Reviews Spindle Pin
Southwest Wheel R30484X 84 Spindle & 5-5\ Bolt Circle Trailer Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockSOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 4-4\ Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockSOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5\ Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockSOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 4-4 Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockSOUTHWEST WHEEL 2-Pack 2,000 lbs Trailer Axle Spindle with 5-4.5 Bolt Circle Hub
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle..
- Spindle includes spindle nut, spindle washer, and cotter pin..
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts..
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs..
Check StockGrizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe
- 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
- Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
- Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
- Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
- Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check StockLEAPGOMAX Golf Cart Spindle Bushings Kit fit EZGO TXT/PDS 2001-UP Gas & Electric, Bushing Spindle, King Pin Tubes, Claw Copper Sleeves Kit, OEM#70648-G01 70749G01 70745G01
- ⛳Fits Golf Carts: Colf Cart 2001-current E-Z-GO Gas & Electric TXT/PDS(Will not fit for EZGO RXV)4/6-Passenger Shuttle, ST 400, Woods Boundary MAV 400..
- ⛳Fits ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200..
- ⛳Fits Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles..
- ⛳High quality with heavy duty exceed OEM quality Golf Cart Spindle Bushings Repair Kit Assembly..
- ⛳Package: 2 PCS Spindle King Pin Tubes, OEM# 70745-G01,614034, 601707.
- 2 PCS Spindle Bushing with Flange, OEM#70648-G01, 632925, 601915.
- 2 PCS Spindle Bushing without Flange, OEM#70749-G01, 632926, 601916.
- 2 PCS Spindle King Pin Bolts, OEM#00407-G6, 620380.
- 2 PCS Thrust Washers, OEM# 70754-G01, 601920.
Check StockSainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO
- This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
- Software: GRBL controller, UniversalGcodeSender..
- Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
- Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Check StockRATTMMOTOR CNC Router Spindle Motor 220V 2.2KW Square Air Cooled Spindle Motor ER20 4 Bearings 3-Phase 24000RPM 6A 400Hz for CNC Router Engraver Milling Cutting Machine
- 【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ,....
- 【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than....
- 【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin....
- 【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be....
- 【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving..
Check StockCNCTOPBAOS 3 Axis GRBL 1.1f USB Port CNC Engraving Machine Control Board CNC Router Engraver Milling Machine Controller Board
- ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board.
- ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
- ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
- Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
- ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
- ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
Check Stock
