Reviews Ferro Silicon Manganese

440C Stainless Steel Barstock for Knife Making - 1/4 x 2 x 12

Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
High strength, moderate corrosion resistance, and good hardness and wear resistance.

Provides 700 milligrams of elemental calcium from three different forms, along with the critically important nutrients magnesium, boron, zinc, silicon, manganese and vitamin D3 needed for healthy bones.
Boron in this formula, called FruiteX B OsteoBoron, is a calcium/carbohydrate/boron complex, similar to what is found in fruits and vegetables.
Provides calcium in capsule form to ensure that it breaks down fully in the digestive tracts.

Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
High strength, moderate corrosion resistance, and good hardness and wear resistance.

Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
High strength, moderate corrosion resistance, and good hardness and wear resistance.

Premium grade martensitic 440C Stainless Steel barstock for making knife blades.
High carbon alloy contains 17% chromium, 1.1% carbon, 1% manganese, 1% silicon, and 0.17% molybdenum.
High strength, moderate corrosion resistance, and good hardness and wear resistance.

Each of FERROFIRE Ferro Rods is soft enough to be scraped into small curls of ferrocerium that can work great as magnesium to ignite a camping fire with more ease, you will no longer need to buy magnesium rod as tinder..
FERROFIRE branded premium ferro rods are second to none with its stable quality, higher ignition rate, less smoke, each FERROFIRE ferro rod is perfect fire starter for bushcraft, hiking, survival, emergency, camping, fishing and prep purpose..
A premium flint steel rod made by FEFFOFIRE doesn’t need to too long, you can generate much more hot sparks shower at 5,500F (3,000C) temperature with a FERROFIRE fire steel, ferrocerium, ferro rod..
Carbon steel ferro rod striker scraper made by FERROFIRE can easily make sparks shower together with FERROFIRE ferro rods, it’s a perfect mate of fire starting kit, light a camping fire anywhere, any weather condition will no longer stop your passion of bushcraft!.
Should you meet any issue after order FERROFIRE product, please contact FERROFIRE customer support, you will have a prompt remedy action from FERROFIRE, trust us, you will never be disappointed..

FERROFIRE flint toggles with 2 lanyard holes are mate for bushcraft man as an EDC gear to start a camping fire in emergency..
These top quality drilled ferrocerium rods fire steel can be used to generate adequate sparks..
Each FERROFIRE branded premium flint rod’s sparks have temperature up to 5,500F (3,000C) temperature, ignites dry leaves, wood chips with few minutes..
You can use FERROFIRE branded Carbide Steel Striker to light a fire..
FERROFIRE branded 5/16″ x 1″ drilled ferro rods are perfect mate of your discovery, wherever you are they are with you..
Each of FERROFIRE Ferro Rods is soft enough to be scraped into small curls of ferrocerium that can work great as magnesium to ignite a camping fire with more ease, you will no longer need to buy magnesium rod as tinder..
FERROFIRE branded premium ferro rods are second to none with its stable quality, higher ignition rate, less smoke, each FERROFIRE ferro rod is perfect fire starter for bushcraft, hiking, survival, emergency, camping, fishing and prep purpose..
A premium flint steel rod made by FEFFOFIRE doesn’t need to too long, you can generate much more hot sparks shower at 5,500F (3,000C) temperature with a FERROFIRE fire steel, ferrocerium, ferro rod..

LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.

5160 is a very durable and tough alloy forging steel often used in making swords..
In addition to its iron, this steel contains 0.64% carbon, 0.9% chromium, 1% manganese, 0.35% silicon, with trace amounts of sulphur and phosphorus..
The addition of chromium and silicon make this steel excellent at holding an edge and able to handle a lot of use..
This is typically an oil quenched steel..
.25″ Thickness x 2″ Width x 1 Ft. Length.