Reviews Pcb Spindle

DAEDALUS CNC Router Machine 3018 Max, 3 Axis, 200w Spindle, All Aluminum Frame

  • ★Pre-assembled module, all aluminum frame and spindle holder with the lead screws, guide rods..
  • ★Designed to use GRBL1.1 firmware, support PC control and offline control..
  • ★Offline controller, control without computer, a great convenience and a space saver..
  • ★Max travel of X/Y/Z Axis, 300 x 180 x 45 mm. Spindle, 200w, 12000RPM. T8 lead screw, 2mm pitch..
  • ★Good at cutting strong wood(oak, pine, poplar), acrylic,plastic,PCB and aluminum..
Check Stock

Milling Machine

  • 4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle....
  • Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe.....
  • It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and....
  • Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on....
  • Easy assembly. Main parts are pre-assembled, it only takes 15-30mins to fully assembly. Wires are labeled clearly for fast connection and bundled into....
Check Stock

500W CNC Router Machine, MYSWEETY 3 Axis 4540 CNC Metal Engraving Milling Machine for Carving Cutting Wood Acrylic MDF PCB Plastic, Working Area: 430*390*90mm(16.9*15.4*3.5inch)

  • 【500W Spindle & High Speed】 The upgraded 3-axis 4540 engraving machine is equipped with an 500W spindle for more power and higher efficiency, making it possible to cut stainless steel, aluminum and other metals. The maximum movement speed can reach 5000mm/min, the spindle speed range is 0-11000rpm/min.
  • 【Larger Working Area】 The cnc router machine has a larger engraving area, increased to 430*390*90 mm(16.9*15.4*3.5inch). The working table has precise scale lines, which is convenient for you to locate and measure the engraving material size.
  • 【Wide Application & Compatibility】 The CNC wood machine is compatible with GRBL software and supports systems such as Windows XP/7/8/10 and Mac OS. Suitable for engraving and carving stainless steel, wood, aluminum, brass, plexiglass, leather, PCB, MDF, acrylic, resin, nylon, carbon fiber, PCB, PVC, etc.
  • 【Easy to Assemble】 This CNC wood carving machine could be assembled in 15-30 minutes. The main components are already pre-assembled. Wires are clearly labeled for quick connection. The control board, power supply, emergency stop, and wires are integrated into a newly designed box for easy and safe operation. You just need several installation steps and wiring to start carving your projects.
Check Stock

KOOMEDA Mini Milling Machine Worktable, Compound Drilling Slide Table, Multifunction Worktable, Drill Vise Fixture Adjustment Worktable for Bench Drill

  • ♞【User Manual&GRBL Software】Our parcel include the CD,it include the installation instructions,user manual and GRBL software.
  • ♞【CNC 1310】 Working area:126mm*88mm*38mm / Machine Dimension: 281mm*281mm*287.5mm /Control Software: Grblcontrol / Lite.fire/Benbox. / Power Supply: DC24V adapter (input: 110VAC-240VAC) / Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min / Spindle Chuck: ER11 / Stepper Motor: 2-Phase 4-Wire Stepper Motors (1.3A 0.25N.m).
  • ♞【Wide Application】Suitable for carve/engrave plastic, wood, acrylic, pvc, pcb,bamboo,MDF and silimar materials engraving/cutting,as well as copper, aluminum, and other kinds of soft metal materials..
  • ♞【Supported System】Windows XP / Win 7 / Win 8 / Win 10..
  • ♞【Professional Team】Please let us know if you need any help about the machine.AND please let us know if you fail to install the CH340 driver on Windows 10..
Check Stock

Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm

  • This bundle includes a FoxAlien Masuter cnc router machine and the 300W spindle upgrade kit..
  • The Masuter cnc router supports upgrade to 300W spindle, which is more powerful. It can improve the engraving efficiency..
  • Masuter 4040 is a cost-effective CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”)..
  • The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It also supports add-ons such as offline controller, 300W spindle and laser modules. (Add-ons sold separately).
  • Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic, foam, resin, nylon, PCB, and aluminum etc..
Check Stock

CNCTOPBAOS 3 Axis 1310 CNC Router Kit for Metal Cutting Carving,GRBL Offline Controller,USB Mini Desktop Milling Machine for Aluminum Wood Copper PCB Engraving Machine

