Reviews Sata Port Multiplier

Syba 16 Port SATA III to PCIe 3.0 x4 Non-RAID Expansion Card Quad ASM1064, SD-PEX40164

  • 6 SATA III ports with transfer speeds up to 6.0Gbps.
  • backward compatible with SATA I/II at 1.5/3.0Gbps.
  • PCIe x4 Lanes board. Support both UEFI and Legacy Boot ROM. Work with UEFI or Legacy BIOS motherboards..
  • Support SATA Command-based Port Multiplier switching and up to 30 SATA drives via six 5-port PM connections..
  • No driver installation is required on Windows 10/8/7/Vista, Server 2008 and later, Linux, Mac OS 10.x and later..
Check Stock

StarTech.com M.2 to SATA Adapter - Dual Slot - for 2.5in Drive Bay - RAID - M.2 SSD - M.2 Adapter - M.2 SSD Adapter (S322M225R)

  • HIGH PERFORMANCE: Create a high-performance storage solution by installing up to two M.2 SATA SSDs into a 2.5" SATA adapter with RAID support for JBOD, SPAN, RAID 0, and RAID 1.
  • HASSLE-FREE SETUP: Open-frame steel mounting bracket with 2.5" SATA form factor fits in any 2.5" SATA bay that supports 7mm tall 2.5" drives. Easy to install with all necessary hardware incl. (M.2 drives and screwdriver not incl.).
  • WIDE COMPATIBILITY: Supports B & B+M key SATA M.2 SSDs in 2230/2242/2260/2280 form factors. Supports SATA I, II, and III (up to 6 Gbps) TRIM, and SMART. M & B+M key NVMe or AHCI PCI-e M.2 SSDs not supported (only SATA supported)..
  • TRIM SUPPORT: TRIM support enhances the stability and performance of your M.2 SSDs plus it provides SMART support. TRIM supported in JBOD and RAID 1, SMART only supported in JBOD..
  • NOTE: Before purchasing this product or your M.2, please confirm if it is a SATA type, via manufacturer specifications/support.
  • if you intend to use JBOD (don't intend to use RAID) then make sure that your SATA port/controller supports Port Multiplier..
Check Stock

StarTech.com 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports - PCIe - Two Slot PCI Express M.2 RAID Card plus Two SATA Ports (PEXM2SAT3422)

  • Add two Next Generation Form Factor M.2 SSDs and two SATA ports to your computer through PCIe.
  • 2x M.2 NGFF SSD RAID Controller Card plus 2x SATA III Ports / PCIe.
  • 2-Slot PCI Express SATA M.2 RAID Card / SATA 3 Controller Host Card Adapter.
  • PCIe SATA Card for almost all SATA M.2 solid-state drives plus port multiplier up to 7 drives.
  • Storage controller supports hardware RAID / NCQ / HybridDrives / SATA3 6Gbps.
  • Perfect for data recovery & backup / Improves the storage & performance of a PC.
Check Stock

ACASIS PCIe SATA Card 10 Port with 10 SATA Cables and 2 SATA Power Splitter Cables, SATA Controller Expansion Card with Standard Profile Bracket, 6Gbps PCIe to SATA 3.0 PCI-E X4 Host Controller Card

  • HIGH-PERFORMANCE: Add six SATA III 6Gbps ports to your desktop computer or server using a PCIe x4 slot to connect SATA drives (HDD/SSD).
  • 6-Port SATA PCIe card features 6x SATA connections for connecting drives using SATA cables (sold separately).
  • ASM1166 CONTROLLER: This PCI Express SATA 3 6Gbps card features single-chip architecture adding six SATA (serial ATA) 6Gbps ports via a single x4 PCIe slot, for combined total bandwidth up to 16Gbps.
  • Supports Port Multiplier & NCQ (Native Command Queue).
  • COMPATIBILITY: Supports PCIe 3.0, SATA 3.2 & AHCI 1.4 Specs, and previous gens at lower performance.
  • Windows (7+), macOS (10.10+), Linux (2.6.32+).
  • Improved motherboard compatibility with no built-in RAID.
  • Supports ATA & ATAPI (HDD, SSD, Optical Disc).
  • EASY INSTALL: Expansion card w/ plug-and-play setup in full or low-profile PCI-e slot (full-profile bracket installed, low-profile incl).
  • Supports storage management systems such as Storage Spaces (Microsoft) , RAID Assistant (macOS), mdraid/mdadm (Linux).
Check Stock

