box and may arrive separately.
  • Motor: 0.2 HP, 2A, 110 Volt, single-phase.
  • Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500.
Check Stock