Reviews Spindle Bearings

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Road Bike Pedals - Built-in 3 Bearings,Aluminum Alloy Antiskid Durable 9/16\ Lightweight Carbon Fiber Sealed Bearing Flat Pedals (Black)

  • 【LIGHTWEIGHT & WIDE PLATFORM】Built-in 3 bearings,carbon fiber bushing outside of the spindle makes it more durable and anti-corrosion.Only 282 g(0.62lbs) each pair, the dimension of bicycle platform is 10*9.3*2.0 cm (3.9"*3.6"*0.8"), 114 mm wide platform pedals support the foot more steady during cycling, provide a more comfortable riding experience for you..
  • 【Traction Pin for Better Grip】12 Anti-skid pins : Antiskid nail surface, strong grasps, no longer skid, to ensure that the rider safety. and easier to move or replace which provide better traction and grip when cycling..
  • 【Fully Sealed Bearing 】In the form of O-rings to resist moisture or grit entering the bearings or bushes, fully sealed bearing pedals prevent dust or other damage when cycling for better clearance and stability.The spindle composite of chrome-molybdenum steel material, carbon fiber bushing outside of the spindle makes it more durable and anti-corrosion..
  • 【EASY TO INSTALL】Flat pedal with standard 9/16" threads diameter 14.3mm，Using hexagon installation and removal..
  • For Road Bike Pedals 3 Bearings Carbon Fiber Bicycle Platform Pedals Non-Slip 9/16".
Check Stock

Doubleshot 2 Black & Raw / Blue Spring

  • ...TAIN BIKE PEDAL - Choose to ride flat (no cleats) or clipped in. The Double Shot gives you the best of both worlds allowing you to chose how to ride. Headed for a long commute? Clip in and maximize your efficiency! Headed around the corner to grab some lunch? Keep those flip flops on and ride the flat side..
  • PREMIUM BEARINGS AND SEALS - Exclusive Igus LL-Glide Bearings, Enduro Cartridge Bearings, and Double Seals deliver industry leading quality and reliability..
  • STRONG AND LIGHTWEIGHT - Aluminum and Stainless construction, diamond plate pads for traction, and superior mud shedding. Weighs just 395g which is comparible with the popular Shimano A530.
  • FULL SPECS - Spindle = Forged 435 Chromoly Steel, Body = A380 Aluminum, Wing = 17-4PH Stainless, Spring = 300 Series Stainless, Release Angle = 15 / 20 degrees.
  • HYBRID, COMMUTER, MOUNTAIN BIKE PEDAL - Choose to ride flat (no cleats) or clipped in. The Double Shot gives you the best of both worlds allowing you to chose how to ride. Headed for a long commute? Clip in and maximize your efficiency! Headed around the corner to grab some lunch? Keep those flip flops on and ride the flat side..
  • PREMIUM BEARINGS AND SEALS - Exclusive Igus LL-Glide Bearings, Enduro Cartridge Bearings, and Double Seals deliver industry ....
Check Stock

Wellgo MG-1 Magnesium Sealed Platform Pedal, 9/16-Inch, Black

  • 【3 Sealed Bearings Pedals】: Each bike pedal has 3 sealed bearings with dustproof caps, it well help protect spindle from water and dust, and avoid noise, rust etc problems. The sealed bearings reduces rotational resistance, improving the conversion efficiency, makes it smoother while you pedaling and comfort riding on the road..
  • 【Sturdy & Durable】: Tempered Cr-Mo steel axle, the high-standard 5 tempering process will makes the spindle have a stronger hardness, it greatly reduces the risk of breakage when factor even in extreme riding, has a higher safety. CNC aluminum alloy pedal body, with anodic oxidation process for improved durability and corrosion resistance. And you will get a all-around stronger bike pedals with load bearing capacity. And alloy pedals lasts 5-10 times longer than other plastic or nylon pedals..
  • 【Anti-Skid Nails Design】: There are 6 stainless steel anti-skid nails on the each side and it offers plenty of grip and stability, it will make your shoes grips better and effectively prevent your shoes sliding off，which makes your ride easy and safely..
  • 【Ultra-light】: Flat size:79(L)*105(W)mm, 130/each only. Thin body and lightweight are the most outstanding features of this MTB pedals, more comfortable pedal, maximize i....
Check Stock

JET J-2530 15-Inch Benchtop Drill Press 3/4-HP 115V 1PH 354401

  • VERSATILITY: 16-speed motor turns spindle 200 to 3,630 RPM.
  • MAXIMUM SUPPORT: Large ground steel column.
  • ACCURACY: 1-7/8" diameter quill travels 3-1/8" for deep hole applications.
  • PRECISION: The enclosed spindle assembly is supported by four permanently-lubricated ball bearings.
Check Stock

