Reviews 4 Port Sata Card

eoocvt 5.25 inch Multi-Function USB 3.0 Hub CF TF M2 SD MS Card Reader CD-ROM Front Panel Media Dashboard SATA eSATA Audio Headphone Mic

  • The TCC-QL5E front panel media dashboard is made of ABS material and etched on surface. It is stable with high speed and safety. It is durable as well as beautiful. It is anti-rust and hard to be scrapped..
  • It has build-in USB 3.0 Port, USB 2.0 port, e-SATA, SATA port, 4 pin IDE Power port or DC 12V, Audio, Multi Card Reader, which can command your needs.
  • Power 12V/5V output. Note: 4pin power connector is to pay attention to the direction of connection, otherwise it will cause a short circuit, the product map has the correct link method..
  • 2 USB 3.0 Hub, transfer speed up to 5.0Gbps.
  • 6 USB 2.0 Hub, transfer speed up to 480Mbps.
  • e-SATA port, the transfer speed up to 3.0Gbps.
  • SATA Port, the transfer speed up to 1.5Gbps..
  • Five-in-one Card Reader: Support SD / MMC / CF / MS / TF / M2, At the same time Card reader can only read one memory card..
Check Stock

Padarsey 4 Ports PCI SATA Raid Controller Internal Expansion Card with 2 Sata Cables, PCI to SATA Adapter Converter for Desktop PC Support HDD SSD

  • 【SATA III 1 to 5】SATA3.0 1 to 5 expansion card supports 6-port 6.0Gbps SATA III interface. This expansion card requires the motherboard or expansion card support point (SATA Interface Multiplier) to recognize 5 hard drives. Normal motherboard SATA does not support this function. If not, only one hard disk can be recognized..
  • 【High Performance】SATA III PHY output swing control and automatic impedance calibration. Plug in the SATA or DC2.5 power cord to charge the expansion card. Plug the SATA input cable into the motherboard or expansion card to charge the SATA..
  • 【Meet The Specification】The SATA3.0 expansion card complies with the Serial ATA Port Multiplier specification, the serial ATA port selector specification, the ATA PHY series electrical specification revision 1.0, and the accessory specification ATA series high-speed serialization..
  • 【Support Function】SATA3.0 card supports spread spectrum clock, asynchronous signal recovery, partial/sleep power saving mode, BIST and Loopback mode, interleaved rotation (optional), supports hot swap, asynchronous notification, ATAP driver, SWIT based on order and Fi..
  • 【100% Guarantee】If you have any questions about our products while using them, please feel free to contact our 24/7 customer servic....
Check Stock

T-SIDAKE 5.25 Inch PC Multifunctional Dashboard Media Front Panel Audio with SATA e-SATA Dual USB 3.0 6 Port USB 2.0 Five-in-ONE Card Reader SD/MMC/CF/MS/TF / M2

  • Front panel dashboard are all equipped with high quality material. And the cables can also be kept clean and beautiful in the computer box. It is....
  • It has built-in USB 3.0 port, USB 2.0 port, e-SATA, SATA port, 4 pin IDE power connector or DC 12V, audio, multi-card reader which can command your....
  • 2 USB 3.0 hub, transfer speed up to 5.0Gbps.
  • 6 USB 2.0 hub, transfer speed up to 480Mbps.
  • E-SATA port, the transfer speed up to 3.0Gbps.
  • All-in-one card reader: support SD / MMC / CF / MS / TF / M2, at the same time card reader can only read one memory card..
  • WARRANTY: We promise 1 year limited warranty and worry-free lifetime technical support from Sidake. In the use of products during any product issues,....
Check Stock

PCIe x1 SATA Card 6 Port, SATA 3.0 Controller Expansion Card with 6 SATA Cables & Low Profile Bracket,SATA III PCIE Gen3 Adapter(6Gbps) ASM1166 Chip, Plug and Play on Windows, MAC OS, Linux System

  • ✅【PCIe to SATA 3.0 6 Ports Expansion Card】The pci express sata 3.0 controller card which each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage.Our PCIE 3.0 X1 interface expansion card allows you add AHCI Boot HDD/SSD on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS)..
  • ✅【High Performance PCIe SATA Card 】The 6-port SATA controller card based on ASM1166 chip offers more stable, with heat sink, long-lasting high temperature resistance.The high-quality slots and chip can improve the durability and stability of this card, at the same time, it equipped with 3 upgraded FP solid capacitors which reliable and safe power delivery..
  • ✅【Wide Compatibility】Our PCIe to SATA III 6-port expansion card auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0, compatity with PCIe x1, x4, x8, x16 and support system: Windows XP / 7/8/10 / Linux,compatible with 99% size chassis on the market.Easy to install, plug and play..
  • ✅【What You Get】 1 x PCI Express 6 Ports 1X Card , 6 x SATA cable, 1 x Use Manual, 1 x Low profile Bracket.We provides you with a complete set of perfect match. Note: This SATA card was set on AHCI Boot mode, make sure now PCs SSD/HDD in AHCI Boot Up mode or w....
Check Stock

