Reviews Slicer For Ender 3 Pro

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

  • Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
  • Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
  • Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
  • Precise Detection: Blue LED indicates normal filament feed-in.
  • Blue LED turns off when filament runs out..
  • IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
  • Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).
Check Stock

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro

  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X.
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X.
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform..
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..
Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

  • Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
  • Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
  • Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
  • Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
  • With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

Upgraded 4PCS Creality 3D Printer Aluminum Hand Twist Leveling Nut Hot Bed Die Springs for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/Pro, CR-10/ CR10S/10S Pro/ CR 20 3D Printer

  • Durablility: These leveling nuts are made of premium aluminium alloy, rust and corrosion resistance, which have a longer lifespan than your plastic nuts. these red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20..
  • Upgraded Design: Metal nut is more powerful and can be twisted more tightly than plastic nuts and the torque of these nuts is large, making it easier to fine tune the hot bed..
  • Compatility: Apply for 3D printer hot bed/ platform. these nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 plus/ 5 pro, CR-10, CR-10 V2, CR-10 max, CR 10, CR-10 mini, CR-10S, CR 10S Pro, CR-10 plus, CR-X, CR 20..
  • Note: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You have to cut the springs or adjust the hot bed height..
  • Professional Customer Support: If you have any problem or question ablout our product, please feel free to contact us. Our professional customer service team will assist you..
Check Stock

HICTOP Ender 3 Heater Cartridge 24V 40W for Creality Ender 3 Ender 3 Pro Ender 5 CR-10S Pro 3D Printer Prusa Mendel （Pack of 3）

  • ender 3 heater cartridge material : Stainless steel (304).
  • 24V heater cartridge voltage and power : 24V/40W..
  • Application of the 24v heater cartridge 40W: Creality ender 3, ender 3 Pro, ender 6 CR-10S Pro etc. 3D Printers Prusa Mendel.
  • Diameter of the ender 3 pro heater cartridge : 6mm. Length: 20mm,Wire Length:1M.
  • Temperature of the ender 3 V2 heater cartridge: It can take up to 280 ° C.
Check Stock

Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board

  • Creality new release silent motherboard V4.2.7 ，32bit, compatible with Ender 3..
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware..
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem..
  • Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play..
  • This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware..
Check Stock

Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch

  • Compatible With Creality Ender 3 Series 3D Printer - Creality Sprite extruder pro is compatible with creality Ender 3, creality Ender 3 v2, creality Ender 3 pro, creality Ender 3 s1, creality Ender 3 max, creality ender 3 s1 pro, creality ender 3 s1 plus 3d printer...
  • All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite m....
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
  • ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock