Reviews Saw Guide Clamp

Bora 36 Wtx Modular Clamp Edge w/ruler 545036

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

Bora 24 WTX Modular Clamp Edge w/ruler 545024

  • Made of heavy-gauge, extruded aluminum for extreme durability.
  • Adjustable clamp end slides easily up and down saw guide to fit material to be cut.
  • Locking handle grabs work surfaces for a secure edge that won't budge.
  • Ruled extrusion allows for easy measurements.
  • Fits with the Bora router guide, saw guide, and jig saw guide.
  • Cut a wide variety of angles with the WTX Track Clamps.
  • Easy to increase length with extension accessories.
Check Stock

BORA 50” NGX Clamp Edge Straight Cut Guide for Circular Saws Easy to Use Great for Cross-Cutting Plywood Sheets and Routing Dados 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.
Check Stock

Bora WTX 50-Inch Ruled Clamp Edge and Jigsaw Guide Set, 545059K

  • Jig saw guide is fully adjustable to accommodate most jig saws.
  • Adjustable pointer guide keeps your cuts true.
  • Clamp Edge includes ruled edge for easy measuring.
  • Easy to change from cutting with the Clamp Edge guide to cutting freehand.
  • Clamp Edge made of heavy-gauge, extruded aluminum for extreme durability.
Check Stock

Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY Guide for Circular Saws 100 Inch Cutting Length 545100

  • Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length....
  • Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle....
  • Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and....
  • Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX....
  • Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the....
Check Stock

260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail

  • EXCELLENT FEATURES: Designed to have standard right angle, this circular saw guide rail ensures higher accuracy for woodworking. Circular saw guide rail system can quickly and accurately set the slicing or milling angle, which can make precise and repeatable 90 degree cuts with the guide rail, no need to readjust, you can use it for daily use or work, which can give you for a perfect experience..
  • UNIQUE DESIGN: 90 degree saw guide for circular saw has a hollow design, light in weight and compact in size, both the daily storage and carrying are very convenient..
  • DURABLE MATERIAL: 340mm track saw square right angle is made of high-quality aluminum alloy and stainless steel material, which has a stable structure and is not easy to damage and bend, rustproof and durable for long term use..
  • EASY TO INSTALL: 340mm right angle circular saw guide rail is easy to use, with simple installation and removal steps, you can complete the installation in just a few steps, whether you are a professional woodworker or a beginner, electric circular saw track is essential..
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill..
  • CONTRACTOR’S COMPANION - This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools..
  • LOCKED IN - The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge..
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts..
Check Stock

BORA 50 NGX Clamp Edge Extension Straight Cut Guide for Circular Saws | Add 50-Inches to Your NGX Clamp Edge 544060

  • Fits into NGX Clamp edge saw guide to increase length by 50 inches.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • Adds 50-inches to your existing NGX clamp edge guide.
Check Stock

POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System, 5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack

  • INCLUDES: (2) quick screw down Clamps with 5-3/8" Max opening, 2-3/8" Throat depth.
  • PREMIUM DESIGN: features High quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood.
  • The steel pressure pads are completed with removable non marring plastic.
  • SUPERIOR CLAMPING FORCE: delivers consistently secure placement and safe Clamp action for a seamless workflow.
  • VERSATILITY: These rail clamps provide a portable clamping option for Festool, Makita, POWERTEC 71572/ 71573 track saw guide rails and similar sized track saw guides, perfect as MFT clamps for your homemade workbench, and fits in some heavy duty T-slots (see image for size).
  • PLEASE NOTE: The clamp ends have a specific profile, see the image for details. They are designed to work with MFT tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. They will not work in universal or ¼” t-track. Please check the size of your t-track to verify that the clamps will work for your application..
Check Stock