Reviews Screw And Nut Kit

NINDEJIN 910pcs M3 Male Female Hex Brass Standoff Spacer with Pan Head Screw Nut and Washer Assortment Kit PCB Motherboard Standoff Screw Nut Assorted Kit

  • [Hex Brass Standoff Spacer Assorted Kit]: This kit includes male to female, female to female hex brass standoff spacer, with pan head screw, hex nut, washer, it's convenient for your electronics working, such as printed circuit board and motherboard..
  • [Quality of Standoff Screws]: Standoff spacers are made of brass, screw, nut and washers are nickel-plated, have good corrosion resistance and are passivated for enhanced protection. They may be mildly magnetic. The flat sides of the hex ensure a firm grip when tightening with a wrench..
  • [Motherboard Standoff Screw Using]: In electronics, they are frequently used to raise a printed-circuit board above a surface. Standoffs are ideal fasteners for keeping printed circuit boards both stationary and elevated away from surfaces, such as the interior of a computer chassis..
  • [Standoff Screw Nut Assorted Kit Package ]: Included Male-female, Female-female series, Hex nuts, and flat washers. These fasteners stored in a transparent plastic box, convenient for your storage and use..
  • [NINDEJIN After-sales Service]: If you have any problems with NINDEJIN screws assortment kit, please contact us by email or Q&A, we will give you a professional service and reply to you within 24 hours. We will provide Lifetime technical su....
Check Stock

YESKING 50-Piece Bolt Extractors Screw Extractor Set, Easy Out Bolt Extractor Set Stripped Screw Remover and Drill Bits for Removing Broken Studs,Frozen,Rounded-Off Bolts

  • 【50-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 4-in-1 screw & nut remover kit and drill bit kit.It contains 13pcs multi-spline screw extractors, 16pcs left hand HSS drill bits, 6pcs spiral screw extractors,13pcs nut removers,1pcs extension bar and 1pcs ratchet wrench.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. ....
Check Stock

Powerbuilt Harmonic Balancer Puller and Installer Tool Set, Install and Remove Kit, Cars and Light Trucks, Storage Case - 648637

  • Strong and dependable enough to last a lifetime.
  • Kit services: many automobiles and light trucks.
  • Tool set for removal and installation of harmonic balancers that have threaded holes.
  • Removal pieces: combo yoke, national fine center screw, center point piece and bolt pairs.
  • Installation pieces: national fine center screw, thrust bearing, forcing nut and jaw nut.
  • Adapters included: M12-1.5, M14-1.5, M16-2.0, 7/16-Inch-20, 1/2-Inch-20, 9/16-Inch-18 and 3/416.
  • Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.
Check Stock

Topec 29 Piece Bolt Extractor and Drill Bit Set, Multi-spline screw extractors, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws(29PCS)

  • 【29-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit. It contains 9pcs nut removers, 10pcs left hand HSS drill bits, 10pcs multi-spline screw extractors. Multiple specifications and sizes to meet your various work needs..
  • 【EXACT SIZE】: Screw remover kit parts have clear specifications printed on them, 9pcs nut removers size: 3/4” (19mm), 11/16”, 5/8”(16mm), 9/16”(14mm), 1/2”, 7/16”(11mm), 3/8”, 5/16”(8mm), 1/4”. 10pcs drill bit size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8". 10pcs multi-spline screw extractors size: 13/32", 3/8", 11/32", 5/16", 9/32", 1/4", 7/32", 3/16", 5/32", 1/8"..
  • 【HIGH QUALITY】: The nut remover/multi-spline screw extractor are made of high hardness chrome-molybdenum steel. Reverse spiral groove design bending down to provide maximum grip force to easily remove damaged bolts, nuts, broken screws. The left hand drill is made of HHS and the head is designed with a 135° angle. which is not easily worn and has strong penetration. Surfa....
Check Stock

BIQU 300mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ☘️【Material】Our stainless steel adopt high quality stainless steel, this lead screw is rust and corrosive resistant, durable and stable..
  • ☘️【Smooth Movement】It has low friction that helps the nut move smoothly on the lead screw. It also helps the lead screw work precise and accurate..
  • ☘️【T8 Brass Nut】 There are 4 holes on the T8 brass nut which can easy to fix to the machine..
  • ☘️【Bearing Pillow Block】Bearing Pillow Block have a certain bearing capacity, can hold in ordinary precision rack, strong adaptability, and widely applied..
  • ☘️【Widely Usage】 T8 lead screw can cover a wide usage in 3D printer, stepper motor and CNC 3D engraving machine and other DIY kit..
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • ...s not installed and is the most simplistic bolt-on installation using simple hand tools.
  • Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
  • This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
  • Will not fit with accessory Saddlebag Guard Rails P/N 90200561.
Check Stock

M.2 Screw Kit,NVMe Screw m.2 SSD Mounting Kit，Compatible ASUS Motherboard

  • M.2 Standoff and Screw for motherboard NGFF/NVMe Kit，Screw specification M2*3 (mm).
  • compatible Asus13020 M.2 SSD Mounting Kit Standoff + Screws for Motherboard ..
  • M.2 Screw + Screw Hex Nut Stand Off for motherboard NGFF.
  • Application: Perfect for universally laptop notebook repair, applied in electronics, computers, PC board, DIY hobby etc..
  • Package Content:Hex head jackscrews*4、Flat head Screws*4、Transparent screw washers*4、Screwdriver*1.
Check Stock

XJX Screw-Extractor Set | Easy Out Bolt Extractor Set | Multispline and Spiral Extractor Set | Perfect for Stripped Screws, Studs, Fittings, and Lugs, Left-Hand Drill Bits | 1/8" to 13/32"（25-Piece）

  • 【25-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit.It contains 10pcs multi-spline screw extractors, 10pcs left hand HSS drill bits, 5pcs spiral screw extractors.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. Easily remove damaged bolts, nuts and screws even if they are ....
Check Stock

250mm Ball Screw SFU1204 Diameter 12mm,4mm Pitch with Metal Ball Screw Nut for CNC Machine

  • End Machined ballscrew SFU1204-250mm L with nut+BK10/BF10+Ball nut Housing+Coupler.
  • 【FINE WORKMANSHIP】The ball screw is made of high-quality and durable steel that is wear-proof and resistant to high temperatures. Compact design and easy to mount and dismount..
  • 【LOW FRICTION】The part bears very little sliding friction between the nut and screw, and therefore longer service life..
  • 【HIGH MECHANICAL EFFICIENCY】No stick-slip effect.
  • 【MUTE OPERATION】The ball screw kit features an accuracy grade of C7 with bearing fits less than 0.03 mm, making little noise while running,more accurate positioning..
Check Stock

Ewead,200mm Length 8mm Dia Silver Vertical 2mm Lead Screw Rod & Pillow Block Mounted Bearing T8 Lead Screw Kit for 3D Printer Set of 6

  • ☘️【Material】Our stainless steel adopt high quality stainless steel, this lead screw is rust and corrosive resistant, durable and stable..
  • ☘️【Smooth Movement】It has low friction that helps the nut move smoothly on the lead screw. It also helps the lead screw work precise and accurate..
  • ☘️【T8 Brass Nut】 There are 4 holes on the T8 brass nut which can easy to fix to the machine..
  • ☘️【Bearing Pillow Block】Bearing Pillow Block have a certain bearing capacity, can hold in ordinary precision rack, strong adaptability, and widely applied..
  • ☘️【Widely Usage】 T8 lead screw can cover a wide usage in 3D printer, stepper motor and CNC 3D engraving machine and other DIY kit..
Check Stock