Cable Matters 2-Pack 15 Pin SATA to 4 SATA Power Splitter Cable - 18 Inches

  • ...cient length for internal cable management to minimize airflow impact in most configurations.
  • Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
  • Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • Universal compatibility with computer power supplies with SATA connectors and popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card.
Check Stock

ASM1166 PCIe X1 SATA Card 6 Ports, Non Raid, Joylifeboard PCIE SATA III Controller Expansion Card 6 Gbps, Support 6 SATA 3.0 Devices, PCIe SATA Card with 6 SATA Cables+Thin Bracket

  • ✿【6 Ports PCIe to SATA 3.0 Expansion Card】: Six SATA 3.0 devices can be added to this PCIE 4X to SATA 3.0 card, a simple and stable solution to expand your sata storage by 6x, compliant with SATA 3 max speed 6Gbps, SATA 2 (3Gbps), SATA 1 (1.5Gbps)..
  • ✿【Wide Compatibility】: This 6 Port PCIE 1X SATA card works on PCIe X1/X4/X8/X16 card slots, improve the stability and compatibility of the card.The SATA Card with 2 size profile brackets supports WinXP/7/8/10, Linux,MacOS ,Ubuntu,Synology,NAS,etc, perfect for IPFS mining rig..
  • ✿【Easy to Install】: Support ACHI 1.0 mode, If the PCs SSD/HDD in AHCI boot up mode, you can insert the hard drive into this sata card directly. No need driver, plug and play. This 6-port PCIe SATA III Controller Card is non raid, data can be protected by OS..
  • ✿【High Performance】: Super heatsink is long-lasting high temperature resistance. 3 solid capacitors can improve the stability of the supply. Support switch based on porter FIS or switch based on command.Chip: ASMedia+ASM1166.
  • ✅【Warm Service】: 6 Indicator LEDs for each SATA channel show which HDD is active and working properly. We are committed to providing high-quality product quality and sales services. Any problem please feel free to contact us, we w....
Check Stock

Adaptec 29160 PCI to Ultra160 SCSI Card Kit with EzSCSI Software

  • 1.The FS-S4-Pro is a PCI Express 3.0 X1 interface(8Gbps) to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Servers, MAC Pro and Network Attached Storage (NAS)..
  • 2.Selected the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • 3. Plug and Play on Windows Server 2019, 2016 ,2012R2, 2012, 2008R2, 2008, 2003R2, 2003(32/64), Windows XP, Vista, 7, 8.x,10 (32/64bit), MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems..
  • 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot..
  • 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 4X max SATA interface power supply for HDD/SSD. 3. Users must make sure PCs/Motherboards have at least one PCIE slot befo....
Check Stock

Ziyituod PCIe SATA Card, 4 Port with 4 SATA Cable, SATA Controller Expansion Card with Low Profile Bracket, Marvell 9215 Non-Raid, Boot as System Disk, Support 4 SATA 3.0 Devices

  • ➤You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card..
  • ➤4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card..
  • ➤Chipset --- With using The Asmedia1062 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported..
  • ➤For All PCs --- with a low profile Bracket and 4 SATA Cable，compatible with 99% size chassis on the market..
  • ➤System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP /2003 / 7 / 8 / 10 / MAC / NAS / Linux OS..
Check Stock

Cable Matters 3-Pack 15 Pin SATA Power Splitter Cable 8 Inches

  • ...es sufficient length for internal cable management in most configurations.
  • Heavy duty SATA splitter with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
  • The hard drive power cable supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • Compatible with popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 5 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card.
Check Stock

Benfei 15 Pin SATA Power Y-Splitter Cable 8 Inches - 2 Pack

  • ...not including connectors) provides sufficient length for internal cable management in most configurations.
  • HEAVY DUTY SPLITTER with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • COMPATIBLE with popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, Asus 24x DVD-RW Serial-ATA Internal OEM Optical Drive, Crucial MX100 256GB SATA 2.5-Inch Internal Solid State Drive, Inateck PCI-E to USB 3.0 5-Port PCI Express Card, Inateck Superspeed 4 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 5 Ports PCI-E to USB 3.0 Expansion Card, Inateck Superspeed 7 Ports PCI-E to USB 3.0 Expansion Card.
Check Stock