  • .../cutting,as well as copper, aluminum, and other kinds of soft metal materials..
  • ♞【CNC 1310】 Working area:126mm*88mm*38mm / Machine Dimension: 281mm*281mm*287.5mm /Control Software: Grblcontrol / Lite.fire/Benbox. / Power Supply: DC24V adapter (input: 110VAC-240VAC) / Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min / Spindle Chuck: ER11 / Stepper Motor: 2-Phase 4-Wire Stepper Motors (1.3A 0.25N.m).
  • ♞【Offline Controller】Main advantages: 1,can operate without connect the computer.
  • 2,Support SD card and TF card at the same time, standard capacity 1G. can write into the root directory G-code files or NC file.
  • Support Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle..
Check Stock

CNCTOPBAOS 3 Axis Desktop DIY Mini CNC 3018 Router Kit GRBL Control Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine Working Area 30x18x4.5cm

  • According to the instructions,the machine is easy to assemble..
  • ♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • Nema17 stepper motor 1.3A/0.25N.m/42x42x34mm.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module,you also can change ....
Check Stock

VEVOR CNC Machine 4 Axis CNC Router 3040 CNC Router Engraver Machine 500W CNC Router Engraving Drilling Milling Machine MACH3 with Usb Port for DIY Artwork Cutter 4 Axis,3040,500W

  • 【SPECIFIC PARAMETERS】- Working Area: 300x400x55mm (11.8"*7.9"*2.2") Work table dimension 610*450*390mm (24.0"*17.7"*15.4"), Total Power: 500W, Spindle Motor Power:300W DC Spindle Motor.
  • 【DURABLE QUALITY】- Equipped with an aluminum backing plate, this CNC machine is more steady and solid. The chrome shafts are not easy to deform, designed aluminum dust-proof plate for easy cleaning, and suitable for long time use..
  • 【STRONG COMPATIBILITY】- Can be controlled by computer for more precise engraving control. Replace the traditional parallel Interface with USB, suitable for desktop and laptop computers. And compatible with more operating systems(WINDOWS 2000 / XP, WIN7, WIN8, WIN10)..
  • 【HIGH TORQUE TRANSMISSION】- Flexible coupling can be used for high torque transmission. Cover plates greatly reduce the pollution for the screws and shafts. Spindle motor knob can be useful for small positioning adjustment, providing precise engraving..
  • 【MULTIPLE APPLICATION】- Engraving Machine is perfect for the engraving of soft materials such as plastic, wood, acrylic, PVC, PCB, MDF board, advertising signs, etc..
Check Stock

MYSWEETY 2 in 1 5500mW CNC 3018Pro-M Engraver Machine, GRBL Control 3 Axis DIY CNC Router with 5.5W Module Kit, Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller

  • ...the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
  • Come with 5.5W 5500mW module - Can be carved wood, bamboo, paper, leather, flammable plastic, PCB, PVC, acrylic(Only suitable for spindle milling cutter engraving). Can not work on metal, iron, glass, 201/304 stainless steel, jewelry, aluminum or silver..
  • Large Working Area- With an effective engraving area of 300 x 180 x 45 mm (11.8 x 7.1 x 1.8), the 3018pro-M can easily accommodate most projects. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • New Control Board- Integrated driver chip + fixed heat sink + external fan + sturdy casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty. It come with the spindle motor and 5.5W module on Z axis. If you use the spindle, please remove the module..
  • Simple Assembly- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

CNCTOPBAOS 1310 CNC Router Machine for Metal Carving,DIY Mini Desktop Benbox/GRBL Control Milling Machine for Aluminum,Copper,PVC,PCB,Acrylic,Wood Cutting Engraving Machine

  • ♞【User Manual&GRBL Software】Our parcel include the CD,it include the installation instructions,user manual and GRBL software.
  • ♞【CNC 1310】 Working area:126mm*88mm*38mm / Machine Dimension: 281mm*281mm*287.5mm /Control Software: Grblcontrol / Lite.fire/Benbox. / Power Supply: DC24V adapter (input: 110VAC-240VAC) / Spindle Motor: 775 spindle motor (12-36V), 24V 8000r/min / Spindle Chuck: ER11 / Stepper Motor: 2-Phase 4-Wire Stepper Motors (1.3A 0.25N.m).
  • ♞【Wide Application】Suitable for carve/engrave plastic, wood, acrylic, pvc, pcb,bamboo,MDF and silimar materials engraving/cutting,as well as copper, aluminum, and other kinds of soft metal materials..
  • ♞【Supported System】Windows XP / Win 7 / Win 8 / Win 10..
  • ♞【Professional Team】Please let us know if you need any help about the machine.AND please let us know if you fail to install the CH340 driver on Windows 10..
Check Stock