Reviews Round Saw Blade

Jet, Small Grizzly, Powermatic 64 Table Saw Zero Clearance Insert by Peachtree Woodworking PW956 Approx Dims 12-1/2 in x 3-1/2 in x 7/16 in

  • ...RDER. Zero Clearance inserts are table saw specific. Since every table saw brand and manufacturer is different, we recommend that you measure the exact length, width and thickness of your table saw insert or opening and compare it to the size we list. Also be aware of the shape of your current insert of whether its round, square ends or if there are any indents or protruding notches. Insert colors may vary from images shown..
  • If you own a table saw, then you probably have had smaller pieces of wood get caught between the saw blade and the factory supplied throat plate opening. This can cause that piece of wood to jam up against the blade and go flying across the room or worse yet, right back at you. Zero clearances help minimize this situation from happening since there is no gap between the blade and the zero clearance opening. The opening is more like a custom slot cut to the exact width of your table saw blade..
  • Another great reason to use a zero clearance insert is to help reduce that pesky and irritating tear out you always tend to get on your cuts. Without a zero clearance, the wood has no support by the blade to prevent the wood from tearing out. This is especially true when cutting plywood. Zero clearance inserts help prevent tear out by essent....
Check Stock

COMOWARE Circular Miter Saw Blade- 10 inch 80 Tooth, ATB Premium Tip, Anti-Vibration, 5/8 inch Arbor Light Contractor and DIY General Purpose Finishing for Wood,  Laminate, Plywood & Hardwoods

  • UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation..
  • HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness..
  • WIDELY USE: The 10" saw blade has a 5/8" diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use..
  • EXCELLENT ATB STYLE: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time..
  • USE GUIDE: The equipment should be equipped with the safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust..
Check Stock

COMOWARE Circular Saw Blades 7 1/4 inch - 40 Tooth ATB, Premium Tip, Anti-Vibration with 5/8 inch Arbor Light Contractor and DIY General Purpose for Wood, Laminate, Veneered Plywood & Hardwoods

  • UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. The 40 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation..
  • HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness..
  • WIDELY USE: The 7-1/4" saw blade has a 5/8" diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use..
  • Excellent ATB Style: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time..
  • USE GUIDE: The equipment should be equipped with safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust..
Check Stock

WuliFANX Mini Table Saw Liftable, Electric Mini Table Saw Stepless Speed Regulation LED Display, Handmade Bench Lathe Stainless Steel Integrated Spindle with Protective Plate

  • ○[ONE MACHINE WITH MULTIPLE FUNCTIONS]: The sliding table of the electric mini table saw has a variety of functions, which can be operated with both hands, safe and reliable, accurate than the angle push ruler, does not damage the material, and runs smoothly. It can be used for round copper slotting and falcon splicing. , Mahogany slotted, etc.
  • ○[DETAILS]: The mini table saw has a lifting function, the saw blade is raised clockwise, and the saw blade is lowered counterclockwise.
  • the double marking of 0-180 degrees can meet the multi-angle cutting.
  • the reserved vacuum port can be connected to the vacuum cleaner. Dustproof.
  • the transparent protective plate is safe and reliable.
  • the stainless steel integrated car spindle tells the DC high-power motor gear to increase the torque transmission.
  • ○[INSTALLATION PROCESS]: For manual bench lathes, first the open-end wrench clamps the main spindle, the two-angle wrench covers the splint, and the thread splint is removed.
  • after connecting the steel sleeve and the spindle, tighten the screw with a wrench, and install the chuck and the grinding disc.
Check Stock

VICSEC 110V 6800W Electric Concrete Saw 14" Wet/Dry Circular Saw with 135 Saw Blade and Rolling Pulley Masonry Cutting Tool for Granite, Porcelain, Wood,Concrete, Stone, etc.

  • 【Powerful motor and heat dissipation function】： This new circular saw concrete cutting machine has a power of 6800W and a motor speed of 4600r/min, which greatly improves work efficiency, and has 360° all-round heat dissipation, so there is no need to worry about damaging the machine under high-intensity operations，safe to use..
  • 【Dust-proof design, wet and dry use】:The tile saw adopts a dual integrated dust management system is adopted, and the dust extraction port discharges cutting debris in time.
  • the water inlet accessory is built in during wet cutting, and the convenient valve controls the flow, and the water pipe supplies water to the blade to reduce dust, Improve blade performance and life.
  • 【With rolling pulley, cutting labor saving】: The wall chaser concrete cutter has its own roller design, which saves effort, and can be flexibly installed or disassembled according to the actual situation..
  • 【Sharp cutting, all-round protection】: The cement saw is equipped with a sharp saw blade with a diameter of 350mm, and the cutting depth can reach 130mm..
Check Stock