Crankbrothers unisex-adult Doubleshot 2 Orange & Black / Orange Spring, Standard

  • ...TAIN BIKE PEDAL - Choose to ride flat (no cleats) or clipped in. The Double Shot gives you the best of both worlds allowing you to chose how to ride. Headed for a long commute? Clip in and maximize your efficiency! Headed around the corner to grab some lunch? Keep those flip flops on and ride the flat side..
  • PREMIUM BEARINGS AND SEALS - Exclusive Igus LL-Glide Bearings, Enduro Cartridge Bearings, and Double Seals deliver industry leading quality and reliability..
  • STRONG AND LIGHTWEIGHT - Aluminum and Stainless construction, diamond plate pads for traction, and superior mud shedding. Weighs just 395g which is comparible with the popular Shimano A530.
  • FULL SPECS - Spindle = Forged 435 Chromoly Steel, Body = A380 Aluminum, Wing = 17-4PH Stainless, Spring = 300 Series Stainless, Release Angle = 15 / 20 degrees.
  • HYBRID, COMMUTER, MOUNTAIN BIKE PEDAL - Choose to ride flat (no cleats) or clipped in. The Double Shot gives you the best of both worlds allowing you to chose how to ride. Headed for a long commute? Clip in and maximize your efficiency! Headed around the corner to grab some lunch? Keep those flip flops on and ride the flat side..
  • PREMIUM BEARINGS AND SEALS - Exclusive Igus LL-Glide Bearings, Enduro Cartridge Bearings, and Double Seals deliver industry ....
Check Stock

7k TK Trailer Axle - 7000 lb Electric Brake 8 Lug - TK | 75/58 (5'0) | 8x6.5 |

  • ✔️ [Part Number] - SP466 Trailer Axle Spindle.
  • ✔️ [Stub Diameter] - 2-1/4" (2.25") | 57.15 mm.
  • ✔️ [Fitment] - 5,200-7,000 lbs Trailer Axle E-Z lube Spindle #42.
  • ✔️ [Compatible Bearings] - Bearing sets: 25580/20, 14125A/14276.
  • ✔️ [Quantity in Package] - 2 Pack of Spindle #84.
Check Stock

CCIYU Mower Spindle Spindle Assembly fit for MTD for CUB CADET for TROY-BILT: 618-06977, 618-06977A, 918-06977, 918-06977A; for OREGON: 82-105; for STENS: 285-700

  • THE IMPORTANCE OF LAWN MOWER SPINDLE: Spindle Assemblies are crucial parts for your lawn mower cutting deck that work together with the pulleys and belts to perform clean and even mowing. The blades of your mower rotate around the spindles and if the spindles are bent or broken or if the bearings get worn down, your mower won’t operate as it should. Fortunately, you can replace the spindles or the spindle bearings yourself to fix your mower..
  • HOW TO STOP THE SPINDLE FROM MOVING WHEN TAKING LAWN MOWER BLADES OFF: Loosen the clamp on a blade removal tool by turning the handle counterclockwise. Place the removal tool over the end of the blade and the stopping edge over the side of the deck. Turn the handle clockwise to tighten it in place and prevent the spindle from turning..
  • PRECAUTIONS: Before you get to work replacing the spindle in your riding mower, you need to take several steps to ensure your safety. Park the mower on a level surface, set the parking brake and pull out the keys from the ignition..
  • REMIND: Please kindly check size information on the detail page to make sure it will fit yours before purchase..
Check Stock

Mophorn Spindle Motor 4KW Square Air Cooled Spindle Motor ER25 Collect 18000RPM 220V CNC Spindle Motor for CNC Router Engraving Milling Machine 4KW Air Cooled

  • Technical Parameters: Spec: φ3 x 13 in (Diameter: 7.5 cm x Length: 33.9 cm).
  • ER25 Standard Collet: The collet of the CNC router spindle is quenched with manganese steel, and the runout is less than 0.002mm, which has high....
  • Powerful Bearing: The air spindle motor adopts imported bearings with high accuracy, precision, and durability. Significantly improve the hardness and....
  • Low Noise & Heat Dissipation: The dynamic balance technology can effectively reduce the noise during use. The scientifically designed air cooling....
  • Wide Application: The CNC spindle motor kit is mainly used for engraving machines or frequency converters. It uses air circulation to cool the heat....
Check Stock