High Point RocketRAID 640L Internal 4 SATA Port PCI-Express 2.0 x4 SATA 6Gb/s RAID Controller -Lite Version

  • Bios boot to RAID with point-to-point connectivity or through port Multiplier.
  • Quick, background or foreground initialization.
  • Oce/orlm (online capacity expansion/online RAID level Migration).
  • Supports up to 4 SATA 6Gb/s and 3Gb/s HDD/SSD.
  • Driver support for Microsoft Windows 7, 2008, Vista, and Linux distributions.
Check Stock

SATA Card 8 Port, PCIE to SATA 3.0 Controller Expansion Board with Low Profile Bracket, SATA3.0 Interface Expansion Card for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 expansion card】Use with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface..
  • 【SATA Controller】Compatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 7/8 / XP / 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface..
  • 【Serial ATA 3.0】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0..
  • 【AHCI1.0 Mode and IDE Mode】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching, and hot plug..
  • 【6.0 Gbit/s / 3.0 Gbit/s / 1.5 Gbit/s Transmission】Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..
Check Stock

Ableconn PEX-SA134 4-Port eSATA III 6Gbps PCI Express Four Lanes Host Adapter Card - AHCI Port-Multiplier PCIe 2.0 x4 Controller Card

  • 1.The PCE-G2S4 PCIE to 4-Ports NONE-RAID SATA III 6Gbps card will allow users add 4X SATA III ports on desktop PCs, servers, and NAS system for HDD/SSD storage expansion or boot use..
  • 2.Based on ASMedia ASM1061SATA III (Serial ATA) advantage HCI controller and ASMedia ASM1093 SATA port multiplier. Provide 4X SATA III 6Gbps ports for PCs and Servers..
  • 3.This model support Windows system only,install the driver before add the SSD/HDD in system...
  • 4.Complies with Serial ATA Revision 3.0. Support SATA III speed 6Gbps, SATA II speed 3Gbps, SATA 1 speed 1.5Gbps. PCE-G2S4 was set default mode on AHCI, it also supports IDE mode or none boot mode. Users can push the mode selector on the mode they need..
  • 5.PCIE Gen 2 X1 interface design, will works on PCIE X1, X2, X4, X8, X16 slot. Users need to check if PCs or Servers have at least one PCIE X1 slot on mother board before purchase..
Check Stock

Vantec 4-Channel 6-Port SATA 6Gb/s PCIe RAID Host Card with HyperDuo Technology UGT-ST644R

  • 4 Channel for 4 storage devices like SSD or HDD. This Card will let You Grow as Your Needs Grow to Add more Devices to your System..
  • Configurable Port as Internal SATA or External eSATA Port, SATA III 6Gb/s on Every Channel for all your SSD and HDD..
  • 1 Port Multiplier Function For Multi-Bay Enclosures (4 drives), Support both FIS and Command-based Switching..
  • RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your Data Safe and Faster Disk Access, Low Profile Bracket Included..
  • Support Windows XP, Server 2003/2008, Vista, 7, 8, 8.1, 10.
  • For RAID use, must do a new clean install of the OS to boot..
  • install only on true PCIe x4 slot or x8 or x16 Slot only, Download Latest drivers from vantecusa website..
  • Note: Cannot Boot If you just move your drive to this controller, write to vantecusa technical support for more info..
Check Stock

Ziyituod PCIe SATA Card, 4 Port with 4 SATA Cable, SATA Controller Expansion Card with Low Profile Bracket, Marvell 9215 Non-Raid, Boot as System Disk, Support 4 SATA 3.0 Devices

  • ➤You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card..
  • ➤4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card..
  • ➤Chipset --- With using The Asmedia1062 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported..
  • ➤For All PCs --- with a low profile Bracket and 4 SATA Cable，compatible with 99% size chassis on the market..
  • ➤System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP /2003 / 7 / 8 / 10 / MAC / NAS / Linux OS..
Check Stock

Broadcom HBA 9400-8e - Storage controller - 8 Channel - SATA 6Gb/s/SAS 12Gb/s low profile - 1.2 GBps - RAID JBOD - PCIe 3.1 x 8

  • 4 Internal SATA 6Gb/s Ports. SATA ports are bootable.
  • Compliant with Serial ATA Specification 3.0. Hot Plug and Hot Swap.
  • Compliant with PCI-Express Specification v1.0.
  • Supports Native Command Queue (NCQ). Supports Port Multiplier FIS Based Switching or Command Based Switching.
Check Stock