Reviews Silicon Manganese

Life Extension Bone Restore 120 Capsules

  • Provides 700 milligrams of elemental calcium from three different forms, along with the critically important nutrients magnesium, boron, zinc, silicon, manganese and vitamin D3 needed for healthy bones.
  • Boron in this formula, called FruiteX B OsteoBoron, is a calcium/carbohydrate/boron complex, similar to what is found in fruits and vegetables.
  • Provides calcium in capsule form to ensure that it breaks down fully in the digestive tracts.
Check Stock

440C Stainless Steel Barstock for Knife Making - 3/16 x 1-1/2 x 12

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

440C Stainless Steel Barstock for Knife Making - 1/8 x 1-1/2 x 12

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

440C Stainless Steel Barstock for Knife Making - 1/8 x 1-1/4 x 12

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

Forney 42326 Copper Coated Brazing Rod 3/32-Inch-by-18-Inch 10-Rods

  • High strength alloy used for gas brazing low carbon and low alloy steels.
  • Used in applications require high tensile strength, greater than 45,000 psi.
  • High silicon and manganese content eliminates the need for flux.
  • Typical applications include low carbon and low alloy steels and sheets.
Check Stock

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
  • galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.
Check Stock

1 Pack 12″x2″x0.25″ 5160 Steel Flat Stock Bar Blade Billets Blanks Knife Making Forging, The Perfect Knife Making Steel for Professional & Hobbyist Use, Annealed High Carbon Steel for DIY Knife Making

  • 5160 is a very durable and tough alloy forging steel often used in making swords..
  • In addition to its iron, this steel contains 0.64% carbon, 0.9% chromium, 1% manganese, 0.35% silicon, with trace amounts of sulphur and phosphorus..
  • The addition of chromium and silicon make this steel excellent at holding an edge and able to handle a lot of use..
  • This is typically an oil quenched steel..
  • .25″ Thickness x 2″ Width x 1 Ft. Length.
Check Stock

1\ X 1\ Stainless Steel Square Bar, 304 General Purpose Plate, 6\ Length, Mill Stock, 1.0 inch Thick

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

1/4\ X 1\ Stainless Steel Flat Bar, 304 General Purpose Plate, 6\ Length, Mill Stock, 0.25 inch Thick

  • Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
  • High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
  • High strength, moderate corrosion resistance, and good hardness and wear resistance.
Check Stock

Narex 8 Piece Micro Mini Professional Detail Carving Chisels Set with 2 knives, 4 gouges, V Tool and straight chisel 869010

  • This professional 8 piece micro detail carving set is manufactured by tool maker in Czech Republic.
  • The set contains 2 knives, 4 gouges (2 half round, one shallow and on standard), straight and V ool.
  • Knife blades Manganese-Vanadium HRc 60-62.
  • Carving tools are chrome-silicon alloy steel 59HRc..
  • Handles are stained and waxed European beech wood..
Check Stock