Reviews Schlage Connect Z Wave Not Working

NEO Z-Wave Plus Smart Mini Power Plug Z Wave Outlet with Smart Energy Monitor Home Automation, Work with Wink, SmartThings, Vera & more, Blue 2 Pack

  • OVERLOAD REMIND SAFETY GUARD: If the load current is greater than the maximum current, the device will send a signal to the smartphone through the gateway to remind the user of the power consumption and prent the fired hazard..
  • SMART PLUG SMART LIFE: The most universal smart home devices. To connect the smart plug to Z-wave network with gateway, through the Smartphone App you can remote control your home appliances anytime, anywhere. Any detected use of energy can prompt the system to immediately send a notification to your smartphone..
  • SMART HOME FULL GUARD: Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway. Enjoy your smart home with the smart plug. Automate your home to provide you with the highest possible level of comfort and security..
  • Z-WAVE TECHNOLOGY: Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. e.g. SmartThings, Fibaro, Vera, Zipato, HomeSeer, Iris and Aeote..
Check Stock

NEO Z-Wave Plus Smart Mini Power Plug Z Wave Outlet with Smart Energy Monitor Home Automation, Work with Wink, SmartThings, Vera & more, Green 2 PK

  • ...RLOAD REMIND SAFETY GUARD: Overvoltage protection. If the load current is greater than the maximum current, the device will send a signal to the smartphone through the gateway to remind the user of the power consumption and prent the fired hazard..
  • ◆ SMART PLUG SMART LIFE: The most universal smart home devices. To connect the smart plug to Z-wave network with gateway, through the Smartphone App you can remote control your home appliances anytime, anywhere. Any detected use of energy can prompt the system to immediately send a notification to your smartphone..
  • ◆ SMART HOME FULL GUARD: Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway. Enjoy your smart home with the smart plug. Automate your home to provide you with the highest possible level of comfort and security..
  • ◆ Z-WAVE TECHNOLOGY: Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. e.g. SmartThings, Fibaro, Vera, Zipato, HomeSeer, Iris and Aeote..
Check Stock

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • 2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do....
Check Stock

GE 12729 Z-Wave Wireless Lighting Control Smart Dimmer Toggle Switch, White

  • "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
  • Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day..
  • Easily replace any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting On/Off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes..
  • Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).
Check Stock

Minoston Z-Wave Plug 700 Plug-in Outlet Built-in Repeater Range Extender, Z-Wave Hub Required, Alexa and Google Assistant Compatible(MP31Z)

  • This Z-Wave plug is compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Z-Wave plug in outlet is 15A Max Loading for using with most of home lighting devices and home appliances..
  • Timer schedule: Control lights to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Z-Wave 700 series chip for Smart Start and for most of Z-Wave hubs..
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient smart outlet features..
Check Stock

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

  • POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!.
  • POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption..
  • POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure..
  • POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14 - 104F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle..
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and....
Check Stock

Minoston Z-Wave Plug with Energy Monitor, 700 Z-Wave Outlet Switch, Z-Wave hub Required, Work with SmartThings, Wink, Vera(MP31ZP)

  • This Z-Wave smart plug is compatible with those Z-Wave hub: SmartThings, Vera, Fibaro, Homeseer. ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Energy Efficient: Z-Wave outlet comes equipped with energy monitoring capability. Monitor use and Save on bills. Enjoy a more efficient home..
  • Timer schedule: Control lights and application to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
  • Wireless control: A large range of types of load are supported to be wirelessly controlled like lamps or small appliances from anywhere and any time by your mobile devices. Home automation is from a little Z-Wave Plug to control small appliances that you want. Overcurrent protection, when the loading is over 15A, the device wil turn off!.
  • Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. Space-saving design leaves the top second outlet free for continued use. Z-Wave Frequency: 908.42MHz..
Check Stock

Minoston Z-Wave Outdoor Dimmer Plug, Outdoor Smart Outlet Switch, Z-Wave Hub Required, Weatherproof, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22ZD)

  • This Z-Wave outdoor dimmer plug compatible with those Z-Wave hub: SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, Honeywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • 0-100% Dimming and Voice Control: This Z-Wave outdoor dimmer for string lights can adjust the light brightness from 0-100% by voice commands. Just say:“Hey Alexa, set the led strip lights to 75%”..
  • Ideal for Outdoor: IP65 weatherproof housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that the Z-Wave plug can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • 400W Max Power Z-Wave Dimmer Plug: The Z-Wave plug-in smart dimmer plug works with dimmable string lights in LED, INC bulb. Please make sure your string lights are dimmable and the total power is less than 400W. 150W Max for....
Check Stock

GE 45603 Z-Wave Technology Wireless Lighting Control Fluorescent Light & Appliance Module

  • The switch enables you to wirelessly control to turn lights on and off, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day..
  • Features one always-on pass-through AC outlet and one Z-Wave enabled outlet..
  • Space-efficient, side-plug design does not block lower outlet or obstruct placement of furniture..
  • Easily control lighting with your mobile device or computer using any Z-Wave certified gateway, or control lighting on location with the manual push-button control or a Z-Wave certified remote..
  • Compatible with the following Z-Wave certified Hubs: SmartThings, Pulse, Trane, Wink, Alexa, Nexia, Honeywell, HomeSeer, Smart Security, Harmony, Vera, Connect, Iris. Works with Amazon Alexa and Google Home..
Check Stock

ZRC-90US, BW8510US, by Remotec, Cert ID: ZC10-15100007

  • MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub..
  • 4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click..
  • DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest ....
Check Stock