Reviews Single Side Pcb Board

Cermant 20PCS 15x18cm Bakelite Prototype Board PCB Printed Circuit Board for Soldering Electronics Project Experiment for Arduino DIY Electronics Experiments (5pcs 15x18cm)

  • Pcb prototype board, the proto boards are in the color of Red.
  • Material: 94HB Bakelite Prototyping Board.
  • FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on..
  • PACKAGE CONTENT - 5pcs x Universal PCB Board.
Check Stock

Zorveiio 50 Pcs PCB Board Mounting Feet with Screws, PCB Spacer Kit PCB Feet Plastic PCB Standoffs for Arcade Gaming Board Console Motherboard

  • 【Premium Material】Our pcb board mounting feet are made of high quality insulating plastics, which is sturdy, strong enough and durable in use. Such reliable plastic spacer can stay firmly on PCB Board, good insulation with long service life..
  • 【Pacakge & Suitable Size】 You will receive 50pcs L type pcb feet and 100pcs mounting screws (Each foot comes with 2 pieces screws). Each pcb standoff measures approx. 0.8" x 0.8"/21.2mm x 20.3mm, can secure the board tightly. Sufficient enough for you to satisfy using and replacing daily needs..
  • 【Widely Usage】Our plastic pcb feet are suitable for PCB packaging and stacking applications. Specially for fixing gaming boards, game console motherboard, video board, arcade gaming board ect and work well. Serve as ideal replacement hardware parts and offer you much convenience in your daily life..
  • 【Easy to install】 These pcb spacer kit is easy to install and use, you just need to tighten mounting screws in a breeze, will not need a lot of labor. It can secure the circuit board to other surfaces effortlessly..
  • 【100% Risk-Free Shopping】 Zorveiio's products are backed by incredible customer service to make sure your satisfaction is guaranteed. If you have any other questions about it, please do not hesitat....
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

WayinTop Electronics Component Fun Kit w/E-Book Upgraded Electronic Starter Kit with Breadboard Jumper Wires Kit PCB Soldering Kit LEDs & Resisitor Kit for Arduino/for Raspberry pi/ESP32/ESP8266

  • 【The Most Complete Electronic Starter Kit】The chosen components are the most complete mix to support a huge variety of projects. Including....
  • 【Breadboard Power Supply】The core module of the starter kit, which power through USB power cable or power by 9V 1A DC adapter. Lamp/digital....
  • 【Breadboard Jumper Wires Kit】Our kit comes with breaboard, power supply, pin header and also each type of jumper wires - ribbon cables / U-shape....
  • 【PCB Soldering Kit】Our kit also add single-sided PCB board, double-sided PCB board, solder wire, you can also learn how to solder running LEDs and....
  • 【Relaiable Technical Support】Detailed tutorials and datasets can be provided for free, please contact us at any time by email to get the eletronic....
Check Stock

Optical Laser Lens Head for Game Cube NGC Gamecube Replacement Repair Parts

  • Best ChoiceGreat replacement for your broken or defective DVD drive.Compatible with Nintendo Wii models.
  • Compatible WithComplete Unlocked D2A D2B D2C D2E DVD Drive For Original NINTENDO WII With PCB Board Already Installed (2 PCB Board)..
  • Plug-and-Play UnitHigh Quality DVD Drive Replacement Repair Part for Nintendo Wii . Please note:It can load DVD game ONLY. (cannot read DVD movies)..
  • Easy to InstallSuper easy to install, even kids can single install.Try-Wing Screwdriver Is Required To Open Up a Console..
  • Buy it Risk-FreeComes with 24 months quality warranty and 30 days money back.We will do everything we can to ensure you are COMPLETELY satisfied with your purchase. Refunds , exchanges and all. You are Guaranteed to be happy. If you meet any issues, please let us know. We are always available to help you..
Check Stock

DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects

  • 100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
  • 0.1" hole spacing for DIP integrated circuits and headers..
  • THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
  • MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
  • Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
  • THE FLEXIBILITY OF HAVINg CHOICES  ★  Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
  • PACKAGE COMPONENT  ★  40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
  • 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip

  • 【SMD 5050 LED Rope Lights】There are RGB color leds on 16.4ft flexible PCB board. You can control the rgb led tape color like as red/ green/ blue/....
  • 【IP65 Waterproof PCB】This 5M RGB length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more....
  • 【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier.(PS：Only one rgb led tape in the....
  • 【Perfect home decorations】You can install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back....
Check Stock

Wii Disc Drive Replacement Original DVD Drive ROM Disc DIY Replacement Repair Part Assembly OEM Plug and Play Unit Compatible for Nintendo WII Game Console D2C D3-2 DMS D2A D2B D2E

  • 【Best Choice】Great replacement for your broken or defective DVD drive.Compatible with Nintendo Wii models.
  • 【Compatible With】Complete Unlocked D2A D2B D2C D2E DVD Drive For Original NINTENDO WII With PCB Board Already Installed (Single PCB Board)..
  • 【Plug-and-Play Unit】High Quality DVD Drive Replacement Repair Part for Nintendo Wii . Please note:It can load DVD game ONLY. (cannot read DVD movies)..
  • 【Easy to Install】Super easy to install, even kids can single install.Try-Wing Screwdriver Is Required To Open Up a Console..
  • 【Buy it Risk-Free】Comes with 24 months quality warranty and 30 days money back.We will do everything we can to ensure you are COMPLETELY satisfied with your purchase. Refunds , exchanges and all. You are Guaranteed to be happy. If you meet any issues, please let us know. We are always available to help you..
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ... stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shaped PC....
Check Stock