PROXXON Chop and Miter Saw KGS 80, 37160 , Green

  • For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood.
  • Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned.
  • Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals.
  • Integrated tightening mechanism with self-centering clamps, V-groove for round pieces, front side groove for clamping thin work pieces.
  • Scope of delivery: 1x PROXXON Chop and Miter Saw KGS 80 including carbide tipped saw blade. Part number: 37160.
Check Stock

KAKA Industrial BS-912B horizontal bandsaw 9\x12\Horizontal Metal Cutting Band Saw 4 Steps Blade Speed Metal Band Saw, Space Saver Movable Metal Cutting Band Saw 115V&230V Dual Voltage Prewired 1PH

  • Industry best 10 amp motor of the metal band saw is designed with controlled power to withstand any jobsite application.
  • The portable band saw has industry best 5-inch deep cut capacity for round or rectangular stock.
  • Serviceable steel shroud and rubber bumpers of DEWALT band saw allow guards to withstand jobsite abuse without damage.
  • LED sight light allows the user to see cut line in dark jobsite environment.
  • Integrated hang hook allows user to hang the saw without damaging front handle or castings.
  • Variable speed dial allows user to vary speed for specific materials and various applications (100-350 spm).
  • Multi-position adjustable large front handle offers the user plenty of hand space for a more accurate cut.
  • Superior balance and ergonomics allows for more accurate cuts and less user fatigue.
  • Blade tracking adjustment increases blade life by providing better blade tracking.
  • Dual bearing blade guide rollers increase durability in the blade support system.
Check Stock

Sili Saw Blade Sleeve • 10 inch Saw Blade Protector • Protects 10 inch Table Saw and Circular Saw Blades

  • If you’re like most DIY’ers or woodworkers, you have a few saw blades laying around your garage or workshop. You could make a saw blade rack out of scrap lumber or maybe stack the blades in a corner exposing your blade cutters to getting chipped. The best solution is to protect your blades by simply slipping a blade into a Sili Saw Blade Sleeve. Once in a sleeve, you can hang your blade up and out of the way! All the while protecting you and your saw blade from harm while its not in use..
  • Made from a softer silicone rubber material, the Sili Saw Blade Sleeve is perfect for protecting your saw blades. While some blades are inexpensive compared to others, why not protect your blades from the daily rigors of job site or workshop use to get the absolute most out of them. The silicone material neatly wraps around the teeth of your saw blade and won’t mark or mar the blade..
  • These are the ideal storage solution for contractors. With each of your blades protected with a Sili Saw Blade Sleeve, you’ll know that when you get to the next job your blades are ready to go! No more changing blades and seeing a chipped tooth or two rendering the blade useless. Not only will the Sili Saw Blade Sleeves save you time, but they’ll save you money by cutting back ....
Check Stock

Huanyu Mini Table Saw Multifunctional Liftable Blade 6T with Miter Gauge 300W Power DIY Woodworking Handmade Tool 885 Motor Cutting Polishing Carving Punching Metal Jade Plastic (Fits Group 3, Golden)

  • ...nctional table saw gives you the perfect processing experience!.
  • 【ACCESSORIES GROUP】 -【G1: alloy woodworking saw blade can cut wood / acrylic / ABS plastic, etc. -【G2: On the basis of G1, a drill chuck and grinding disc are added, which can be used for polishing, and it can be drilled with the drill bit. The rounder can round the material. -【G3: On the basis of G2, HSS saw blades, alloy steel saw blades, grinding wheel saw blades are added, which can cut metal, beeswax, jade, PVC, plastic and other materials. Added flexible shaft !.
Check Stock

Metabo HPT Jig Saw, Variable Speed (CJ160V)

  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
  • Includes: CJ160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (x10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter, Sub Base, Carrying Case.
  • Auto-mode feature runs the tool at half power and ramps up to full power once a load is detected for easier starts, less vibration and more control.
  • 7. 0 amp motor, intense power for the toughest woodworking jobs.
  • Electronic speed control maintains SPM while cutting.
  • Stroke length of 1-1/32", Ideal for many woodworking applications.
  • Tool-less blade changing system for quick and easy blade replacements.
  • Multi-position switch, to angle blade for beveled cuts.
  • Included Components: Cj160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (X10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter (321591), Sub Base (339018), Carrying Case (339017).
Check Stock