Reviews Solid State Relay 15a

SSR-100, DC-DC Solid State Relay 5-220V DC with Non-Contact Switch, SSR-100 DD

  • Control Method: The solid state relay uses DC-DC control method, which can provide stable performance..
  • Load Current: 100A, Load Voltage: 5-220VDC, Control Voltage: 3-32VDC, Control Current: DC: 5-50mA.
  • Installation: The solid state relay uses bolted installation method, easy to install and remove..
  • Heat Dissipation: The relay has pure aluminum heat sink base plate for fast heat dissipation..
  • Material: The solid state relay is made of thyristor and optoelectronic with non-contact switch..
Check Stock

Solid State Relay, 90 to 280VAC, 25A

  • Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
  • Model: XRE-1D4840 Solid State Relay 40A DC to AC..
  • Input voltage: 3-32V DC Output voltage: 24-480V AC.
  • Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
  • Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..
Check Stock

4pcs Solid State Relay SSR-25DA DC to AC Input 3-32VDC to Output 24-480VAC 25A 250V Solid State Relay Module

  • 【Model】SSR-25DA 25A 250V Solid State Relay Module.
  • 【SSR-25DA Parameter】solid state module relay SSR-25DA, 3-32VDC/24-480VAC.
  • 【Relay Size】(L*W*H)62×45×24mm/2.48 x 1.73 x 0.94".
  • 【SSR Application】No electric spark, no noise, high switching speed, especially suitable for corrosion, moisture, dust resistant and other harsh environments. Widely used in many automatic control systems.
  • 【Package Included】4pcs SSR-25DA solid state relay module.
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock

SainSmart 5V 2A 4 Channel Solid State Relay Module High Level Trigger Black for Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC

Check Stock

Solid State Relay SSR-40AA 40A AC to AC Input 80-250V AC and Output 24-380V AC (SSR-40 AA)

Check Stock

uxcell BEM-14840DA 3-32V DC to 24-480V AC 40A Output Single Phase SSR Solid State Relay

  • Total Size (Approx.) : 58 x 45 x 32mm / 2.3" x 1.8" x 1.26" (L*W*T).
Check Stock

Opto 22 DC60MP MP Model DC Control Solid State Relay, 60 VDC, 3 Amps, 4000 VRMS Isolation Voltage

  • Special attention: the current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-40DA Solid State Relay 40A DC to AC.
  • Input voltage: 3-32V DC Output voltage: 24-380V AC.
  • Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).
Check Stock

Baomain SSR-60DA 60A Solid State Relay Module 4-32VDC / 24-480VAC + Heat Sink

  • Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
  • Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
  • Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
  • This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
  • Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
Check Stock

TWTADE 2PCS SSR-25 DA 25A 3-32V DC / 24-380V AC SSR Single Phase Solid State Relay ssr-25da

  • Special attention: The current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-25DA Solid State Relay 25A DC to AC.
  • Input voltage: 3-32V DC Output voltage: 24-380V AC.
  • Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).
Check Stock