Reviews Silicon Bronze Lag Screw

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

  • Allows for lag screw bolts to be installed into concrete, brick and block.
  • Inserts into a hole by tapping with a hammer until flush.
  • Lag screw expands the lag shield against the walls of the hole.
  • Drill hole with masonry drill bit based on diameter on anchor.
Check Stock

Hard-to-Find Fastener 014973269470 Lag Expansion Shields, 1/4 Short, Piece-12

  • Expansion shield anchors for use with lag screws are designed to anchor into concrete, brick, and block..
  • Expansion shield anchors consist of pre-assembled two-part expansion shields..
  • These anchors expand as a lag screw is fastened through the anchor..
  • These anchors feature very precise tapered internal threading to permit easy turning of the lag screw..
  • Zinc plating adds a layer of corrosion resistance to the anchors..
Check Stock

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

  • 1.【Premiun Material ＆ Mighty Grip】Heavy duty screw bolts are made from 304 stainless steel and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners.These lag bolts for wood is coarse threads for superior holding, will not strip off..
  • 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2"，3/8×2"，3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
  • Quantity: 60 pieces screws and washers in total (30 sets)..
  • 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber，and DIY design..
  • 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
  • Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
  • 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous ins....
Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....
Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

  • Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
  • Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
  • Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....
Check Stock

Canomo Light Fixture Cross Bar Kit Lighting Screw Collar Loop Kit Canopy Handware Set Antique Bronze

  • Canomo bronze finish screw collar loop canopy hardware set, There may be some differences in color due to different batches.
  • Can be used to hand an chandelier, to fix a light fixture, or rebuild and create table and pole lamps, all of the hardware has a good fit and finish..
  • Die cast screw collar loop, seats canopy with 1 1/16 Inch center hole.
  • Bronze finish screw collar loop kit, contains cross bar, loop & screws, fits canopies with a 1-1/16" center hole, Carded..
Check Stock

H-A Solid Brass Uplight Spotlight Fixture Landscape Outdoor Lighting Waterproof with Ground Spike Stand 12v Low Voltage

  • PrQualited Wire - 3ft (standard) UL SPT2-18AWG, ETL-listed, pre-wired with UL-listed direct burial copper wire emium Quality-Our landscape spotlight are made of solid brass, antique bronze finished, premium grade glass lens, IP54 protecting grade, offer much durability with waterproof and corrosion-resistant.
  • Suitable for wet locations. Well sealed from water, with double O-ring design and silicon plug at the bottom where the leads exit the fixture.
  • Adjustable Head - 270 degree adjustable head offers more possibility to meet various needs. Support LED MR16 5-7 watt bulb or Halogen MR16 25-35 watt, bulbs are not included.
  • Easy Installation - come with anti-corrosive ground spike, just screw them on to the spot light, then choose the position and insert the spike stand into the ground..
Check Stock

Century Drill & Tool 68700 Eye Lag Driver 1/4 Hex

  • Hardened steel body for professional Acoustic ceiling installs.
  • Easily drives eye lag screws into wood or metal with any drill or screw gun.
  • Compatible with all wood and self-tapping eye lag screws.
Check Stock

New Religion Money 2 M.D.O.T [Explicit]

  • PCIe Gen 3x4 interface with read speeds up to 2,200MB/s and write speeds up to 1,600MB/s.
  • The warranty terms on all of its SSDs are based on whether the warranty length or TBW limit occurs first..
  • To support a Silicon Power PCIe SSD, the system must have an M. 2 connector with only an M key. The Silicon Power PCIe SSD does not have a b notch and....
  • The custom screw should come with the motherboard or PC. Please acquire the screw from your motherboard or PC Manufacturer, if needed.
Check Stock