Reviews Sata Pci Card - BestBuyersPro.com

PCI 32 BIT Riser Card with Flex Crypto Mining Cable

PCI 32 BIT Riser Card with Flex Cable. 1-slot PCI 32 bits/5V 66MHz riser card with 6" flexible cable..
Authentic only if sold by Micro SATA Cables..
Categories: Drive Adapters, Drive Converters, PCI & PCI-E Products, PCI / PCI-E Cards.

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

LIANSHU 6 Pin PCI-e to SATA Power Cable - 8 Inches ,SATA15Pin M To 6Pin HSG.
Cable material: ULStandard. 18 AWG Full 100%Copper.
PCI EXPRESS VIDEO CARD POWER CABLE Adapter Connects A PCIe Video Card To A Power Supply With A Spare SATA Power Connection,PSU UPGRADE SAVER Power Cable Provides An Option For A Power Supply Without A PCIe Connection For GPU Power..
HSG 6 Pin PCIe To 15 PIN SATA Female To Male Cable Provides A Convenient Solution For Low Power Video Graphics Card That Can Be Powered From A Single SATA Power Connection.STURDY GRAPHICS CARD Power Cable Has A Male SATA Connector With Keyed Rails And A Female PCI Connector With A Latch For A Secure Connection On Each End To Prevent Accidental Disconnections.
VIDEO GRAPHICS CARD Compatible With Graphics Cards From Popular Manufacturers From ASRock, ASUS, EVGA, And Gigabyte.

SATA splitter cable powers up to four Serial ATA HDD, SSD, optical drives, DVD burners, and PCI-E cards from a single connection to computer power supplies.
Snug-fitting drive SATA power cable clicks into place on your power supply to provide a secure connection that prevents accidental disconnection.
Upgrade cost saver SATA power splitter cable spares the expense of upgrading an existing power supply to connect new SATA drives.
Cost-effective 2-pack provides a spare power cable for new installations or repairs.
Keep a spare in your IT toolkit or at the test bench.
DIY or pro installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
18 inch cable harness has 4 SATA drive receptacles spaced at 4.5 inch intervals.
Provides sufficient length for internal cable management to minimize airflow impact in most configurations.
Hdd power cables have 4-SATA 15 pin female receptacles and 1-SATA 15 pin male plug at one end.
Constructed with flexible 18 AWG conductors for reliable performance when connecting four SATA hard drives to a power supply.
Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.

Sata Power Cable Usage: Use one of the SATA power connectors on the power supply to add a Sata 15-pin to 6-pin adapter that allows you to use the SATA power cable to power the video card inside the computer. Provides a cost-effective way to connect the PCI-E video card to the serial SATA power connector provided by the computer power supply..
Connector: 15-pin SATA male connector, and 6-pin female PCI Express card power adapter.
Cable material: 6 Pin PCI-e to SATA Power Cable 18 AWG Full Copper.
Standard length: The SATA power cable has an 8-inch (20 cm) long connector, and the Sata 15-pin to 6-pin adapter is ideal for internal cable management..
Safe connection: Connecting the SATA power cable can reduce the risk of damaging the internal connectors that are difficult to connect and unplug, and can also reduce the tension on the SATA drive or the connector of the computer motherboard.

* Simple to Use : NO Driver required Plug and play, support 2.5 inch solid state drive, 2.5 inch mechanical hard drive, 2.5 inch Blu-ray drive, 3.5 inch mechanical hard drive, 3.5 inch Blu-ray drive, etc. It is widely applied as start-up disk, support hot swappable..
* SATA 3.0 & PCIE V3.0 : Support SATA transfer rate: SATA 3 (6Gbps), SATA 2 (3Gbps), SATA 1 (1.5Gbps). Compliant with PCI-Express specification V3.0 and backward compatible with V2.0. PCI-Express X4 interface, and compatible with PCI-Express X4/X8/X16 slots(recommended to use under PCI-E 3.0, faster)..
* 6 Ports Adapter Card --- You could add 6 6Gbp/s SATA 3.0 devices to your computer with this PCIe SATA card.(4X bidirectional bandwidth theoretical speed up to 8GB/S) ,Support Intelligent Sleep - If you do not operate the computer for 3 minutes, the hard disk will enters an automatic sleep mode , and will automatically activates when rewriting data..
* Multiple Operating Systems Support : Adopt imported solution ASMedia ASM1166/SATA3 solution. It can support multiple operating systems:Compatible with Windows / 8 / 10 / synology /Ubuntu /Linux..
*Package includes 1 * PCIe SATA 3.0 controller card , 6 * SATA cable and 1x 15pin SATA power splitter cable,1* Standard Profile Bracket,1* Low Profile....

Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slot.
PCI Express 20 SATA Controller with HyperDuo SSD Tiering.

Add 2 external or internal SATA 6 Gbps ports to a computer through a PCI Express slot.

Add 2 external or internal SATA 6 Gbps ports to a computer through a PCI Express slot.

Non-Raid 8 Ports SATA Card: This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer. The BIOS of DELL and Lenovo motherboards will shield the third-party adapter card, do not order this SATA controller card if you use the motherboards of these two brands..
Two chips: The use of these two chips enhances heat dissipation, durable high temperature resistance, and more stable operation..
Operation Systems & Driver: Supports Windows 7/8/10. Please install the drivers, otherwise some problems may occur such as "does not work", "Only some ports work", "Only a few indicators are on", "The slot is empty” or “It’s incompatible”. Contact us if you need for the link to download the driver..
Interfaces: Supports PCI-E x1, x4, x8, x16. PCI slot is incompatible. You should power off the SATA PCIe card before inserting it into the motherboard or removing it..
Package includes: 1* 8-Port PCIe SATA Card.