Reviews Sight Glass Flow Rate Meter Gauge

Parker L606-08W/M8 Lubricator, Zinc Bowl with Sight Gauge, Manual Drain, 350 scfm, 1\ NPT

Lubricator for pneumatic systems for proportional oil delivery over a wide range of air flows.
Precision needle valve for adjustment of delivery rate.
Metal bowl with sight gauge for checking fluid level.
High-flow port for a flow rate up to 350 scfm.

HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK.
250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE.
ADJUSTS 7 PSI TO 215 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT.
/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"..

Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
10 Micron Particulate Element / Flow Rate: 176 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 1/2" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.

Max. Supply Pressure: 250 PSI / Max. Operating Pressure: 0-150 PSI.
10 Micron Particulate Element / Flow Rate: 50 SCFM @ 90 PSI.
Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 3/8" NPT.
Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
Pressure Gauge, Bracket Included, 1 Year Manufacturers Warranty.

HIGH PERFORMANCE: All kinds of gas measurement accuracy is high, suitable for a variety of occasions, you can avoid the trouble caused by the reading error when you measure..
PRECISE: The air flow meter is simple, practical and easy to use. The transparent panel type makes the reading simple, convenient and clear..
CONVENIENT: Gas flow meter is an instrument for measuring gas rate of flow, which is installed in the pipeline to record the gas flow..
Texture of Material: The gauge consists of acrylic, plastic and metal. Lightweight and durable, suitable for long-term use..

HEAVY DUTY 3/4" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK..
175 PSI MAX PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED. PLEASE NOTE: 3/4" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.05"..
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE..
ADJUSTS 7 PSI TO 175 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT..
REPLACEMENT FILTER ELEMENT ASIN B01N7VEJ2V. COPY PASTE ASIN TO YOUR AMAZON SEARCH BAR..

3/4" Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo.
Brand new in line compressed air moisture filter, regulator, lubricator combo. This is a high quality unit that gives you the power to keep moisture out of your air lines, regulate air pressure, and lubricate your air lines all at once!.
This has 3/4" female NPT input as well as a 3/4" female NPT output port. This assembly has a 140 CFM max flow rate and comes equipped with a pressure gauge..
You can adjust the regulated pressure between 7 - 160 PSI with a 225PSI max PSI. The moisture filter features a 5 micron filter, 2.7 oz bowl capacity, as well as a visual sight glass to easily monitor the moisture level..

Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..

HEAVY DUTY 1/2" FEMALE NPT IN LINE COMPRESSED AIR FILTER REGULATOR PIGGY BACK..
250 PSI MAX INPUT PRESSURE, 215 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED. PLEASE NOTE: 1/2" NPT OUTSIDE THREAD DIAMETER IN INCHES 0.840"..
5 OUNCE METAL BOWL WITH VISIBLE SIGHT GLASS, 140 SCFM FLOW RATE..
ADJUSTS 7 PSI TO 215 PSI, HIGH IMPACT LOCKING COMPOSITE KNOB, 5 MICRON FILTER ELEMENT..
REPLACEMENT FILTER ELEMENT AMAZON ASIN B01N6U4LSE. COPY PASTE ASIN TO YOUR AMAZON SEARCH BAR..

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..