Reviews Salt Level Sensor

Fluval Ribbed Hosing for 306/307 - 406/407 9.8Ft A20015

  • Kamoer ATO one se automatic water replenisher, a good helper for the fish tank at home! It has the function of adding water overtime alarm to prevent water level overflow caused by sensor failure..
  • This ATO is equipped with S1 float sensor, also called anti-overflow sensor (to prevent excessive water replenishment and water overflow), S2 optical sensor (also called water replenishment sensor) and S3 water replenishment bucket level sensor. It detects the water level of the refill bucket. . Usually note: In the case of ATO running normally, S1 is not working, and the float state is sinking. S2 works..
  • In daily use, S2 is a sensor that detects the lowest water level. The function of S1 is to cause the float to rise when the water level exceeds the S2 optical sensor and reaches the S2 float sensor when S2 fails (for example, foam is generated in the sea tank, etc.) Alarm, stop refilling..
  • The float sensor detects whether the water replenishment tank is short of water, and once the water is short, it will stop and alarm..
  • Please install the sensor correctly (the main picture has a picture description), otherwise the product will not work. And the distance between the two sensors is not less than 10cm. The height difference between the make-up bucket and the ....
Check Stock

Saltwater Pool Test Strips, Swimming Pool and Spa Salt Test Strips Kit for Sodium Chloride Content 0-8000 ppm, 25 Count

  • ...mfortable to chlorine. However,it must be maintained regularly to keep clean..
  • WHY MEASURE SALT IN THE POOL: Most saltwater pool require a salt content of 1,500-4,500 ppm as sodium chloride (NaCl) in the swimming pool. If the salt concentration is too high, it can cause damage to saltwater pool. However, if the salt level is too low, this can lead to an unsafe swimming level as there won‘t be enough chlorine produced..
  • FAST TO TEST SALT FOR POOL: Immerse all the testing parts of the test strip into water for 1 second and take it out；Do Not shake excess water off , hold the strip horizontally for 5 seconds；Compare against the color chart and read immediately for accurate results. The ideal salt level for most saltwater pool is 3200 ppm. Before adding salt to your saltwater pool, test the water to check your salt level..
  • SPECIALLY FOR SALTWATER POOL: Each salt pool test strips is made of high quality PET paper that provides instant and reliable results. No need to shake the strip after dipping into water, just wait 5 seconds and faster to get results for your saltwater pool，also swimming pool and hot tub..
  • TIPS FOR ACCURATE RESULTS: Keep wet fingers away from the strips. Read under natural daylight for best results. After you open the product, plea....
Check Stock

HOICATED Digital Salt Pool Tester Range 0-9999ppm for Saltwater Pool Swimming Pool and Koi Fish Pond Salt Level Testing Professional Sodium Chloride Meter

  • Auxiliary tool for salt chlorinator: This salinity tester is specially designed for salt water pool with salt chlorinator generator. It can help to detect the salt level of the salt water pool and ensure the normal operation of the machine. The salt level in the ideal range is 2700ppm to 3400ppm..
  • Application: This salt tester can be used in saltwater pool, swimming pool, koi fish pond and spa. With this tester, save a trip to the pool store. It is not suitable for sea, marine, salt Water fish tank or food..
  • Dual color backlit design: Backlight design guarantees that reading the result can in low light or dark environment. And it has a prompt for the color change of the display, if the salt level is lower than 2700ppm or higher than 3400ppm, the screen will display red. This function can remind that the salt water pool is in an abnormal situation and taking corresponding measures in time is essential..
  • Multifunction: Its function has SALT, EC and TEMP. Salt range: 0-9999ppm. EC range: 0-9999μs/cm & 10.0-19.9ms/cm. EC function general uses for hydroponic system and indoor plant grow..
Check Stock

EXCELFU Flow Switch for Hayward Goldline Salt Chlorine Generator System Pool Flow Sensor for Hayward Salt Cell Aquarite Flow Switch Assembly GLX-FLO-RP with 15-Feet Cable

  • Flow Switch compatible with Hayward Goldline Salt Chlorine Generator System. GLX-FLO-RP replacement can be used with Hayward Goldline TurboCell Salt....
  • Flow Switch for Hayward Salt System: Aqua Rite, Hayward Pro Logic, Mineral Springs MS10/MS11, Aqua Logic, Swimpure +, H-40, Aqua Plus, Aqua Rite XL,....
  • Easy Installation: Screw the flow sensor in the Tee housing (NOT INCLUDED) and plug in the phone jack cable at the controller. Only take a few minutes....
  • The flow switch comes with sealant tape ensure no leaks. Arrow on flow sensor indicates the direction of water flow, ensuring proper installation....
  • Buy with Confidence: Every pool flow switch for Hayward Salt System is backed by 12 Month warranty. If there is any problem, please feel free to....
Check Stock

CQRobot Ocean: Contact Water/Liquid Level Sensor Compatible with Raspberry Pi/Arduino. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc.

  • Contact Water/Liquid Level Sensor, This is a photoelectric water liquid level sensor that is operates using optical principles. Open collector output mode, suitable for connecting various circuits and product applications..
  • The sensor has no mechanical parts, requires no additional adjustment, and has high sensitivity, low power consumption, corrosion resistance, high pressure resistance, high temperature resistance and chemical stability..
  • This sensor probe is small in size and has a structure that can be placed up, down, laterally, and diagonally in multiple orientations to detect solution spillage, dryness and horizontal level. Can be used as a reminder and alarm function..
  • The sensor has a DIP switch. The DIP switch controls the output voltage (high level) of the signal terminal (green line). When the DIP switch is dialed to 5V, the high level is 5V. When the DIP switch is dialed At 3V, the high level is 3.3V..
  • Compatible with Arduino motherboard and Raspberry Pi motherboard. for Automatic Irrigation Systems, Aquariums, Plants, in The Garden, in Agriculture etc..
Check Stock

Saltwater Chlorinator 12g/H Automatic Cleaning Salt Water Pool Chlorine Generator System Complete Functions Simple Operation Pool Chlorine Generator Chlorinator for SPA Swimming Pool

  • 【ADVANCED TECHNOLOGY】Salt chlorine machine, adopts advanced microcomputer technology, simple operation and complete functions..
  • 【AUTOMATIC CLEANING】Automatic cleaning function, to meet the salt and chlorine needs of swimming pools and spas..
  • 【DETECTABLE WATER LEVEL】Support water level detection, when the probe detects water, it is allowed to work..
  • 【REMINDER】Salt level prompt and fault alarm function, power on automatically and memorize the last working status..
  • 【LONG SERVICE LIFE】With water temperature protection (10‑40℃), no water and water shortage protection, prolong service life of salt chlorine....
Check Stock

Electric Salt and Pepper Grinder - USB Rechargeable Electric Grinder - Adjustable Ceramic Grind for Black Peppercorn - Automatic Pepper Mill Grinder - 1xRed

  • ... grinder with transparent sliding compartment window. Easy to refill of salt or pepper for home kitchen, restaurants, outdoor parties or BBQ. Happy filling, easy grinding..
  • [Safety and Power saving] Power Switch of the unit to be switch OFF for battery changing, transportation or cleaning. The switch control gravity sensor and LED head light. Top adjustment knob allow you to select the most suitable coarseness for pepper or salt grinding. From fine to coarse, all of your choice. Easy cleaning by turning off the adjustment knob and ceramic core..
  • [Chic Design] Hybrid casing, 85ml spice compartment with easy to fill transparent sliding cover in back side, safety power button to activate gravity sensor and LED light. Fast and automatic gravity induction grinding, durable and 4 batteries power up to 1,000 times of daily use. Cool home gadgets and 2022 apartments must haves kitchen accessories!.
  • [Perfect gift ideas] Trendy design, automatic grinding, battery operated, economical budget and giftable. Perfect home and kitchen gift, housewarming gifts for new home, friends and colleagues and great office gifts, party gift, wedding gifts or present for husband or wife..
  • Tip 1: Item sold in 1 piece. Buy 2 pieces to form an electric salt and pepper grinder set....
Check Stock

YCKYIGO Salt Water Pool Tester Large Range 7 in 1 Multi-Parameter Tester for Salt Swimming Pool and Spa

  • 【Wonderful Helper for Pool Salinity Measurement】This salinity meter is perfect for testing the salinity of swimming pools. It helps you to detect the salt level in your salt system. Scale range: 0~9999 ppm/10.0~200 ppt and 0.00-25.00%..
  • 【Detects Free Chlorine Levels】The ORP value is a measure of the oxidative power or sterilization strength in water pool salt. The higher the ORP value in water, the stronger the oxidative power and sterilization ability. The ORP's can reflect the residual chlorine (FAC) levels in the Saltwater pool..
  • 【Highly Sensitive PH Probe】A low pH means the water is acidic, which can be corrosive to pool equipment and pool surfaces. It may also cause skin and eye irritation. A high PH value can greatly reduce the effectiveness of chlorine and cause the water to become cloudy. To avoid problems, it’s important to try and keep it within the ideal range of 7.4–7.6. This PH test pen will do the job perfectly..
  • 【Platinum Electrodes for TDS】Total Dissolved Solids (TDS) is a measurement of all dissolved solids in pool water. The higher the TDS reading, the harder it is to maintain clea....
Check Stock

Yamaha Seascooter RDS300 with Camera Mount Recreational Dive Series Underwater Scooter , Black / Red, Large

  • YAMAHA RDS300 SEASCOOTER - Is lightweight and powerful. Designed to cruise at speeds up to 3. 0mph (4. 8km/h) the RDS300 will allow you to maximize your underwater dive experience.
  • FEATURING – 2 - level rotational speed control system provides speeds up to 3 mph / 4. 8 km/h, a depth rating of 100ft (30m) with a run time up to 1. 5 hours with normal use.
  • WATERPROOF CONSTRUCTION - Prevents accidental flooding is impact resistant heavy duty rubber hull protection.
  • SUPERIOR SAFETY FEATURES – includes auto shut off when triggers are released, thermal switch function and water leakage sensor.
  • REMOVABLE BUOYANCY - Control chamber, The RDS300 is designed for use in salt water. It will have less buoyancy in fresh water, and may slowly sink in fresh bodies of water.
Check Stock

Optimum Pool Technologies Replacement Flow Switch for Pentair IntelliChlor IC20 & IC40 Salt Cell - Replaces 520736

  • Replaces: Pentair Intellichlor Flow / Temp Switch Model Number 520736 (IC-20 & IC-40 Systems).
  • 4 Wire connection, Arrow on switch indications the direction of water flow, ensuring proper installation.
  • Manufactured by Optimum Pool Technologies. Please see product video for installation instructions..
  • Does not read salt level* This product ONLY fixes water FLOW and water TEMP issues with the IntelliChlor Salt Cells. THIS DOESN'T READ THE SALT LEVEL. THIS WILL NOT FIX A LOW SALT READING..
  • Refer to Troubleshooting Tips as well as Wiring Diagrams on this product page for product assistance. Red and Black/Blue wires detect the flow, White and Green wires read temperature. If replacing this flow switch doesn't fix the salt cell problem, it is likely that the whole cell needs to be replaced..
Check Stock